• Journal of Life Science
• /
• v.25 no.2
• /
• pp.237-242
• /
• 2015

The use of calcite-forming bacteria (CFB) in crack remediation and durability improvements in construction materials creates a permanent and environmentally-friendly material. Therefore, research into this type of application is stimulating interdisciplinary studies between microbiology and architectural engineering. However, the mechanisms giving rise to these materials are dependent on calcite precipitation by the metabolism of the CFB, which raises concerns about possible hazards to cement-based construction due to microbial metabolic acid production. The aim of this study was to determine target microorganisms that possibly can have bio-corrosive effects on cement mortar and to assess multi-functional CFBs for their safe application to cement structures. The chalky test was first used to evaluate the $CaCO_3$ solubilization feature of construction sites by fungi, yeast, bacterial strains. Not all bacterial strains are able to solubilize $CaCO_3$, but C. sphaerospermum KNUC253 or P. prolifica KNUC263 showed $CaCO_3$ solubilization activity. Therefore, these two strains were identified as target microorganisms that require control in cement structures. The registered patented strains Bacillus aryabhatti KNUC205, Arthrobacter nicotianae KNUC2100, B. thuringiensis KNUC2103 and Stenotrophomonas maltophilia KNUC2106, reported as multifunctional CFB (fungal growth inhibition, crack remediation, and water permeability reduction of cement surfaces) and isolated from Dokdo or construction site were unable to solubilize $CaCO_3$. Notably, B. aryabhatti KNUC205 and A. nicotianae KNUC2100 could not hydrolyze cellulose or protein, which can be the major constituent macromolecules of internal materials for buildings. These results show that several reported multi-functional CFB can be applied to cement structures or diverse building environments without corrosive or bio-deteriorative risks.

• Korean Journal of Food Science and Technology
• /
• v.11 no.4
• /
• pp.242-248
• /
• 1979

To detect proper lytic assay conditions of the crude zumolyase from Arthrobacter luteus, effets of the various factors involved in the lytic system of Sacchromyces sake cultured with shaking in the malt extracts medium were investigated. The results are summarized as follows : 1. The susceptibilities of viable cells of S. sake from logarithmic growth phase to the lytic enzmye were much greater than those of the cells in lag and stationary phases. The cells cultured for 18 hr were the most susceptible to the enzyme. 2. Lytic activity of the enzyme toward the viable cells of S. sake was very low. It was, however, enhanced 4 folds of more by the pretreatment of the cells with 0.05 M sodium sulfite. 3. Lytic activity of the enzyme toward commercial baker's yeast cells was negligible, and the effect of sodium sulfite on the lysis of the cells also was nothing but a little. 4. The lyophilized cells of the baker's yeast showed more susceptibility to the lytic enzyme than viable cells of the yeast. No definite effect of sodium sulfite on the lysis of the lyophilized cells, however, was observed either baker's yeast of S. sake. 5. It appeared that the relationship between the reaction rate and the enzyme concentration on the lysis of the yeast cell walls followed enzyme kinetic theory, but one between the reaction rate and concentration of the yeast cells as substrates showed different pattern from that in enzyme kinetic theory. 6. After the preparation of crude zymolyase was kept at $7^[\circ}C$ for 10 days in the 0.05 M phosphate buffer, pH 7.5, the remainning lytic activity was about 80 %.

• Korean journal of food and cookery science
• /
• v.21 no.2 s.86
• /
• pp.235-242
• /
• 2005

This study investigated the sensory characteristics of mixtures of high-intensity sweeteners for beverage and estimated the shelf life during storage. Sensory characteristics of mixtures of sweeteners (Aspartame/ Acesulfame-K, Aspartame/Sucralose and Acesulfame-K/Stevioside) were evaluated in aqueous (ranging from 90:10 to 50:50) and citrate buffer (ranging from 90:10 to 50:50) solutions. Significant synergistic effects were found in Aspartame/Acesulfame-K and Aspartame/Sucralose mixtures. No significant differences were found in other taste attributes (astringency, bitterness, metallic taste etc.). Aspartame/Acesulfame-K 5:5 solution showed the most acceptable sensory attributes. $Q_10$ values of Aspartame and Acesulfame-K mixture in citrate buffer (ranging from 90:10 to 50:50) solution were calculated from the temperature data (between $40^{\circ}C\;and\;50^{\circ}C$) determined by HPLC. $Q_10$ values were in the range of 2.01-2.25. Their shelf lives were calculated to be lengthened with increasing Acesulfame-K mixture ratio. Their shelf lives in Aspartame/Acesulfame-K 5:5 citrate buffer solution estimated at $20^{\circ}C\;and\;30^{\circ}C$ were 178 days and 88 days, respectively.

