• Journal of dental hygiene science
• /
• v.9 no.3
• /
• pp.265-270
• /
• 2009

This research provides the point of view by operating SPSS(14.0) about effective management and marketing focusing on customer by comparing and analyzing the effect which affects loyalty for the dental clinic and the rapport occurring when the dental worker communicates affirmatively with customers. The data was gathered from 300 customers visiting to a private dental clinic through the self-administered questionnaire in Jinju, Gyeng-nam. The communication(.017) and value property(.006) of service provider affects the rapport significantly. Last, the trust(.000), value property(.023) and the rapport(.000) affect the loyalty-a result variable-significantly.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.7
• /
• pp.791-794
• /
• 2014

In this work, a 300 GHz imaging detector has been developed and image has been acquired in a 65-nm CMOS technology. The circuit was designed based on the square-law of MOSFET devices. The fabricated detector exhibits a maximum responsivity of 2,270 V/W and minimum NEP of $38pW/Hz^{1/2}$ at 285 GHz, and NEP< ${\sim}200pW/Hz^{1/2}$ for 250~305 GHz range. The chip size is $400{\mu}m{\times}450{\mu}m$ including the probing pads and a balun, while the core of the circuit occupies only $150{\mu}m{\times}100{\mu}m$.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.2
• /
• pp.151-155
• /
• 2017

Purpose: The aim of this study was to evaluate screw removal torque of the two-piece zirconia abutment with the novel titanium component compared to the conventional one-piece titanium abutment in the internal connection implant before and after dynamic cyclic loading. Materials and methods: Two types of the abutment assemblies with internal connection were prepared and divided into the groups; titanium abutment-titanium abutment screw assemblies as control, and zirconia abutment-titanium socket-titanium abutment screw assemblies as experimental group. A total of 12 abutments and implants were used of six assemblies each group. Each assembly was tightened to 30 Ncm. A cyclic load of 300 N at an angle of 30 degrees in reference to the loading axis was applied until one million cycles or failure. The removal torque values (RTVs) of the abutment screws were measured with a digital torque gauge before and after cyclic loading. The RTVs of the pre load and post load were analyzed with t-test, and P-values < .05 were considered statistically significant. Results: The assemblies of both groups survived all after the dynamic cyclic loading test without screw loosening. The statistically significant differences were found between the mean RTVs before and after the cyclic loading in both groups (P < .05). The RTV differences for the control and the experimental group were $-7.25{\pm}1.50Ncm$ and $-7.33{\pm}0.93Ncm$, respectively. Statistical analysis revealed that the RTV differences in both groups were not significantly different from each other (P > .05). Conclusion: Within the limitation of this study, the two-piece zirconia abutment with the titanium component did not show a significant RTV difference of the abutment screw compared to the titanium abutment after dynamic cyclic loading.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12a
• /
• pp.163-165
• /
• 2011

