• Polymer(Korea)
• /
• v.31 no.4
• /
• pp.329-334
• /
• 2007

Osmotic pellet system, which is one of the oral drug delivery systems, has been developed to improve manufacturing process, reduce product cost and other problems of osmotic tablet systems. Osmotic pellet is consisted of water swellable seed layer, drug layer, and membrane layer. Among them, the membrane layer plays an important role in a control of the drug release. In this work, we examined the effect of ratio for Eudragit RL and RS on the drug release behavior. Osmotic pellet with nifedipine as a model drug was easily obtained in a good yield by fluidized bed coater. Osmotic pellet showed round morphology with a range of size $1300{\sim}1500\;{\mu}m$. In the experiment of nifedipine release, the release amount increased with the increase of the ratio of Eudragit. This is due to the fact that Eudragit RL contains more hydrophilic quaternary ammonium group than Eudragit RS. Additionally, the release amount was retarded with increasing the membrane thickness. There are no differences in the release amount measured at the different pH 1.2, 6.5, 6.8, and 7.2. In conclusion, it was found that the drug release from osmotic pellets depended on the composition ratio and coating thickness of membrane layer.

• Korean Journal of Pharmacognosy
• /
• v.24 no.2
• /
• pp.166-176
• /
• 1993

This study was attempted to investigate the acute toxicity in mice, the subacute toxicity in rats of Cynanchi wilfordii Radix extract, the effect on transaminase activities, hematological parameters, leukocyte parameters in serum of subacute-toxicated rats. In acute toxicity test, the death rate was not observed in 50, 100, 200, 300 mg/kg(i.p.), one tenths to two tenths in 300, 500, 1000, 1500 mg/kg(p.o.) for two weeks. In subacute test, rats were all died in 300 mg/kg(p.o.) during 4 weeks, in 500, 1000 mg/kg(p.o.) during three weeks. The cause of death believed to be stomach ulcer. The activities of S-GOT and S-GPT were significantly increased in all sample-treated groups, when compared with the normal groups. A number of WBC and neutrophil belong to hematological parameter were significantly increased, lymphocyte was decreased in all sample-treated group, when compared with normal group. The hemolytic action on water extract, saponin and alcohol extract showed very low activities.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.6
• /
• pp.700-708
• /
• 2019

To verify the possibility of using resistograph to estimate the age of big old living trees, we selected three Zelkova serrata and seven Pinus densiflora in Goesan. The mean diameters at breast height of Z. serrata and P. densiflora were 102 (92-116) cm and 80 (65-110) cm, respectively. The heights measured from the ground using a resistograph ranged at 1.2-4.3 m and 0.6-1.1 m for Z. serrata and P. Densiflora, respectively. The most appropriate needle speed to determine tree-ring boundaries for measuring ring width was 1500 r/min for both tree species. Alternatively, the suitable feed speeds for Z. serrata and P. densiflora were 50 cm/min and 150 cm/min, respectively. From the measured data, the mean numbers of tree rings of Z. serrata and P. densiflora were 57 (43-68) and 104 (93-124), respectively, and the mean tree-ring widths were 4.27 mm (3.18-5.09 mm) and 2.93 mm (2.32-3.34 mm), respectively. A comparison between the time series of tree-ring widths by resistograph and that from the local master chronologies tallied for the heartwood part. Finally, this study showed that resistograph can be used to estimate tree ages when a local master chronology is available.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.312-322
• /
• 2006

