• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.66.1-66.1
• /
• 2010

Microcrystalline silicon at low temperatures has been developed using plasma enhanced chemical vapor deposition (PECVD). It has been found that energetically positive ion and atomic hydrogen collision on to growing surface have important effects on increasing growth rate, and atomic hydrogen density is necessary for the increasing growth rate correspondingly, while keeping ion bombardment is less level. Since the plasma potential is determined by working pressure, the ion energy can be reduced by increasing the deposition pressure of 700-1200 Pa. Also, correlation of the growth rate and crystallinity with deposition parameters such as working pressure, hydrogen flow rate and input power were investigated. Consequently an efficiency of 7.9% was obtained at a high growth rate of 0.92 nm/s at a high RF power 300W using a plasma-enhanced chemical vapor deposition method (27.12MHz).

• Food Science and Preservation
• /
• v.23 no.5
• /
• pp.718-726
• /
• 2016

Sweet pumpkin paste (SPP) was fermented by Leuconostoc mesenteroides SM at $25^{\circ}C$ for 3 days for enhancing its physicochemical properties. SPPs with 5%, 10%, and 15% solid contents (SC) were fortified with 20% sucrose and 0.5% yeast extract. The unfermented SPP with 15% SC indicated L, a, and b color values of 25.02, 4.66, and 13.35, respectively, and a consistency index of $48.6Pa{\cdot}s^n$. During the 3 days of fermentation, both the a and b color values decreased slightly, whereas the consistency index increased to $188.8Pa{\cdot}s^n$, giving the fermented product a pudding-like consistency. This fermented SPP (15% SC) showed the highest acid production and viable cell counts among samples, indicating pH 3.85, 1.30% acidity and $9.2{\times}10^8CFU/mL$ respectively. The added sucrose was completely utilized after 1 day of fermentation. After 3 days, the insoluble and soluble dextran contents were 8.9% and 4.5%, respectively. Furthermore, the contents of mannitol and fructose were 3.11% and 1.76%, respectively. Regarding the sensory evaluation, this fermented sample also indicated the highest color, taste and texture scores, and was the overall preferred sample. In conclusion, the fermented SPP with 15% SC was carotinoid-rich a wholesome pumpkin-based product that is rich in probiotics and lactic bacteria-produced mannitol and dextran, which gave the product an acceptable viscous pudding-like consistency and good organoleptic properties.

• Journal of Korean Neurosurgical Society
• /
• v.59 no.3
• /
• pp.292-295
• /
• 2016

Objective : To investigate the variation of pelvic radius and related parameters in low-grade isthmic lumbar spondylolisthesis. Methods : Seventy-four patients with isthmic lumbar spondylolisthesis and 47 controls were included in this study. There were 17 males and 57 females between 30 and 66 years of age, including 30 with grade I slippages and 44 grade II slippages; diseased levels included 34 cases on L4 and 40 cases on L5. Thoracic kyphosis (TK), the pelvic radius (PR), the pelvic angle (PA), pelvic morphology (PR-S1), and total lumbopelvic lordosis (PR-T12) were assessed from radiographs. Results : Statistically significant differences were found for the PA, PR-T12, and PR-S1 ($24.5{\pm}6.6^{\circ}$, $83.7{\pm}9.8^{\circ}$, and $25.4{\pm}11.2^{\circ}$, respectively) of the patients with spondylolisthesis and the healthy volunteers ($13.7{\pm}7.8^{\circ}$, $92.9{\pm}9.2^{\circ}$, and $40.7{\pm}8.9^{\circ}$, respectively). The TK/PR-T12 ratios were between 0.15 and 0.75. However, there were no differences in all the parameters between the L4 and L5 spondylolysis subgroups (p>0.05). The TK and PR-S1 of grade II were less than grade I, but the PA was greater. The PR-T12 of female patients were less than male patients, but the PA was greater (p<0.05). Conclusion : Pelvic morphology differed in patients with low-grade isthmic lumbar spondylolisthesis compared to controls. Gender and the grade of slippage impacted the sagittal configuration of the pelvis, but the segment of the vertebral slip did not. Overall, the spine of those with spondylolisthesis remains able to maintain sagittal balance despite abnormal pelvic morphology.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.12 no.2
• /
• pp.46-53
• /
• 2014

Purpose: We conducted this study in order to determine clinical features and prognostic factors in adults with acute tetrodotoxin (TTX) poisoning caused by ingestion of puffer fish. Methods: In this retrospective study, 107 patients were diagnosed with TTX poisoning. The subjects were divided into two groups according to duration of treatment; Group I, patients were discharged within 48 hours (n=76, 71.0%), Group II patients were discharged after more than 48 hours (n=31, 29.0%). Group II was subsequently divided into two subgroups [IIa (n=12, 11.2%), IIb (n=19, 17.8%)] according to the need for mechanical ventilation support. Results: In multivariable logistic regression analysis, the predictors of the need for treatment over 48 hours were dizziness (odds ratio [OR], 4.72; 95% confidence intervals [CI], 1.59-12.83), time interval between onset of symptom and ingestion (OR, 0.56; 95% CI, 0.16-0.97), $PaCO_2$<35 mmHg (OR, 8.37; 95% CI, 2.37-23.59). In addition, predictors of the need for mechanical ventilation were a time interval between onset of symptoms and ingestion (OR, 0.54; 95% CI, 0.11-0.96) and $PaCO_2$<35 mmHg (OR, 5.65; 95% CI, 1.96-18.66). Conclusion: Overall, dizziness, time interval between onset of symptoms and ingestion, ${\Delta}DBP$ and $PaCO_2$<35 mmHg predict the need for treatment over 48 hours, time interval between onset of symptoms and ingestion and $PaCO_2$<35 mmHg predict the need for mechanical ventilation support after acute TTX poisoning.