본 연구에서는 해부학강의에 있어 혼합강의의 적용가능성을 평가하였다. 2007~2009년 매 1학기동안 강원대학교 의과대학 간호학과 학생(n=143)을 대상으로 해부학강의를 가상강의 9회, 면대면 강의 3회, 사체해부실습 2회로 구성된 혼합강의로 실시한 후 설문을 통해 자기평가요인(만족도, 난이도, 흥미도, 유용성, 평가의 적절성, 학업성취도, 운영의 적절성, 이론실습연계성), 학업성취별 자기평가요인, 자기평가요인간의 상관관계를 분석하였다. 자기평가요인의 난이도는 평균$2.96{\pm}0.63$점으로 전반적인 강의수준은 적절했던 것으로 나타났고 나머지 모든 요소들은 평균 3.82~4.21점 사이로 평가되어 간호학과에서 해부학강의를 위한 혼합강의의 적용이 매우 긍정적인 것으로 나타났다. 학기종료 후 화보한 최종성적을 기준으로 세 그룹(상위, 중위, 하위)으로 나누어 자기평가요인과의 관계를 분석한 결과, 모든 요소에서 통계적으로 유의하지 않았다(p>0.05). 자기평가요인 간의 상관관계는 난이도와 전공연계성의 유용성(r=0.300, p<0.0003),혼합강의의 유용성(r=0.210, p<0.0137), 평가의 적절성(r=0.323, p<0.0001), 이론실습연계성(r=0.216 0.0097)이 높을수록 상관성을 보였다, 만족도, 전공연계성의 유용성, 혼합강의의 유용성, 이론실습연계성에서는 학업성취도를 제외한 모든 요소에서, 흥미도는 난이도와 학업성취도를 제외한 모든 요소에서 유의성 있게 높은 상관성을 보였다. 하지만 학업성취도에서는 평가의 적절성을 제외한 다른 요소에서는 연관성을 보이지 않아 성적과 관련해 영향을 미치는 요소가 없다는 것으로 판단되어지며 본 연구를 위해 도입된 강의구성이 해부학의 균형 있는 학업성취를 유도할 수 있는 수업방식이라 판단되었다. 결론적으로 본 연구를 통해 해부학강의에 있어 혼합강의의 우수한 교육효과를 알 수 있었고, 간호학과만이 아닌 최근 급증하고 있는 의료-보건계열의 다양한 전공자를 위한 적용, 확대로 해부학지식의 질적 향상과 강의수요에 비해 부족한 해부학 전공 교수진들의 교육 부담을 경감할 수 있는 효과적인 교수법으로 활용가치가 있다고 사료된다.

• Membrane Journal
• /
• v.2 no.2
• /
• pp.122-128
• /
• 1992

A study on the citric acid production was performed in various size dual hollow fiber bioreactors with immobilized Aspergillus niger (KCTC 1232). The final dry cell mass density reached 300g/l based on the space volume available for cell growth. Under air and oxygen aeration the volumethe productivity reached 0.63 and 1.02g/l.h, which cormsponded to 10 and 16 fold over those of batch fermentation, respectively. The initial pH of the medium was a critical factor and the lower value resulted in higher citric acid yield. The increase in the feeding rate of medium or the number of reactor unit resulted in the improvement of the productivity due to higher consumption rate of substrate.

• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.331-343
• /
• 2017

In this study to improve stability, workability and economics of the H-Pile+Earth plate or H-Pile+Earth plate+Cutoff grouting currently in use, we had developed HCS method belonging to the retaining wall which is consisting of a combination H-Pile, Plastic Sheet Pile and Steel Square Pipe for gap maintenance and reinforcement of flexible plastic Sheet Pile, and the behavior of each member composing HCS method is investigated by three-dimensional finite element analysis. To numerically analyze the behavior of the HCS method, we have performed extensive three-dimentional finite element analysis for three kinds of plastic Sheet Pile size, two kinds of H-Pile size and three kinds of H-Pile installation interval, one kinds of Steel Square Pipe and three kinds of Steel Square Pipe installation interval. After analyzing the numerical results, we found that the combinations of $P.S.P-460{\times}131.5{\times}7t$ (PS7) and H-Pile $250{\times}250{\times}9{\times}14$ (H250), $P.S.P473{\times}133.5{\times}9t$ (PS9) and H-Pile $300{\times}200{\times}9{\times}14$ (H300) is the most economical because these combinations are considered to have a stress ratio (=applied stress/allowable stress) close to that as the stiffness of H-Pile, plastic Sheet Pile and Steel Square Pipe composite increased, the horizontal displacement of the retaining wall and the vertical displacement of the upper ground decreased. Especially, due to the arching effects caused by the difference in stiffness between H-Pile and plastic Sheet Pile, a large part of the earth pressure acting on plastic Sheet Pile caused a stress transfer to H-Pile, and the stress and displacement of plastic Sheet Pile were small. Through this study, we can confirm the behavior of each member constituting the HCS method, and based on the confirmed results of this study, it can be used to apply HCS method in reasonable, stable and economical way in the future.

