• 지구물리와물리탐사
• /
• 제12권3호
• /
• pp.246-254
• /
• 2009

균질매질과 자유면 경계에서 선형입자운동을 하는 파를 타원형 입자운동을 하는 파로부터 분리하기 위한 새로운 분극필터를 다성분 복소트레이스 분석법에 근거하여 개발하였다. 균질매질에서의 입자운동을 모사한 합성파를 통해 이 필터의 성능을 검증한 결과, P파와 레일리파의 수평성분/수직성분 진폭비 $C_L$과 $C_R$를 알고 있을 경우, 이 분극필터는 레일리파 성분을 완벽하게 제거하여 이상적인 결과를 보인다. 이 분극필터 결과의 수직성분 오차는 $C_R$/$C_L$에 따라 증가하고, 수평성분 오차는 $C_R$ $C_L$에 따라 증가한다. 특히 수직성분 오차는 $C_L$과 $C_R$의 적용값/모델값 비율($C_L'$/$C_L$와 $C_R'$/$C_R$)이 작을 때 급격히 증가하며, 입사각이 작을 때는 $C_R'$/$C_R$에, 클 때는 $C_L'$/$C_L$에 각각 민감하다. S파와 레일리파가 중첩되어 있는 경우는, 입사각이 P파 입사각의 보각인 경우와 동일하다.

• 지질공학
• /
• 제6권3호
• /
• pp.137-153
• /
• 1996

본 연구는 이미 알려져 있는 공동 지역에서 1년 6개월에 걸친 고정점 관측 및 이동 관측망에 의한 실험을 통하여 지하 매질에 공동이 존재할 때에 나타나는 지진파의 이상 현상에 의하여 지하에 존재하는 공동을 탐지 및 식별할 수 있는 가능성을 찾는데 그 목적이 있다. 한양 대학교 지진 연구소에서는 경기도 화성군 봉담면에 위치한 삼보 광산에서 고정 지진 관측을 수행하였다. 이 자료의 대부분은 인근 골재 채취장에서의 화약류 발파에 의한 것이며 본 연구에서는 이 화약류 발파에 의한 자료를 이용하였다. 고정 관측소 관측의 경우 지상 관측과 삼보 광산의 갱도 안에서의 지하 관측을 수행하였다. 이 두 자료으 경우 종파의 초동 후 150 ~ 250 msec 후에 전환파(converted phase)의 출현에 의하여 편파 특성이 매우 급격하게 변하는 양상을 보여 준다. 전환파가 발생하는 깊이는 평균 약 190m 정도로서 삼보 광산의 갱도 깊이와 잘 일치되는 결과를 보여 준다. 또한 횡파 분열(Shear-wave Splitting) 현상이 관측되었다. 빠른 횡파(fS)와 느린횡파(sS)의 시간 차이는 약 30-60ms 정도의 차이(평균 42 ms)를 보인다. 이러한 결과는 다른 연구의 결과보다는 상당히 큰 값을 보여 주는데 이는 지하 공동에 의한 균열(Crack)이 상당히 발달해 있는 것을 나타내는 결과이다. 또한 화약 발파 실험에 의한 자료는 공동에 설칠한 지진계와 비공동 지역에 설피한 지진계를 비교 분석하였다. 공동 지역에서 설치한 지진계의 경우 고정 관측소의 경우와 같이 종파의 초동후에 편파 특성이 매우 급격하게 변하는 양상을 보이나 비공동 지역에 설치한 지진계의 경우는 편파 특성이 매우 안정적인 양상을 보인다. 또한 공동 지역을 지난 지진파의 특징은 현저한 고주파수 성분의 감쇄와 탁월한 저주파의 성질을 갖는 위상이 관측되었다.

