• Journal of Aquaculture
• /
• v.13 no.2
• /
• pp.169-174
• /
• 2000

Reproductive cycle of U. unicinctus was studied from September 1998 to August 1999, using gonadosomatic index (CSI) as an indicator. In November, the CSI values were maximum for male (6.2) and female (7.0), respectively; the values were lowest for them (1.0 and 0.5) during the successive february. Subsequently, they rapidly increased and attained peak by March-April. The values decreased again in both sexes and remained unchanged until August. The index increased in October to attain the peak by November. The CSI values clearly indicated that there are two spawning events in a year, namely the first one during April-May and the second one in December. Reproductive cycle was classified into the following successive stages: in female, multipication (January~February, June ~Setember), maturation (March~April, November), spent (May and December), degeneration and resting (June and January), and in male, multiplication January ~ february, June ~September), maturation (March~April, October~November), spent (May and December) and degeneration and resting (January and June). Histological observations revealed that oocytes in the ovary matured simultaneously in November and March. At the same time, the envelopes of matured testis became thinner than those in the early stage.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.348-351
• /
• 2003

산소 과전압이 낮은 $MnO_2$를 촉매로 사용하여 반도체 산화물계의 산소선택성 전극을 제조하고 산화물 coating층의 미세구조와 전기화학적 특성을 분석하였다. Ti 기판에 열분해 법을 이용하여 $MnO_2$ 피막을 형성하였고, 또한 PVDF : $MnO_2$의 함량비를 1 : 1에서 1 : 40까지 정량적으로 변화시키고 DMF의 함량을 각각의 고정된 PVDF : $MnO_2$의 함량비에서 변화시켜 Pb전극에 1.5 mm/sec의 속도로 5회 dipping하여 $MnO_2$ 피막층을 형성 하였다. $450^{\circ}C$에서 1시간 열분해하여 약 $1\;{\mu}m$의 $MnO_2$ 피막층이 형성되었으나 Ti 기판과의 접착력이 약하여 피막자체에 대한 전기화학적 특성을 관찰할 수 없었다. PVDF : DMF = 4 : 96인 경우 pb 전극의 피막층이 얇기 때문에 박리현상이 일어났으며 이는 산화물 용제의 낮은 점도 때문인 것으로 판단된다. 또한 PVDF : DMF = 10 : 90의 경우는 5회 dipping 하여 약 $150\;{\mu}m$의 피막층을 형성하였다. PVDF : $MnO_2$의 함량비가 1:1에서 1:6 까지는 DMF의 함량에 무관하게 전극 특성이 나타나지 않았지만 $MnO_2$의 양이 상대적으로 증가하면 cycle이 증가하더라도 거의 일정한 전류 값을 갖고 $MnO_2$와 PVDF의 비가 20:1 이상의 조성에서는 균일한 CV 특성을 나타냈다. 이는 $MnO_2$가 효과적으로 촉매 작용을 한 것으로 판단되며 anodic polarization에 의한 산소 발생 과전압도 약 1.4V 정도로 감소되었다.동등한 MSIL 코드를 생성하도록 시스템을 컴파일러 기법을 이용하여 모듈별로 구성하였다.적용하였다.n rate compared with conventional face recognition algorithms. 아니라 실내에서도 발생하고 있었다. 정량한 8개 화합물 각각과 총 휘발성 유기화합물의 스피어만 상관계수는 벤젠을 제외하고는 모두 유의하였다. 이중 톨루엔과 크실렌은 총 휘발성 유기화합물과 좋은 상관성 (톨루엔 0.76, 크실렌, 0.87)을 나타내었다. 이 연구는 톨루엔과 크실렌이 총 휘발성 유기화합물의 좋은 지표를 사용될 있고, 톨루엔, 에틸벤젠, 크실렌 등 많은 휘발성 유기화합물의 발생원은 실외뿐 아니라 실내에도 있음을 나타내고 있다.>10)의 $[^{18}F]F_2$를 얻었다. 결론: $^{18}O(p,n)^{18}F$ 핵반응을 이용하여 친전자성 방사성동위원소 $[^{18}F]F_2$를 생산하였다. 표적 챔버는 알루미늄으로 제작하였으며 본 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이용될 수 있을 것이다.었으나 움직임 보정 후 영상을 이용하여 비교한 경우, 결합능 변화가 선조체 영역에서 국한되어 나타나며 그 유의성이 움직임 보정 전에 비하여 낮음을 알 수 있었다. 결론: 뇌활성화 과제 수행시에 동반되는 피험자의 머리 움직임에 의하여 도파민 유리가 과대평가되었으며 이는 이 연구에서 제안한 영상정합을 이용한 움직임 보정기법에 의해서 개선되었다. 답이 없는 문제, 문제 만들기, 일반화가 가능한 문제 등으로 보고, 수학적 창의성 중 특히 확산적 사고에 초점을 맞추어 개방형 문제가 확산적 사고의 요소인 유창성, 독창성, 유연성 등에 각각 어떤 영향을 미치는지 20주의 프로그램을 개발, 진행하여 그 효과를 검증하고자