• Korean Journal of Dental Materials
• /
• v.45 no.4
• /
• pp.233-242
• /
• 2018

The purpose of this study is to evaluate the effect of resin cement color on the color of commercially available zirconia crown. The zirconia and resin cements used for the experiment were $NuSmile^{(R)}$ ZR Zirconia LT Shade (LT), $RelyX^{TM}$ U200 TR, A2, and A3O (TR, A2, A3O). The disks of zirconia and resin cements with diameters of 5 mm and thicknesses of 1 mm were prepared. Five disks were made for each specimen. The CIE $L^*a^*b^*$ values of zirconia, resin cements and the combinations thereof were measured on black and white backgrounds, respectively, using a spectrophotometer. The color effect of resin cement on the color of the zirconia crown was evaluated by calculating translucency parameter (TP), contrast ratio (CR), and color differences (${\Delta}E{^*}_{ab}$) based on the measured CIE $L^*a^*b^*$ values. The statistical significances were verified by one-way ANOVA and the Tukey-multiple comparisons tests. As a result, the TP and CR values were decreased (p<0.05) and increased, respectively, in the combination of zirconia and resin cement disks compared to zirconia disk per se. When using the black background, the ${\Delta}E{^*}_{ab}$ values between zirconia and the combination of the zirconia and three resin cement disks were imperceptible level. The A3O showed the lowest ${\Delta}E{^*}_{ab}$ value among three resin cements. When using the white background, the ${\Delta}E{^*}_{ab}$ values between zirconia and the combination of zirconia and TR resin cement (LT/TR) disks showed acceptable level. However, the ${\Delta}E{^*}_{ab}$ values between zirconia and the combination of zirconia and A2 resin cement (LT/A2) disks showed unacceptable level. Meanwhile, the ${\Delta}E{^*}_{ab}$ values between zirconia and the combination of zirconia and A3O resin cement (LT/A3O) disks showed perceptible but acceptable level. Within the limits of this study, the colors of resin cements did not cause unacceptable color changes of zirconia except the combination of LT/A2 on the white background. The resin cement that gave the least color changes to zirconia was A3O. This means that the resin cement A3O is recommended to use for minimizing color changes when cementing commercially available zirconia crown to tooth.

• Geophysics and Geophysical Exploration
• /
• v.11 no.3
• /
• pp.242-249
• /
• 2008

Recently, AVO analysis has been widely used in oil exploration with seismic subsurface section as a direct indicator of the existence of the gas. In the case of the deep reservoirs like the gas reservoirs in the East-sea, it is often difficult to observe AVO responses in CMP gathers even though the bright spots are shown in the stacked section. Because the reservoir becomes more consolidated as its depth deepens, P-wave velocity does not decrease significantly when the pore fluid is replaced by the gas. Thus the difference in Poisson's ratio, which is a key factor for AVO response, between the reservoir and the layer above it does not increase significantly. In this study, we analyzed the effects of Poisson's ratio difference on AVO response with a variety of Poisson's ratios for the upper and lower layers. The results show that, as the difference in Poisson's ratio between the upper and lower layers decreases, the change in the reflection amplitude with incidence angle decreases and AVO responses become insignificant. To consider the limitation of AVO responses shown in the gas reservoir in East-sea, the velocity model was made by simulation Gorae V structure with seismic data and well logs. The results of comparing AVO responses observed from the synthetic data with theoretical AVO responses calculated by using material properties show that the amount of the change in reflection amplitude with increasing incident angle is very small when the difference in Poisson's ratio between the upper and lower layers is small. In addition, the characteristics of AVO responses were concealed by noise or amplitude distortion arisen during preprocessing. To overcome such limitations of AVO analysis of the data from deep reservoirs, we need to acquire precisely reflection amplltudes In data acquisition stage and use processing tools which preserve reflection amplitude in data processing stage.

