• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.5
• /
• pp.372-382
• /
• 2002

As the most of dentofacial deformity patients indicated to orthognathic surgery have strong desire for esthetic improvement as well as functional improvement, ideal esthetic evaluation should be made at surgical prediction. Lateral cephalographs has been commonly used for surgical prediction, however, remarkable discrepancy between esthetic viewpoint by simple looking and analysis on lateral cephalographs often found on evaluation of sagittal position of the upper and lower jaws especially in cases of mandibular prognathism of Koreans. In these cases, we have been employed Esthetic NaP(ENaP)-line for corrective evaluation and ideal surgical prediction on lateral cephalographs, but the efficacy of ENaP-line has not been evaluated. This is a study on efficacy of ENaP-line for orthognathic surgery of Korean mandibular prognathism. 170 Korean patients who had been diagnosed as mandibular prognathism and planned for orthognathic surgery at Department of Oral and Maxillofacial Surgery, College of Dentistry, Yonsei University during last 10 years are studied. The obtained results are as followings; among 170 patients of mandibular prognathism, 132 patients(77.6%) had not discrepancy in evaluation of sagittal position of the maxilla between cephalometric and esthetic evaluation(they are classified as Group I), however, 38 patients(22.4%) had definite discrepancy(they are classified as Group II). ENaP-line was employed in all cephalometric analysis of Group II. The proportions of male and female were similar in both Groups. Sixteen vertical reference lines perpendicular to 16 horizontal reference lines were obtained as followings; Each of the representative degree of ${\angle}SN/AFH$, ${\angle}SN/CFH$ and ${\angle}AFH/CFH$ obtained at Group I was applied to SN plane, AFH plane and CFH plane of Group II each other, and so 16 horizontal reference lines could be obtained individually according to each of the applied degree to each plane. And then their reliability to coincide with ENaP-line of Group II was evaluated. A vertical reference line perpendicular to a horizontal line made by application of the representative degree of ${\angle}$AFH/CFH in Group I to AFH line in Group II had the most highest coincidence with ENaP-line of Group II, however, its agreement was 42% in male and 47% in female. From this results, the rest of them should be determined their corrective jaw position definitely depend on

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.3
• /
• pp.227-237
• /
• 2008

Arsenic has recently become of the most serious environmental concerns, and the worldwide regulation of arsenic fur drinking water has been reinforced. Arsenic contaminated groundwater and soil have been frequently revealed as well, and arsenic contamination and its treatment and measures have been domestically raised as one of the most important environmental issues. Arsenic behavior in geo-environment is principally affected by oxides and clay minerals, and particularly iron (oxy)hydroxides have been well known to be most effective in controlling arsenic. Among a number of iron (oxy)hydroxides, for this reason, 2-line ferrihydrite was selected in this study to investigate its effect on arsenic behavior. Adsorption of 2-line ferrihydrite was characterized and compared between As(III) and As(V) which are known to be the most ubiquitous species among arsenic forms in natural environment. Two-line ferrihydrite synthesized in the lab as the adsorbent of arsenic had $10\sim200$ nm for diameter, $247m^{2}/g$ for specific surface area, and 8.2 for pH of zero charge, and those representative properties of 2-line ferrihydrite appeared to be greatly suitable to be used as adsorbent of arsenic. The experimental results on equilibrium adsorption indicate that As(III) showed much stronger adsorption affinity onto 2-line ferrihydrite than As(V). In addition, the maximum adsorptions of As(III) and As(V) were observed at pH 7.0 and 2.0, respectively. In particular, the adsorption of As(III) did not show any difference between pH conditions, except for pH 12.2. On the contrary, the As(V) adsorption was remarkably decreased with increase in pH. The results obtained from the detailed experiments investigating pH effect on arsenic adsorption show that As(III) adsorption increased up to pH 8.0 and dramatically decreased above pH 9.2. In case of As(V), its adsorption steadily decreased with increase in pH. The reason the adsorption characteristics became totally different depending on arsenic species is attributed to the fact that chemical speciation of arsenic and surface charge of 2-line ferrihydrite are significantly affected by pH, and it is speculated that those composite phenomena cause the difference in adsorption between As(III) and As(V). From the view point of adsorption kinetics, adsorption of arsenic species onto 2-line ferrihydrite was investigated to be mostly completed within the duration of 2 hours. Among the kinetic models proposed so for, power function and elovich model were evaluated to be the most suitable ones which can simulate adsorption kinetics of two kinds of arsenic species onto 2-line ferrihydrite.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.2 no.2
• /
• pp.69-72
• /
• 1997

The pH of microbial culture medium was calculated from equations of equilibrium, meterial balances for ionic components and electro-neutrality theory. Ammonium ion consumption and Acetic acid production are found out to be the major contributors for the alteration of the pH as well as the buffer capacity of the medium. By measuring the buffer capacity on-line, levels of acetic acid were estimated by a software sensor using pH signal in a fermentation process of E.coli growing in a minimal medium. The measured values of acetic acid showed good correlation to those of estimated by the software sensor.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2147-2150
• /
• 2003