The objectives of this study were to evaluate the effect of surface roughness on the surface color and translucency of the composite resins. Two composite resins (Esthet-X, Dentsply, Milford, USA and Charisma, Kulzer, Domagen, Germany) were used to investigate the surface color. Charisma was used to investigate the translucency. 40 disc samples (diameter: 8 mm, thickness: 5 mm) were made by each product to measure the surface color. Polymerized each sample's one side was treated by Sof-Lex finishing and polishing system (Group C, M, F, SF). 40 disc samples (diameter: 6 mm, thickness: 1 mm) were prepared to measure the opacity. 1 mm samples were ground one side with #600, #1000, #1500 and #2000 sandpapers. CIE $L^{*}a^{*}b^{*}$ values of each 5 mm thickness samples, and XYZ values of 1 mm thickness samples on the white and black background were measured with spectrophotometer (Spectrolino, GretagMacbeth, Regensdorf, Switzerland). Mean surface roughness (Ra) of all samples before and after surface treatment was measured using the Surface Roughness Tester SJ-301 (Mytutoyo, Tokyo, Japan). Regardless of type and shade of the composite resin, $L^{*}$ values measured in group C were higher than others (p < 0.05), and $L^{*}$ value decreased as the Ra value decreased except B3 shade of Esthet-X. But there were no significant difference in $a^{*}$ values among groups. In control group and SF, highest $b^{*}$ values were measured (p < 0.05), except B1 shade of Esthet-X. Contrast ratio decreased as the Ra value decreased (p < 0.05). With the above results, difference of surface roughness has influence on surface color and translucency of dental composite resins.

• Polymer(Korea)
• /
• v.32 no.2
• /
• pp.103-108
• /
• 2008

Osmotic pellet, which consisted of water-swellable seed layer, drug layer, and porous membrane layer, has been widely utilized in oral drug delivery system. In this work, we describe the preparation of osmotic pellet with nifedipine as model drug and a mixture of cellulose acetate (CA) and Eudragit RS as membrane layer, and then examined the drug release behavior on the variation of the thickness change of membrane layer (CA and Eudragit RS) and release media. Furthermore, we examined the nifedipine release behavior using sodium alginate as a potential membrane candidate. Osmotic pellet was obtained in the quantitative yield by fluidized bed coater. Osmotic pellet exhibited the round morphology and the size ranging $1500{\sim}1700{\mu}m$ in SEM. The nifedipine release decreased as the thickness of membrane layer (CA and Eudragit RS) increased. In addition, it observed that there is difference of release amount in between intestinal juice (pH 6.8) and gastric juice (pH 1.2). In the case of osmotic pellet coated with sodium alginate, nifedipine release behavior depended on the crosslinking of sodium alginate layer. In conclusion, we found that various membrane layers could control the release amount of nifedipine.

• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.80-88
• /
• 2023

Ensuring safety in the designing of manufacturing and handling facilities for low-density polyethylene (LDPE) is difficult because there are no standards for the dust explosion characteristics of LDPE. In this study, a dust explosion test was performed on two dust samples collected from a bag filter (LDPE 1) during the LDPE manufacturing process and sedimentary dust (LDPE 2) leaked outside a facility such as a silo, and the LDPE 2 explosion test results were summarized. Particle size analysis showed that the volume-based particle diameter (median) was 95.04 ㎛ and the number density was 0-1 ㎛. The maximum explosion pressure (P_max) was 6.6 bar, and the maximum rate of explosion pressure rise was 366 [bar/s] at 1500 g/m³. Accordingly, the dust explosion index (K_st) was 99.4 bar·m/s, which was confirmed as ST-1 grade. Moreover, the minimum ignition energy and minimum ignition temperature was 10 mJ and 450 ℃, respectively. Currently, manufacturing and handling design is based on the characteristic values of high-density polyethylene (HDPE). However, as the test results show that LDPE 2 dust has a higher risk than HDPE (particle diameter 61.6 ㎛), caution is required when using the HDPE design criteria in the LDPE manufacturing process.

• Electrical & Electronic Materials
• /
• v.7 no.3
• /
• pp.243-251
• /
• 1994

ITO(Indium Tin Oxide) film with thickness of 1500.angs. was prepared by an e-beam evaporator onto a glass and a p-type InP wafer (100) LEC grown Zn-doped p=2.3*10$\^$16/cm$\^$-3/), in which the components of ITO used for evaporation source were hot pressed pellets 1 mole% ln$\_$2/O$\_$3/+9 mole% SnO$\_$2/, and evaporated in O$\_$2/ ambient. The optimum conditions to preparation of ITO thin film were the substrate temperature of 350.deg. C, the injected oxygen pressure of 2*10$\^$-4/ torr, and the evaporation speed of 0.2-0.3.angs./sec, respectively. In these optimum conditions, the resistivity and the carrier concentration were 5.3*10$\^$-3/ .ohm.-cm, 6.5*10$\^$20/cm$\^$-3/, and the transmittance was over 80%. From the results of J-V measurements in ITO/p-InP structure solar cells, the higher pressure of injected oxygen, the more open circuit voltage. The efficiency of ITO/p-InP solar cell without the grid line contact, prepared by the optimum evaporation conditions, was 7.19%. By using the grid line contact, the efficiency, the open circuit voltage, the short circuit current density, the fill factor, the series resistance, and the shunt resistance were 8.5%, 0.47V, 29.48 mAcm$\^$-2/ , 61.35%, 3.ohm., and 26.6k.ohm., respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.43.2-43.2
• /
• 2010