• Journal of the Korean Chemical Society
• /
• v.52 no.1
• /
• pp.66-72
• /
• 2008

The photocatalytic degradation of a textile diazo dye in aqueous solution has been investigated under Solar and UV-A light. The effect of various parameters such as concentration of dye, amount of catalyst and pH on the degradation of dye has been studied. Addition of hydrogen peroxide, ammonium persulphate and isopropanol strongly influences the degradation rate. Kinetic analysis of photodegradation reveals that the degradation follows approximately pseudo first order kinetics according to the Langmuir-Hinshelwood model. Carbon dioxide, nitrate and sulphate ions have been identified as mineralisation products. The photocatalyst ZnO was found to be more efficient in UV-A light than in Solar light.

• Journal of the Korean Society of Groundwater Environment
• /
• v.4 no.3
• /
• pp.116-121
• /
• 1997

Pilot wetland reactor systems to test acid mine drainage treatment efficiencies for metals were designed and operated at the Dalsung mine and surveyed the operating problems. pH and Eh (redox potential) were measured in situ and anayses of Cd, Pb, As, Zn, Cu, Fe, Al and Mn were carried out in the laboratory. Maximum metal removal efficiencies of the reactor containing the rice stalks, the cow manure and limestones were that Cu, Zn, Fe, Cd, Al, Mn and Pb were lowered by 98%, 100%, 99%, 100%, 97%, 61% and 100%, respectively and at that time the pH and Eh of the effluents from the reactor were 6 and about -300 mV. However, the redox potential was raised and removal of metal elements except aluminium was decreased with operation time. It suggests that the reduced condition is very important for the metal removal. During the operation, problems such as scaling in pipes and volume change of the substrate within the reactor occurred, which were preventing the flow of main drainage in pipes and reactor.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.4
• /
• pp.293-300
• /
• 2012

In this study, the delamination analysis has been implemented to investigate the initiation and propagation of crack in composite laminates composed of orthotropic materials. A simple modeling was achieved by moving nodal technique without re-meshing work when crack propagation occurred. This paper aims at achieving two specific objectives. The first is to suggest a very simple modeling scheme compared with those applied to conventional h-FEM based models. To verify the performance of the proposed model, analysis of double cantilever beams with composite materials was implemented and then the results were compared with reference values in literatures. The second one is to investigate the behavior of interior delamination problems using the proposed model. To complete these objectives, the full-discrete-layer model based on Lobatto shape functions was considered and energy release rates were calculated using three-dimensional VCCT(virtual crack closure technique) based on linear elastic fracture mechanics.

• Journal of the Korean Dietetic Association
• /
• v.27 no.4
• /
• pp.276-292
• /
• 2021

There is a dearth of Korean studies on dehydration, one of the health risks for adult women. This study analyzed the subjects of the 2016~2018 National Health and Nutrition Examination Survey (KNHANES) to investigate the relationship between nutrient intake ratios and sedentary time in dehydrated women. Body mass index and waist circumference in the dehydrated group (DG) were significantly higher than the normal group (NG). Intake of other liquids in the DG was significantly higher than in the NG, but total water intake in the DG was significantly lower than in the NG. Compared to the 600 sedentary minutes or more per day group, the odds ratio of dehydration was significantly higher in the less than 300 sedentary minutes per day group (1.871 [95% CI: 1.579~2.215], P<0.001). Compared to the drinking over 6.0 cups of water per day group, the odds ratio of dehydration was significantly higher in the 3 cups or fewer per day (OR [95% CI] is 1.198 times [1.019 to 1.408], P<0.05), and 6.0 cups or fewer group (OR [95% CI] is 1.162 times [1.018 to 1.326], P<0.05). The results of this study showed that the total water intake was relatively lower in the ≥600 sedentary minutes per day group compared to the 300 sedentary minutes per day group, making them more vulnerable to dehydration. The nutrient intake ratios were higher in the dehydration group than in the normal group. In conclusion, emphasis should be placed on the importance of hydration and nutrition education for adult women in the workplace.