Recently, many technologies of the P.L.C (Power Line Carrier) are introduced for an efficient communication. P.L.C communication sends information in the carrier signals by conduction over the power wire. An arc detector is proposed in this paper for the effective transmission. The Power Line Carrier has an advantage in low cost because it uses existent power line. It can be easily applied anywhere that a power line socket is available. But the P.L.C. is very noisy, because many electronic devices in generate electronic noise in modulated signals. This problem should be considered carefully in the design of the arc detector system using P.L.C in railway. The proposed system can be applied for monitoring the arc detector system and the arc locator system in railway. Hence the system will be able to exchange the arc information to be T.C.M.S. (Train Control Management System), bogies and even between a station and trains in railway and use to suspicion fire in train.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.24 no.2
• /
• pp.249-260
• /
• 1994

The purpose of this study was to aid in the radiation therapy of head and neck cancer patients. For this study, radiation survival curves were generated for Bl6, MG-63 and YAC-l cell lines using semiautomated MTT assay and Dye Exclusion Assay. Irradiation of 2, 4, 6, 8, 10Gy were delivered at room temperature at a dose rate of 210.2cGy/min using / sup 60/Co γ-ray Irradiator ALOORAOO 8. The viable cells were determined for each radiation dose and compared to control values. The obtained results were as follows: 1. There was significantly different absorbance at 10Gy on B16 cell line in MTT assay(P<0.05). 2. There was significantly different absorbance at 4, 6, 8, 10Gy on MG-63 cell line in MTT assay(P<0.05). 3. YAC-l cell line was more sensitive than B16 or MG-63 cell line to all doses of radiation(P<0.05). 4. There was significantly different absorbance among all tumor cell lines except between B16 and MG-63 cell line at ZGy in MTT assay(P<0.05). 5. Good correlation was obtained between MTT assay and DEA(P<0.05). The efficient of correlation of B16, MG-63 and YAC-l cell line was 0.845, 0.824 and 0.906, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.9
• /
• pp.1331-1337
• /
• 2016

The aim of this study was to compare the growth performance, fiber characteristics of the pectoralis major muscle, and meat quality characteristics in the heavy weight (HW) and random bred control (RBC) quail lines and genders. The HW male exhibited more than two times greater body (245.7 vs 96.1 g, p<0.05) and pectoralis major muscle (PMW; 37.1 vs 11.1 g, p<0.05) weights compared to the RBC female. This growth performance in the HW line was associated with a greater muscle fiber area (1,502 vs $663.0{\mu}m^2$, p<0.001) compared to the RBC line. Greater muscle mass of the HW male was accompanied by a higher percentage of type IIB fiber compared to the HW female (64.0% vs 51.0%, p<0.05). However, muscle fiber hyperplasia (increase in fiber number) has had a somewhat limited effect on PMW between the two lines. On the other hand, the HW line harboring a higher proportion of type IIB fiber showed rapid pH decline at the early postmortem period (6.23 vs 6.41, p<0.05) and lighter meat surface (53.5 vs 47.3, p<0.05) compared to the RBC line harboring a lower proportion of type IIB fiber. There were no significant differences observed in the measurement of water-holding capacity including drip loss (2.74% vs 3.07%, p>0.05) and cooking loss (21.9% vs 20.4%, p>0.05) between the HW and RBC lines. Therefore, the HW quail line developed by selection from the RBC quail, was slightly different in the meat quality characteristics compared to the RBC line, and a marked difference was found in growth performance between the two quail lines.

• Journal of Technologic Dentistry
• /
• v.12 no.1
• /
• pp.95-102
• /
• 1990

The distances from the center line between maxillary right and left central incisors(the dental midline) to the various anatomical landmarks were measured. Fifty five students(thirth four males and twenty one females) who have at least natural teeth including maxillary and mandibular incisors and bicuspids were examined. 1. There was statistically significant difference between the dental midline and the center line of maxillary labial frenum(p<0.05). 2. There was no statistically significant difference between the dental midline and the point of incisive papilla, philtrum line, the center line between two mandibular central incisors, and the median palatine suture line(p>0.05). 3. There was no statistically significant sexual difference among data. 4. The philtrum line showed the highest value of correspondence to the center line between two maxillary central incisors followed by the center point of incisive papilla, the center line of two mandibular central incisors, median plaltine suture line and the center line of maxillary labial frenum at the decreasing rate.

