• 한국환경과학회지
• /
• 제22권11호
• /
• pp.1457-1464
• /
• 2013

We investigated the optimal conditions for keratinase production by feather-degrading Pseudomonas geniculata H10 using one variable at a time (OVT) method. The optimal medium composition and cultural condition for keratinase production were determined to be glucose 0.15% (w/v), beef extract 0.08% (w/v), $KH_2PO_4$ 0.12% (w/v), $K_2HPO_4$ 0.02% (w/v), NaCl 0.07% (w/v), $MgSO_4{\cdot}7H_2O$ 0.03%, $MgCl_2{\cdot}6H_2O$ 0.04% along with initial pH 10 at 200 rpm and $25^{\circ}C$, respectively. The production yield of keratinase was 31.6 U/ml in an optimal condition, showing 4.6-fold higher than that in basal medium. The strain H10 also showed plant growth promoting activities. This strain had ammonification activity and produced indoleacetic acid (IAA), siderophore and a variety of hydrolytic enzymes such as protease, lipase and chitinase. Therefore, this study showed that P. geniculata H10 could be not only used to upgrade the nutritional value of feather wastes but also useful in situ biodegradation of feather wastes. Moreover, it is also a potential candidate for the development of biofertilizing agent applicable to crop plant soil.

• 대한소아치과학회지
• /
• 제25권4호
• /
• pp.731-748
• /
• 1998

The purpose of this study was to test the hypothesis that the more thorough cure of lightactivated composite resin could be obtained if a new way of delivering the light source deep through the resin body is developed when compared to the conventional bulk cure or incremental cure. Using cylindrical resin blocks and natural teeth, various curing conditions were tested for their effects on the degree of microleakage and microhardness. Data were analyzed statistically using One-Way ANOVA and Scheff's Multiple Range test. The results of the present study were as follows: 1. The increment of reduction in microhardness with depth was shown to be higher in group I and II than in group II and V. 2. At the level of lower inner surface and the bottom surface, significantly lower microhardness values were obtained in group I and II when compared to group III, IV and V. Group IV showed the lowest value among three groups(III, IV, V) representing the only statistically significant difference from group V(p<05). 3. Differences between groups in the degree of microleakage detected were shown to be statistically significant (p<05) with the exception of group IV and V at both occlusal and gingival margins. 4. Based upon the above-mentioned results, commonly cited recommendation of incremental curing is strongly supported and the light-transmitting wedge insertion method can be considered as a effective and feasible clinical procedure for the better curing of composite resin. However, more studies under a variety of conditions should be completed before this method is applied actually to the clinical setting.

• 대한치과기공학회지
• /
• 제11권1호
• /
• pp.103-109
• /
• 1989

Bond strength between alloy and ceramic plays an important role in deciding the quaring the processing of metalceramic restorations. Now the author had an experiment on the measurement of bond strength differences accoding to the contents of recast alloy used during the processing of metal-ceramic restorations. In the experiment, Anusavice's Planar Interface Shear Bond Test was employed to determine the bond strength. Total 25 specimens were divided as 5 groups, that is, 5 specimens in a group respections : Group I (new alloy 100%) Group II (new 75%$\cdot$recast 25%), Group III (new 50%$\cdot$recast 50%), Group IV (new 25%$\cdot$recast 75%), Group V(recast 100%). All specimens examined micropically and respective strength values of the group specimens were checked simultaneously. The results were as follows, 1. In the analtsis of variance the result showed the significant differences of 1%(P<0.01) among the each group classifid according to the recast contents. 2. When the interfaces of specimens were examined with an electron microscope, the air bubble were evenly occurred in all the specimens, and the occurrence frequencies and the sizes of air bubble were different between Group I and Group III, especially marked different Group I and Croup V. 3. In respective verification of each group through T-test, between Group I and Group II, between Group I and Group III did not show significant differences. 4. There was significant difference between Group I and Group IV, between Group I and Group V as 1%(P<0.01). 5. In the Shear Bond Test of all the groups, Croup V showed the lowest value. Explanatoion of Figures Fig 1. Main fracture type of metal-porcelain interlace showed in group I, II, III from shear Bond Test resets. Fig 2. Main fracture type of metal-porcelain interface showed In group Ⅳ, Ⅴ form shear Bond Test resets. Air bubble and their size appeared around interface of metal-porcelain. Fig 3. Group I, Fig 4. Group II Fig 5. Group III, Fig 6. Group IV, Fig 7. Group V.