• Korean Journal of Materials Research
• /
• v.14 no.3
• /
• pp.163-167
• /
• 2004

TiAl(La)N thin films were oxidized in vacuum of about 7 Pa to reduce the oxidation of WC-Co as a substrate. The oxidation rate constants of the thin films were quantified by an assumption of parabolic oxidation. Increasing AI content significantly decreased the parabolic oxidation rate constant. A simultaneous addition of AI and La was more effective to reduce the oxidation rate. The parabolic oxidation rate constant of $Ti_{0.66}$ $Al_{0.32}$ $La_{ 0.02}$N thin film at 1273 K showed about ten times lower than that of TiN. The addition of a small amount of La with Al induced the preferential formation of dense $\alpha$ $-Al_2$$O_3$ film in oxide film, leading to the abrupt reduction of oxidation rate.

• Journal of Chest Surgery
• /
• v.21 no.5
• /
• pp.911-917
• /
• 1988

Pulmonary thromboembolism originated most commonly from the venous thrombus, especially deep vein thrombus in the leg, which migrated to and occluded the pulmonary vasculatures. The failure of clot lysis and repeated embolic episodes resulted in the hemodynamic compromise -that is- in the increasing in the pulmonary vascular resistance, which would cause the right ventricle failure[Car Pulmonale]. Under the cardiopulmonary bypass, 20 year old male patient was treated successfully by thromboembolectomy of pulmonary thromboembolism with pulmonary hypertension, which originated from the deep vein thrombus in the leg. The results of radiologic studies and clinical evaluations were excellent in that the postoperative lung perfusion scan showed the newly increased perfusion of post-embolectomy territories and in the arterial blood gas finding of 76 from 66[mmHg] in PaO2. The patient was uneventful and discharged on postop. $ 14 days with anticoagulant continued.

• Journal of Power System Engineering
• /
• v.14 no.4
• /
• pp.23-28
• /
• 2010

Of the roughly four million known substances, about 60,000 are processed and sold ; many of these must be dried. Many materials are processed in the liquid state - ideal for mixing and reacting - but most products are needed or wanted as dry, or relatively dry, solids. Usually operation is just below atmospheric pressure, as with direct dryers, but some are built for vacuum operation with pressures as low as 26.66kPa abs.. In spite of the global-class aquiculture agriculture and fisheries technology of our country, the processing technologies are lags behind the other nations relatively. These problems are considered to be caused directly by the lack of drying technologies. This paper is concerned to the experimental results of drying heat transfer characteristics for the green energy type vacuum dryer for the high quality agriculture and fisheries production.

• Journal of Chest Surgery
• /
• v.13 no.1
• /
• pp.66-71
• /
• 1980

This is one case report of coexisting two histologically different carcinomas in the different lobes of the right lung, which operated the right pneumonectomy in the Dept. of Thoracic and Cardiovascular Surgery Hanyang University Hospital. The 43 years old male patient complained coughing, blood tinged sputum and weight loss. The chest films [PA and lateral view] showed a small round hazy shadow in the posterior segment of the right upper lobe and irregular hazy densities in the right middle lobe and hilar area. Histopathologically, the tumor in the posterior segment of the right upper lobe was consisted of a tissue of adenocarcinoma and the tumor in the right middle lobe was consisted of a tissue of well-differentiated bronchial squamous cell carcinoma.

• Food Science and Biotechnology
• /
• v.16 no.1
• /
• pp.62-66
• /
• 2007

Four different biopolyester films, two aliphatic polyesters including polylactides (PLA) and poly(3-hydroxy-butyrate-co-3-hydroxyvalerate (PHBV), and two aliphatic-aromatic copolyesters including Ecoplex and Biomax, were prepared using by thermo-compression, and their tensile and water barrier properties were determined. Among the films tested, PLA film was the most transparent (T: 95.8%), strongest, and stiffest (TS, 40.98 MPa; E, 1916 MPa), however it was rather brittle. In contrast, Ecoplex film was translucent while being the most flexible and resilient (EB, 766.8%). Biomax film was semitransparent and was the most brittle film tested (EB, 0.03%). All biopolyester films were water resistant exhibiting very low water solubility (WS) values ranging from 0.0.3 to 0.36%. PHBV film showed the lowest water vapor permeability (WVP) value ($1.26{\times}10^{-11}\;g{\cdot}m/m^2{\cdot}sec{\cdot}Pa$) followed by Biomax, PLA, and Ecoflex films, respectively. The water vapor barrier properties of each film were approximately 100 times higher than those of carbohydrate or protein-based films, but about 100 times lower than those of commodity polyolefin films such as low-density polyethylene (LDPE) or polypropylene (PP).

• International Journal of Automotive Technology
• /
• v.6 no.5
• /
• pp.507-511
• /
• 2005

Recently, many solution have been suggested to development of plastic products. Among many manufacturing technologies for plastic parts, the injection molding process is very attractive because of its low production cost and short cycle time. In this paper, the plastic ball seat of a ball joint, one of the essential components for automotive suspension or steering system, was studied to enhance its mechanical performance and durability by using PA66 that is reinforced polymeric plastic resin. But ball seat has some trouble in manufacture process. And strength of molded part is not enough to use. For the quality stabilization and reliability of injection molded parts, we designed the mold cavities through analytical simulation software and tested the mechanical performance for the injection molded ball-seat parts. After modification, tensile strength increases by about $13.5\%$. Strength and quality stabilization is improved.