• Journal of Chest Surgery
• /
• v.31 no.9
• /
• pp.873-876
• /
• 1998

Background: High-dose aprotinin has been reported to enhance the anticoagulant effects of heparin during cardiopulmonary bypass ; hence, som authors have advocated reducing the dose of heparin in patients treated with aprotinin. Material and Method: The ACT was measured before, during and after cardiopulmonary bypass, with Hemochron 801 system using two activators of celite(C-ACT) and kaolin(K- ACT) as surface activator. From June, 1996 to February, 1997, 22 adult patients who were scheduled for elective operation were enrolled in this study. Result: The ACT without heparin did not differ between C-ACT and K-ACT. At 30 minutes after anticoagulation with heparin and cardiopulmonary bypass, the average C-ACT was 928${\pm}$400 s; K-ACT was 572${\pm}$159s(p<0.05). After administration of protamine, C-ACT was 137${\pm}$26 s; K-ACT was 139${\pm}$28s, which were not statistically significant. Conclusion: Our results showed that the significant increase in the ACT during heparin- induced anticoagulation in the presence of aprotinin was due to the use of celite as surface activator, rather than due to enhanced anticoagulation of heparin by aprotinin. We conclude that the ACT measured with kaolin provides better monitoring of cardiac surgical patients treated with high dose aprotinin than does the ACT measured with celite. The patients treated with aprotinin should receive the usual doses of heparin.

• Journal of the Korean Society of Radiology
• /
• v.4 no.1
• /
• pp.5-9
• /
• 2010

In recent, a digital x-ray detector attracted worldwide attention and there are many studies to commercialize. There are two methods in digital x-ray detector. This method is an Indirect method and Direct method. This study is to see the differences between the digital x-ray detector based on a-Se used in the existing indirect conversion method and an x-ray conversion material that has better SNR(Signal-to-noise ratio) and property than the a-Se. To solve the problem that is difficult to make a large area film using Screen-Print method, we used a Screen-Print method. In this study, we used a polyclystal $HgI_2$ as x-ray conversion material and a sample thickness is $150{\mu}m$ and an area is $3cm{\times}3cm$. ITO(Indium-Tin-Oxide) electrode was used as top electrode using a Magnetron Sputtering System and each area is $3cm{\times}3cm$, $2cm{\times}2cm$ and $1cm{\times}1cm$ and then we evaluated darkcurrent, sensitivity and SNR of the $HgI_2$ film are measured, then we evaluated the electrical properties. And we used a current integration mode when I-V test. This experiment shows that the sensitivity increases in accordance with the area of the electrode but the SNR is decreased because of the high darkcurrent. Through fabricating of various thicknesses and optimal electrodes, we will optimize SNR in the future work.

• Parasites, Hosts and Diseases
• /
• v.36 no.1
• /
• pp.15-22
• /
• 1998

An in uitro culture technique was established for harvesting Strongwloides venezuelensis free-living infective larvae using a nutrient broth medium as a substitute for rat-feces in polyvinyl culture bags ($10{\;}{\times}{\;}12{\;}cm$). The egg hatch rate V) in sterile saline at different incubation temperatures (X) was expressed as the quadratic function, Y = $-0.192X^2$ + 8.673x - 19.550 (r = 0.901). The highest (100%) egghatch rate was observed at $25^{\circ}C$. A significant difference (p<0.05) in development rate W) of free-living infective larvae was observed between different concentrations of nutrient broth (X) which was highest (20.6%1 in 0.12% nutrient broth concentrations, incubated at $20^{\circ}C$ for 5 days [Y = $-864.032X^2$ + 245.995X- 0.560 (r = 0.875)]. Yields (Y) of infective larvae were observed relatively high when the culture medium was incubated at higher temperatures (X) which peaked at $25^{\circ}C$ (20.0%) than at lower temperatures. $15^{\circ}C$M (10.9%) and $20^{\circ}C$ (18.1%) [Y = $-0.189X^2$ + 8.387x- 72.795 (r = 0.981)]. The period W) required for the development of infective larvae decreased with higher incubation temperatures (X) [Y = $0.035X^2$ - 2.025X + 32.375 (r = 0.995)] The highest yield (19.2%) of infective larvae was obtained from culture bag inoculated with 15.000 eggs than with below and over 15,000 eggs in 0.12% nutrient broth and incubated at $25^{\circ}C$ for 4 days. The newly adapted culture method (from egg to third-stage larva) may be useful as a bio-bar/bioassay system for screening new chemical products, anthelmintics and pesticides, as well as for parasito immunological studies with Strongwloides species.