• 한국세라믹학회지
• /
• 제39권4호
• /
• pp.377-385
• /
• 2002

Metal-Ferroelectric-Insulator-Semiconductor(MFIS) 구조의 적용하기 위해 R. F. 마그네트론 스퍼터를 이용하여 p-type Si(111) 기판 위에 $ZrO_2$와 $SrBi_2Ta_2O_9$ 박막을 증착하였다. SBT 박막은 $ZrO_2$ 완충층을 삽입함으로써 MFIS 구조의 전기적인 특성이 향상되었다. $ZrO_2$ 박막의 두께를 고정하고 SBT 박막의 두께를 160nm에서 220nm으로 변화시키면서 윈도우 메모리를 3-9V의 범위에서 측정하였다. Pt/SBT(160nm)/$ZrO_2$(20nm)/Si의 조건에서 최대 2.2V 메모리 윈도우 값을 얻을 수 있었으며 이 메모리 윈도우 값은 실제 적용되는 저전압 NDRO-FRAM 구동에 충분한 값이다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권5호
• /
• pp.680-683
• /
• 2001

The apparent metabolisable energy (AME) and N-corrected ME (AMEn) of deoiled rice bran (DORB) were determined with adult quails at 6 and 10- week of age. The DORB obtained from two types of extraction process, Batch (DORB-B) and the Continuous (DORB-C), was each included in a practical type of the reference diet at 20 or 40% level. The analysed crude protein, ether extract, total ash, calcium, phosphorus, glucose and starch content of DORB-B and DORB-C were found at 19.0, 0.79, 17.05, 0.11, 1.92, 2.3, 11.22, and 15.02, 1.56, 13.0, 0.40, 2.76, 2.16, 19.0, respectively. The level of inclusion of DORB in diet appeared to exert a significant effect on the AME and AMEn values. When bioassayed at 20% inclusion level the DORB was found to have a significantly (p<0.01) lower value than that obtained at 40% inclusion level. However, no significant effect of age of quails on the AME values of DORB was evident. The ME bioassays with quails gave significantly (p<0.01) higher AME values for DORB-C than DORB-B thereby indicating that the continuous system of solvent extraction of rice bran is superior to the batch system from this point of view. The AME value of DORB predicted from its chemical composition also revealed that the DORB-C contained approximately 15% more energy than that in DORB-B.

• 대한정형도수물리치료학회지
• /
• 제11권2호
• /
• pp.13-18
• /
• 2005

The ulnar nerve extends down the arm, across the elbow, and into the hand. It provides sensation to the little and ring fingers and activates many of the small muscles in the hand. The determination of peripheral nerve conduction velocity is an important part of ulnar nerve evaluation. The electrodiagnostic value as neurophysiologic investigative procedure has been known for many years but normal value of digital nerve was not reported in Korea. The purpose of this investigation was to measure the digital nerve conduction velocity of ulnar nerve for obtain clinically useful reference value and compare difference in each fingers and then compare with the other countries. 71 normal Korean volunteers (age, 19-65 years; 142 hands) examined who has no history of peripheral neuropathy, diabetic mellitus, chronic renal failure, endocrine disorders, anti-cancer medicine, anti-tubercle medicine, alcoholism, trauma, radiculopathy. Nicolet Viking II (EMG machine) was use for detected conduction velocity and amplitude of digital nerves in ulnar nerve. Data analysis was performed using SPSS. Descriptive analysis was used for obtain mean and standard deviation and independent t-test was used to compare with ring and little finger. Conduction velocity of the right ring finger was 57.44m/sec and little finger was 55.32msec. The left ring finger was 55.55msec and little finger was 54.11msec. Amplitude of the right ring finger was $30.28{\mu}V$ and little finger was $48.36{\mu}V$. The left ring finger was $30.67{\mu}V$ and little finger was $52.76{\mu}V$. There were significantly difference between ring and little in amplitude (p<.05) but there were no statistically difference between conduction velocity of ring and little finger (p>.05). The amplitude of little finger are greater than ring finger. The present results revealed that electodiagnosis can easily perform in little finger for digital nerve of ulnar nerve study.