• The Korean Journal of Pesticide Science
• /
• v.6 no.4
• /
• pp.287-292
• /
• 2002

To establish effective and safe control method against Phytophthora root rot caused by Phytophthora capsici on tomato in hydroponic culture, three pesticides, oxadixyl copper hydroxide 8% WP, metalaxyl copper oxychloride 15% WP, and dimethomorph. dithianon 38% WP at 4 concentration levels were tested on potato dextrose agar medium inoculated with Phytophthora capsici. All pesticides inhibited mycelial growth, but two pesticides of them, metalaxyl copper oxychloride WP and dimethomorph. dithianon WP, were selected as effective pesticides for the efficacy test in a hydroponic culture. Forty days after transplanting of tomato seedlings, 4 ml of sporangia of P. capsici (about 25 sporangi/ml) per plot was inoculated around tomato plant root, and then 5 days after inoculation, the pesticides diluted at 5,000 times were drenched 1, 2 or 3 times per plot on the culture cube at 15 days interval. Fifteen days after drenching, tomato fruits and hydroponic culture solution were sampled for the analysis of pesticide residues. Dimethomorph was detected 0.001 and 0.003 mg/kg in tomato of the plots sprayed 2 and 3 times with dimethomorph dithianon WP of which detection levels were far below compared with 1.0 mg/kg of the Korean MRL of dimethomorph on tomato. Incidences of Phytophthora root rot were $30.5{\sim}50%$ in the plots drenched at 1 or 2 times with metalaxyl.copper oxychloride WP, and $16.7{\sim}25%$ in the plots treated with dimethomorph dithianon WP. However, there was no incidence of Phytophthora root rot in the plots treated at 3 times with both of pesticides, showing no phytotoxic effect. Based on the results, the drenching of these pesticides on the culture cube could be recommended as a very safe and effective control method for Phytophthora root rot in tomato.

• Clinical and Experimental Pediatrics
• /
• v.46 no.3
• /
• pp.242-249
• /
• 2003

Purpose : We studied the relationship between anthracycline cumulative dose and anthracycline cardiotoxicity in childhood cancer and followed up 40 children with anthracycline cardiotoxicity. Methods : A retrospective study was performed in 154 children who received anthracycline chemotherapy between January 1995 to December 2000. Cardiotoxicity was defined when the left ventricular fractional shortening(FS) was below 26%; it was divided into two groups, mild and severe cardiotoxicity, according to the FS. We followed up survivors with cardiotoxicity, and checked their present cardiac function by physical activity, echocardiography, electrocardiography(EKG) and chest X-ray. Results : Of the 154 children treated with anthracyclines, forty(26.0%) were diagnosed as cardiotoxicity. The incidence of cardiotoxicity increased in exponential fashion with increases in the cumulative dose of anthracyclines. There was minimal increase of incidence until a dose of $300mg/m^2$ after which the incidence increased rapidly. After mean $3.8{\pm}1.8year$ follow-up of 23 survivors with cardiotoxicity, FS increased significantly. EKG and chest X-rays were not helpful for the diagnosis of cardiotoxicity because of their low sensitivity and specificity. Conclusion : Although convenient, non-invasive and inexpensive, EKG and chest X-rays were not helpful for the follow-up of anthracycline cardiotoxicity. Almost all survivors with anthracycline cardiotoxicity have improved in both physical activity and echocardiographic findings after discontinuation of anthracyclines.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.9 no.2
• /
• pp.242-248
• /
• 2006

Purpose: Neonatal hepatitis is the major cause of neonatal cholestasis and may be divided into infectious, metabolic, genetic, and idiopathic neonatal hepatitis. Non-familial, non-metabolic, and non-A, B, C viral neonatal hepatitis is known to have made satisfactory progress, but little is known about its chronic clinical features. Methods: Clinical and histological assessments were carried out in 34 cases with chronic neonatal hepatitis [elevated serum alanine aminotrasferase (ALT) level for more than 6 months] except for A, B, C viral hepatitis, metabolic, or genetic neonatal hepatitis, who were admitted to the Department of Pediatrics, Pusan National University Hospital, from January 1998 to January 2004. Results: Males were more common (70%). Jaundice (100%) and hepatomegaly (44%) were frequent manifestations. Peak serum ALT levels were most commonly below 300 IU/L in 41.2% of patients and peak serum direct bilirubin levels were most commonly between 1.0~5.0 mg/dL in 50% of patients. Ten cases (34%) of 29 patients had positive serum cytomegalovirus (CMV) IgM or urine CMV polymerase chain reaction. Serum ALT level was normalized within 1 year in 11 (37.9%) of 29 cases, and within 2 years in 9 (69.2%) of 13 cases. Serum ALT level was elevated persistently over 2 years in four (30.7%) of 13 cases. Histologic findings such as portal or periportal activity, lobular necrosis, portal or periportal fibrosis were more severe in patients with persistent ALT elevation over 2 years than in those showing normalization of ALT within 2 years (p>0.05). Conclusion: When the elevation of ALT level sustains over 1 year in non-familiar, non-metabolic, non-A, B, C viral neonatal hepatitis, an assessment of the severity of liver injury and a careful monitoring about chronic liver disease may be required.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.4
• /
• pp.242-245
• /
• 2009