• Food Science of Animal Resources
• /
• v.30 no.5
• /
• pp.867-871
• /
• 2010

Objective of this study was to develop a Korean Berkshire line produced using organized management techniques. A total of 448 pigs divided into five line groups were slaughtered and analyzed for their meat quality. $pH_{45}$ values were significantly higher in lines 1~4 (pH 6.08). However, $pH_{24}$ values were lower in line 1 (pH 5.69) and line 3 (pH 5.65) (p<0.05) than in the other lines. Moisture contents were significantly higher in line 5, and the intramuscular fat contents (3.07%) were significantly higher in the other four lines. Water holding capacity (WHC) was higher for line 3 (58.36%) while Warner-Bratzler shear force (WBS) values were significantly higher for line 4 (2.84 kg/$0.5inch^2$) than in the other lines (p<0.05). For meat color properties, L values (CIE L) were 51.59 for line 5, and this value was higher than the other lines. There were no significant differences in $a^*$ values and $b^*$ values among the five lines (p>0.05). Therefore, line 5 was selected as the growth type, whereas line 4 was selected as the Korean Berkshire line that produced pork significantly higher in pH and significantly lower in meat color (lightness), drip loss, and WBS.

• Korean Journal Plant Pathology
• /
• v.11 no.4
• /
• pp.353-360
• /
• 1995

Tests were performed on 232 bacterial strains (71 strains of Pseudomonas tolaasii and 161 white line reacting organisms, WLRO) isolated from cultivated mushrooms. As results, P. tolaasii was divided into 5 groups on the basis of the phenotypical characteristics for the strains, and group 3 was the major one including 48 (62%) out of the total 71 strains. WLRO were classified into 23 groups, and group 10 was the major group (65 strains, 30% of the total WLRO tested). A white line was well formed at 22$^{\circ}C$ and at 4 mm distance between P. tolaasii and WLRO colonies in their dual culture on Pseudomonas agar F medium within 36-hr incubation, but not formed at $25^{\circ}C$ even for 72-hr incubation. The morphological, cultural and biological properties of P. tolaasii group 3, and the main group of WLRO, group 10, were different only in the light of pathogenicity. Also group 2 of P. tolaasii had the characteristics similar to group 24 of WLRO which was pathogenic to cultivated mushrooms, suggesting the P. tollaasiii and WLRO strains may be the same species although their white line forming ability and pathogenicity were more or less different from one another. Subculture of the strains in P. tolaasii group 1 induced the variation of their pathogenicity, white line forming ability and utilization of sodium benzoate and sodium tartrate, and thus it can be inferred that they were converted to strains having the characteristics of group 3 or WLRO groups.

• Proceedings of the KSAR Conference
• /
• 2003.06a
• /
• pp.73-73
• /
• 2003

본 연구는 돼지 체세포의 clonal cell lines을 효율적으로 확립할 수 있는 배양방법을 제시하기 위하여 실시하였다. 50일령의 돼지태아로부터 섬유아세포를 회수하여 2회 계대배양 후 단일 세포를 96-well plate와 4-well dish에서 배양하여 배양액내의 FBS농도(10, 30, 50%), 첨가제(catalase, $\beta$-mercaptoethanol; BME), 세포의 크기(<16, 16~20, 20<) 및 형태(smooth, rough)에 따른 cell line 확립 효율을 검토하였다. FBS 농도에 따른 clonal line 확립 효율과 PD를 검토한 결과, 효율에 있어서 30% FBS 처리구(5.1%)가 10%(0.3%) 및 50%처리구(2.1%)보다 비교적 높게 나타났으나 유의적 차이는 없었으며, PD의 경우는 10, 30, 50%처리구에서 각각 36.7, 29.4, 26.3 시간으로 FBS 농도가 증가할수록 PD 시간이 유의적으로 짧아졌다(p<0.05). 배양액 첨가제에 있어서 BME 가시 무처리구나 catalase 첨가시보다 유의적으로 높은 효율을 보였으며(11.4%, 3.2%, 3.2%; p<0.05), PD 시간은 짧게 나타났다(23.6, 25.5, 28.1; p<0.05). 그러나 catalase는 cell line 확립 효율에 영향을 미치지 않는 것으로 나타났다. 세포의 크기에 따른 cell line 확립효율은 5.2~8.2%로 크기에 따른 차이는 보이지 않았으며, PD 또한 23.7~27.9 시간으로 세포 크기에 따른 차이는 없었다. 세포의 형태에 따른 세포의 부착율은 smooth(55.8%)구가 rough(73.0%)구보다 유의적으로 낮게 나타났으나(p<0.05), clonal line 확립 효율(7.7%n vs. 6.6%) 및 PD(23.5h vs. 24.0h)에서는 차이가 없었다. 본 연구의 결과, 세포의 형태에 따른 cell line 확립 효율은 큰 차이가 없었으나, 세포 배양액내에 30% FBS와 BME의 첨가로 clonal cell line 확립 효율을 향상시킬 수 있음을 확인할 수 있었다. 또한 cell line 확립 효율이 높아질수록 PD 시간이 짧아지는 경향을 볼 수 있었다.