• 대한방사선치료학회지
• /
• 제32권
• /
• pp.17-29
• /
• 2020

목 적: 전립선 방사선 치료 시 회피 영역을 지정한 혼합 에너지(Mixed Energy Partial Arc, MEPA) VMAT 치료 계획의 선량평가를 통해 임상 적용 가능성을 평가한다. 대상 및 방법: 전립선암 환자 9명을 대상으로 치료 장비 True Beam Stx(Varian Medical System, USA), 치료 계획시스템(Eclipse, Varian Medical System, USA)을 이용하여 치료 계획용적(PTV)에 2.5Gy, 30회로 총 선량 70Gy를 처방하여, 회피 영역을 지정한 혼합 에너지 치료 계획과 6MV 1 ARC, 6MV, 10MV 그리고 15MV 2 ARC 치료 계획과 비교 분석하였다. 혼합 에너지 치료 계획은 첫 번째 ARC에서 갠트리 각도 180°~230°, 310°~50°은 6MV로 지정하고 230°~310°, 50°~130°는 회피 영역으로 지정하였고 두 번째 ARC에서 갠트리 각도 130°~50°, 310°~230°는 에너지 15MV로 설정 후 50°~310°는 회피 영역으로 지정하였다. 2가지 치료 계획을 각각 최적화 및 선량 계산 후 Sum plan을 생성하였다. 각각의 치료 계획은 선량체적히스토그램(Dose Volume Histogram, DVH)을 이용하여 PTV의 최대선량, 평균선량, D2%, 처방 선량 지수(Conformity Index, CI), 선량 균질 지수(Homogeneity Index, HI) 및 손상위험장기(Organ at Risk, OAR)의 선량을 분석하였다. 또한 monitor unit(MU)와 치료시간(beam on time)을 분석하였다. 결 과: MEPA 치료 계획은 PTV에서 최대선량, 평균선량, D2%값은 75.86±0.47, 71.95±0.51, 73.92±0.45로 6MV 1 ARC 계획보다 낮은 값(전체 p<0.0005)을 보였고 6MV, 10MV, 15MV 2 ARC 치료 계획과의 비교에서 최대선량은 평균 차이 각각 0.24%, 0.39%, 0.60%(p<0.450, 0.321, 0.139), D2% 값 0.42%, 0.49%, 0.59%(p<0.073, 0.087, 0.033)로 높게 분석되었다. 평균선량은 10MV 2 ARC 치료 계획보다 0.09%(p<0.615) 낮았지만 6MV 2 ARC와 15MV 2 ARC와의 비교에서 각각 0.27%, 0.12%(p<0.184, 0.521) 높게 나타났다. HI는 0.064±0.006로 가장 낮은 값으로 분석(p<0.005) 되어 가장 좋은 균질도를 보이며 CI는 MEPA에서 1.12±0.038, 6MV 1 ARC, 6MV, 10MV, 15MV 2 ARC 각각 1.12±0.036, 1.11±0.024, 1.11±0.030, 1.12±0.027로 모든 치료 계획에서 유사한 값으로 분석되었다. 직장 선량은 MEPA가 모든 선량 분석 파라미터에서 낮은 값으로 분석되었다. 특히 V70Gy, V50Gy, V30Gy, V20Gy은 3.40, 16.79, 37.86, 48.09으로 직장에 조사되는 저 선량 영역의 체적을 의미 있는 만큼 줄일 수 있었다. 방광선량은 V30Gy, V20Gy이 다른 치료 계획에 비해 낮은 값을 보였다. 하지만 양측 대퇴골두 비교에서 MEPA는 평균선량 9.69±2.93, 9.88±2.5로 비교된 치료 계획에 비해 2.8Gy~3.28Gy 높은 값을 보였다. 평균 MU값은 MEPA가 6MV 1 ARC보다 19.53%, 10MV 2 ARC에 비해 5.7% 감소하였다. 결 론: 저에너지 X선(6MV)과 고에너지 X선(15MV)을 사용 한 MEPA는 각각 에너지의 장점을 취해 비교한 치료 계획보다 개선된 HI와 동등한 CI값으로 분석되어 만족할 만한 PTV coverage를 보였으며 방광과 직장을 보호하는데 효과적이라고 생각된다.