In this study, metallurgical grade (MG) silicon with 99% purity produced by arc furnace process was systematically investigated for slag refining. The most problematic impurities to remove from MG silicon are boron (B) and phosphorus (P). To remove B and P from MG-silicon, we used synthetic slag in the molten state. MG-silicon with synthetic slag of CaO, $SiO_2$, and $CaF_2$ was melted using by high-frequency induction furnace with electrical output of 50kW. Specimens prepared by various refining process conditions(holding time, mixture ratio) were inspected by combined analysis of ICP-MS and XRF. With this approach, B has been reduced to <5ppm, P to <1ppm and other impurities to 0.1~0.2% except for Calcium. Calcium has been increased from 17ppm to 1500ppm. Problem of calcium contamination will be resolved by additional refining processes.

• Toxicological Research
• /
• v.11 no.2
• /
• pp.181-185
• /
• 1995

To know the mechanism of biphenyl dimethyl dicarboxylate (DDB) in the protection of chemically induced hepatotoxicity, the activity of glutamic pyruvic tran.saminase (GPT) and the level of lipid peroxidation metabolite (malondialdehyde, MDA) and ATP content in hepatocytes were determined in serum and primarily cultured hepatocytes. For in vibo study, rats were pretreated with DDB (300 mg/ kg, p.o.)for 7 days. DDB pretreatment efficiently reduced the elevation of serum GPT activity induced by carbon tetrachloride (1.6 ml/kg, s.c.) and acetaminophen administration (1500 mg/kg, i.p.). In ex vivo study, hepatocytes were isolated from the rats pretreated with DDB (300 mg/kg, p.o.)for 7 days and cultured for 12 hrs before inducing cytotoxicity with chemicals. The MDA formation and the GPT release induced by adriamycin $(1\times10^{-4} mg/ml)$ and cisplatin $(2\times10^{-4} mg/ml)$ were markedly decreased in the hepatocytes from the rats pretreated with DDB as compared to vehicle only. However, DDB pretreatment did not prevent the decrease of ATP contents of hepatocytes induced by cisplatin and adriamycin. In in vitro experiment, DDB was pretreated in primary cultured hepatocytes for 3 days. DDB enhanced the decreases of ATP contents induced by cisplatin and adriamycln. These results suggest that DDB may protect the hepatocytes from injury induced by hepatotoxlcants through inhibiting the lipid peroxidation.

• Journal of Korean Neurosurgical Society
• /
• v.56 no.4
• /
• pp.334-337
• /
• 2014

Objective : The purpose of this study is to identify the risk factors associated with the development of germinal matrix-intraventricular hemorrhage (GM-IVH) and the relationship of the severity of disease and prematurity. Methods : A total of 168 premature neonates whose birth weight ${\leq}1500g$ or gestational age ${\leq}34$ weeks were examined by cranial ultrasound (CUS) for detection of GM-IVH among the babies admitted between January 2011 and December 2012 in our medical center neonatal intensive care unit. The babies were divided into two groups : GM-IVH and non-IVH. Clinical presentations, precipitating factors of the patients and maternal factors were analyzed. Results : In univariate analysis, gestational age, birth weight, delivery method, presence of premature rupture of membrane (PROM) and level of sodium and glucose were statistically meaningful factors (p<0.05). But only two factors, gestational age and presence of patent ductus arteriosus (PDA) were statistically meaningful in multivariate logistic regression (p<0.05). Delivery method [normal vaginal delivery (NVD) to Caeserean section] was borderline significant (p<0.10). Conclusion : Presence of PDA and gestational age were the important risk factors associated with development of GM-IVH.