• 감성과학
• /
• 제26권3호
• /
• pp.41-52
• /
• 2023

본 연구의 목적은 회복탄력성이 정보처리에 미치는 영향을 연구하기 위함이다. 본 연구에서는 남자 고등학생 39명을 무작위로 추출한 다음 회복탄력성 척도(KRQ-53) 점수에 따라 상위집단(13명), 중간집단(13명), 하위집단(13명)에 무선 할당하였다. 실험 과제는 단순반응시간, 선택반응시간-1, 그리고 선택반응시간-2 였다. 피험자가 과제를 실시하는 동안 Fp1, Fp2, F3, F4, Fz, Cz, Pz, C3 영역에서 사상관련전위(ERP)를 측정하였다. 본 연구의 결과, 첫째 세타파의 경우 중간집단이 상위 및 하위 집단보다 높게 나타났다. 둘째, 알파를 분석한 결과, 상위집단이 중간 및 하위집단보다 알파파가 높게 나타났다. 셋째, 미드-베타파를 분석한 결과 하위 및 중간집단의 미드 베타파가 상위집단보다 높은 것으로 나타났다. 넷째, P300 진폭은 선택반응시간-1에서 회복탄력성 중간집단이 상위 및 하위집단보다 높게 나타났다. 본 연구의 결과는 회복탄력성 수준에 따라 정보처리가 다르게 나타난다는 것을 보여준다.

• 한국멀티미디어학회논문지
• /
• 제19권6호
• /
• pp.1034-1042
• /
• 2016

The detection of P-waves and T-wave in the electrocardiogram signal analysis is an important issue. But the accuracy of the boundary detection algorithm is an insufficient level in the change of slow transition in the signal compared to the QRS complex. This study proposes an algorithm to detect P-wave and T-wave sequentially after determining local baseline using QRS complex. First, we detected the peak points based on local baseline and determined the onset and offset through the calculation of the area of the section. After modifying the baseline using detected waveform, we detected the other waveform in the same way and separated the P-wave and the T-wave based on the location. We used the PhysioNet QT database to evaluate the performances of the algorithm, and calculate the mean and the standard deviations. The experiment results show that standard deviations are under the tolerances accepted by expert physicians, and outperform the results obtained by the other algorithms.

• International Journal of Advanced Culture Technology
• /
• 제10권1호
• /
• pp.284-293
• /
• 2022

After extracting the calcium component from the KR slag and the converter slag using ammonium chloride solution, the extract was reacted with carbon dioxide to synthesize precipitated calcium carbonate (PCC). In order to understand the effect of ultrasonic waves on calcium extraction from slags and calcium carbonate synthesis, the efficiency of calcium carbonate synthesis according to the with or without of ultrasonic waves was analyzed. The synthetic efficiency of PCC was investigated according to various experimental conditions, and the synthesized calcium carbonate was analyzed using XRD and SEM. In both slags, the amount of PCC decreased as the reaction temperature increased. The pH at the end of the experiment capable of synthesizing the maximum PCC in the carbonation reaction was 7 (irradiated with ultrasound) and 8 (irradiated without ultrasound), respectively. Because the pH of the extraction filtrate is different when irradiated with or without ultrasound, the pH was adjusted to 9 by injecting an additive (10 M NaOH) before the carbonation experiment, and then the experiment was performed. When calcium was extracted from KR slag, the crystal phase appeared as calcite regardless of the pH at the end of the experiment. However, when calcium was extracted from the converter slag and the pH was set to 7 at the end of the experiment, the crystal phase of PCC appeared as a mixture of calcite and vaterite.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.1-4
• /
• 1995

The most of conventional ultrasonic transducers are constructed to generate either longitudinal or shear waves, but not both of them. We investigated the mechanism of dual mode transducers that generates both of the longitudinal and shear waves simultaneously with a single PZT element. The study has been aimed to find the desired cut by the examining the piezoelectric properties. Theory predicts that a mixed P/S mode transducer can be constructed using a related Z-cut of a PZT ceramics. We studied the performance of a PZT element as a function of its rotation angle so that its efficiency is optimized to excite the two waves equally strongly. The results are verified by checking the impedance variation of the element with Finite Element Methods, and chocking the wave form by pulse-echo test simulation. Based upon the theory a rotated Z-cut was prepared and a transducer were fabricated. Validity of the theory calculation is verified through the