• Nuclear Engineering and Technology
• /
• 제53권12호
• /
• pp.4106-4113
• /
• 2021

Rare earth doped barium tellurite glasses were synthesised and explored for their radiation shielding applications. All the samples showed good thermal stability with values varying between 101 ℃ and 135 ℃ based on dopants. Structural properties showed the dominance of matrix elements compared to rare earth dopants in forming the bridging and non-bridging atoms in the network. Bandgap values varied between 3.30 and 4.05 eV which was found to be monotonic with respective rare earth dopants indicating their modification effect in the network. Various radiation shielding parameters like linear attenuation coefficient, mean free path and half value layer were calculated and each showed the effect of doping. For all samples, LAC values decreased with increase in energy and is attributed to photoelectric mechanism. Thulium doped glasses showed the highest value of 1.18 cm^-1 at 0.245 MeV for 2 mol.% doping, which decreased in the order of erbium, holmium and the base barium tellurite glass, while half value layer and mean free paths showed an opposite trend with least value for 2 mol.% thulium indicating that thulium doped samples are better attenuators compared to undoped and other rare earth doped samples. Studies indicate an increased level of thulium doping in barium tellurite glasses can lead to efficient shielding materials for high energy radiation.

• 한국식품영양학회지
• /
• 제10권4호
• /
• pp.497-502
• /
• 1997

대두 및 두유박의 주요 다당류인 대두 arabinogalactan(SAG)을 이용하여 갈락토올리고당을 생산하고자 SAG 가수분해효소인 $\beta$-1, 4-galactanase를 이용하여 대두 갈락토올리고당(SOS)의 생산조건 및 그 특성을 연구 검토하였다. SOS는 SAG 1%(w/v), pH 8.0, 5$0^{\circ}C$인 조거에서 $\beta$-1, 4-galactanase를 20unit/g SAG를 첨가하여 24-40시간 반응하여 생산하였다. 생산된 SOS 용액(75%)은 11,000cp의 점도를 나타내어 같은 농도의 설탕용액 140cp의 값에 비해 80배 큰 값을 나타내었다. 점도의 온도의존성은 5$0^{\circ}C$ 이하에서는 온도의존 함수(B) 값이 11,037 cp.K로 설탕용액의 2,760보다 약 4.6배 크지만 5$0^{\circ}C$ 이상에서는 3,400으로 큰 차이를 보이지 않았다. 또한 올리고당의 농도가 50 Brix 이하에서는 설탕용액의 점도 20-30 cp와 유사한 20-40cp로 차이를 보이지 않지만 농도가 증가함에 따라 차이가 커져 Brix 70에서는 1,280cp로 설탕용액의 90cp보다 15배 높은 값을 나타내었다. 생산된 SOS는 pH 및 온도에 대해 매우 안정하여 pH 3,14$0^{\circ}C$인 조건하에서도 분해로 인하여 생산되는 galactose가 없었다.

• 산업기술연구
• /
• 제16권
• /
• pp.5-11
• /
• 1996

While the enhanced biological phosphorus removal(EBPR), in anaerobic/aerobic condition, was known to remove phosphorus by means of metabolism of poly-P microorganisms, the phosphorus removed could be released in the form of ortho-P in the aerobic fixed biofilm reactor. This study was initiated to investigate the cause of ortho-P release in the aerobic fixed biofilm reactor. The resutls indicated that the phosphorus release was caused by autooxidation. The synthesis and release of phosphrous were related to the ORP and the boundary value for the phase change was about 170mV. In the synthesis phase, the phosphorus removal rate per COD removed was $0.023mgP_{syn}/mgCOD_{rem}$. The phosprous contents of the microorganism were 4.3 ~ 6.0% on a dry weight basis.