In order to investigate the cytotoxic effect of hexavalent chromium ($Cr0_3$) and the protective effect of Nelumbo nucifera GAERTN (NNG) extract, cultured cerebral neuroglial cells (C6 glioma cells) were treated with $4{\sim}55{\mu}M$ concentrations of $Cr0_3$ for 48 hours. Cell viability was measured by XTT assay. The superoxide dismutase (SOD)-like activity for the antioxidant effect was also examined on the extract of NNG stamen. In this study, $Cr0_3$ significantly decreased cell viability dose-dependently. The cytotoxicities of $XTT_{90}$ and $XTT_{50}$ determined with $10{\mu}M$ and $55{\mu}M$ of $Cr0_3$, respectively, showed that the $Cr0_3$ had highly toxic effect on cultured C6 glioma cells by the cytotoxic criteria. In the protective effect of NNG extract, the cell viability was significantly increased by the treatment of NNG extract, and NNG extract increased SOD-like activity. From these results, it is suggested that $Cr0_3$ showed highly toxic effect on cultured C6 glioma cell s and NNG extract was very effective in the protection of $Cr0_3$-mediated cytotoxicity by antioxidative effect in these cultures.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.3
• /
• pp.56-60
• /
• 2009

Purpose: The various studies and efforts to develop program are in progress in the field of nuclear medicine for the purpose of reducing scan time. The Oncoflash is one of the programs used in whole body bone scan which allows to maintain the image quality while to reduce scan time. When Those applications are used in clinical setting, both the image quality and reduction of scan time should be considered, therefore, the purpose of this study was to determine the criteria for proper scan speed. Materials and Methods: The subjects of this study were the patients who underwent whole body bone scan at the departments of nuclear medicine in the Asan Medical Center located in Seoul from 1st to 10th, July, 2008. The whole body bone images obtained in the scan speed of 30cm/min were classified by the total counts into under 800 K, and over 800 K, 900 K, 1,000 K, 1,500 K, and 2,000 K. The image quality were assessed qualitatively and the percentages of those of 1,000K and under of total counts were calculated. The FWHM before and after applying the Oncoflash were analyzed using images obtained in $^{99m}Tc$ Flood and 4-Quadrant bar phantom in order to compare the resolution according to the amount of total counts by the application of the Oncoflash. Considering the counts of the whole body bone scan, the dosed 2~5 mCi were used. 152 patients underwent the measurement in which the counts of Patient Postioning Monitor (PPM) were measured with including head and the parts of chest which the starting point of whole body bone scan from 7th to 26th, August, 2008. The correlations with total counts obtained in the scan speed of 30cm/min among them were analyzed (The exclusion criteria were after over six hours of applying isotopes or low amount of doses). Results: The percentage of the whole body bone image which has the geometric average of total counts of under 1,000K among them obtained in the scan speed of 30cm/min were 17.6%(n=58) of 329 patients. The qualitative analysis of the image groups according to the whole body counts showed that the images of under 1,000K were assessed to have coarse particles and increased noises. The analysis on the FWHM of the images before and after applying the Oncoflash showed that, in the case of PPM counts of under 3.6 K, FWHM values after applying the Oncoflash were higher than that before applying the Oncoflash, whereas, in the case of that of over 3.6 K, the FWHM after applying the Oncoflash were not higher than that before applying the Oncoflash. The average of total counts at 2.5~3.0 K, 3.1~3.5 K, 3.6~4.0 k, 4.1~4.5 K, 4.6~5.0 K, 5.1~6.0 K, 6.1~7.0 K, and 7.1 K over (in PPM) were $965{\pm}173\;K$, $1084{\pm}154\;K$, $1242{\pm}186\;K$, $1359{\pm}170\;K$, $1405{\pm}184\;K$, $1640{\pm}376\;K$, $1,771{\pm}324\;K$, and $1,972{\pm}385\;K$, respectively and the correlations between the counts in PPM and the total counts of image obtained in the scan speed of 30 cm/min demonstrated strong correlation (r=.775, p<.01). Conclusions: In the case of PPM coefficient over 3.6 K, the image quality obtained in the scan speed of 30cm/min and after applying the Oncoflash was similar to that obtained in the scan speed of 15 cm/min. In the case of total counts over 1,000 K, it is expected to reduce scan time without any damage on the image quality. In the case of total counts under 1,000 K, however, the image quality were decreased even though the Oncoflash is applied, so it is recommended to perform the re-image in the scan speed of 15 cm/min.