• 한국전기전자재료학회논문지
• /
• 제15권10호
• /
• pp.914-920
• /
• 2002

This study investigates the mechanism of a dual mode probe that generates both of the longitudinal and shear waves simultaneously with a single FZT element. Most of conventional ultrasonic probes are constructed to generate either longitudinal or shear waves. After poling, PZT has the hexagonal 6mm crystal symmetry. All possible crystal cuts are checked to determine appropriate Euler transformation angles for efficient excitation of dual modes. For the selected cut, performance of the dual mode element is analyzed through numerical simulation and experiments. Results of the analysis determine the optimal crystal cut for simultaneous generation of P and S waves of equal strength.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.791-796
• /
• 2011

In order to understand long range wave propagation in railway tracks, it is required to identify how far vibrations can travel along a rail. To answer this question, the attenuation characteristics of the main propagating waves are required as a function of distance. In this work, it is identified which wave types predominantly propagate on various regions of the rail cross-section. Then decay rates of propagating waves in railway tracks are investigated for frequencies up to 80 kHz. A numerical method called the Wavenumber Finite Element (WFE) method is utilized to predict dispersion curves and decay rates for a rail on a continuous foundation. In order to validate the simulated results, measurements have been performed on a test track and an operational railway track. The measured results are compared with the output of the simulations and good agreements are found between them.

• 천문학회보
• /
• 제36권1호
• /
• pp.47.2-47.2
• /
• 2011

Gravitational waves from the pulsar glitch can be detected by next generation gravitational wave observatories. We investigate characteristics of the modes that can emit the gravitational waves excited by three different types of perturbations satisfying conservation of total rest mass and angular momentum. These perturbations mimic the pulsar glitch theories i.e., change of moment of inertia due to the star quakes or angular momentum transfer by vortex unpinning at crust-core interface. We carry out numerical hydrodynamic simulations using the pseudo-Newtonian method which makes weak field approximation for the dynamics, but taking all forms of energies into account to compute the Newtonian potential. Unlike other works, we found that the first and second strongest modes that give gravitational waves are $^2p_1$ and $H_1$ rather than$^2f$. We also found that vortex unpinning model excites the inertial mode in quadrupole moment quite effectively. The inertial mode may evolve into the non-axisymmetric r-mode.

• Smart Structures and Systems
• /
• 제13권4호
• /
• pp.587-614
• /
• 2014

In recent years the interest in online monitoring of lightweight structures with ultrasonic guided waves is steadily growing. Especially the aircraft industry is a driving force in the development of structural health monitoring (SHM) systems. In order to optimally design SHM systems powerful and efficient numerical simulation tools to predict the behaviour of ultrasonic elastic waves in thin-walled structures are required. It has been shown that in real industrial applications, such as airplane wings or fuselages, conventional linear and quadratic pure displacement finite elements commonly used to model ultrasonic elastic waves quickly reach their limits. The required mesh density, to obtain good quality solutions, results in enormous computational costs when solving the wave propagation problem in the time domain. To resolve this problem different possibilities are available. Analytical methods and higher order finite element method approaches (HO-FEM), like p-FEM, spectral elements, spectral analysis and isogeometric analysis, are among them. Although analytical approaches offer fast and accurate results, they are limited to rather simple geometries. On the other hand, the application of higher order finite element schemes is a computationally demanding task. The drawbacks of both methods can be circumvented if regions of complex geometry are modelled using a HO-FEM approach while the response of the remaining structure is computed utilizing an analytical approach. The objective of the paper is to present an efficient method to couple different HO-FEM schemes with an analytical description of an undisturbed region. Using this hybrid formulation the numerical effort can be drastically reduced. The functionality of the proposed scheme is demonstrated by studying the propagation of ultrasonic guided waves in plates, excited by a piezoelectric patch actuator. The actuator is modelled utilizing higher order coupled field finite elements, whereas the homogenous, isotropic plate is described analytically. The results of this "semi-analytical" approach highlight the opportunities to reduce the numerical effort if closed-form solutions are partially available.