• Journal of Food Hygiene and Safety
• /
• v.32 no.2
• /
• pp.154-162
• /
• 2017

The purpose of this study was to investigate the microbial reduction effect of chlorine dioxide and sodium hypochlorite in Korean chive. Korean chive inoculated with foodborne pathogens at the level of approximately 7~8 log CFU/g was treated with various concentration of chlorine dioxide (3, 4, 10, 25 and 100 ppm and sodium hypochlorite (100, 150 and 200 ppm) for 5, 10, 30 and 60 minutes. The treatment of 150 ppm sodium hypochlorite and 50 ppm chlorine dioxide for 30 min reduced the number of total bacteria in Korean chive up to 2.0 log CFU/g. Reduction of microbial levels was observed for all concentrations of sanitizers but their effectiveness did not correspond to their concentration. Due to the quality degradation, 50 ppm chlorine dioxide was not appropriate for Korean chive. Most effective reduction of microbial levels was observed when Korean chive were treated with 9 times more sanitizer in volume. For field application, the treatment of 150 ppm sodium hypochlorite showed 2.7 and 4.0 log CFU/g reductions for numbers of total bacteria and coliforms, respectively. Therefore, washing with sodium hypochlorite of a ratio of 1:9 (Korean chive : 150 ppm sodium hypochlorite (w/v)) for 30 minutes can reduce the number of foodborne pathogen in Korean chive.

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.333-339
• /
• 2009

This study was done to determine if there is any difference in microleakage between experimental composite resins, in which various proportions of three component photoinitiators (Camphoroquinone, OPPI, Amine) were included. Four kinds of experimental composite resin were made by mixing 3.2% silanated barium glass (78 wt.%, average size; 1 ${\mu}m$) with each monomer system including variously proportioned photoinitiator systems used for photoinitiating BisGMA/BisEMA/TEGDMA monomer blend (37.5:37.5:25 wt.%). The weight percentage of each component were as follows (in sequence Camphoroquinone, OPPI, Amine): Group A - 0.5%, 0%, 1% / Group B - 2%, 0.2%, 2% / Group C - 0.2%, 1%, 0.2% / Group D - 1%, 1%, 2%. Each composite resin was used as a filling material for round class V cavities (diameter: 2/3 of mesiodistal width; depth: 1.5 mm) made on extracted human premolars and they were polymerized using curing light unit (XL 2500, 3M ESPE) for 40 s with an intensity of 600 mW/$cm^2$. Teeth were thermocycled fivehundred times between $50^{\circ}C$and $550^{\circ}C$for 30s at each temperature. Electrical conductivity (${\mu}A$) was recorded two times (just after thermocycling and after three-month storage in saline solution) by electrochemical method. Microleakage scores of each group according to evaluation time were as follows [Group: at first record / at second record; unit (${\mu}A$)]: A: 3.80 (0.69) / 13.22 (4.48), B: 3.42 (1.33) / 18.84 (5.53), C: 4.18 (2.55) / 28.08 (7.75), D: 4.12 (1.86) / 7.41 (3.41). Just after thermocycling, there was no difference in microleakage between groups, however, group C showed the largest score after three-month storage. Although there seems to be no difference in microleakage between groups just after thermocycling, composite resin with highly concentrated initiation system or classical design (Camphoroquinone and Amine system) would be more desirable for minimizing microleakage after three-month storage.

• Journal of Korean Society of Forest Science
• /
• v.78 no.2
• /
• pp.151-159
• /
• 1989

The present study has been designed to define the effects of photosynthetically active radiation, leaf temperature, and water stress on photosynthesis and respiration of leaves of four oak species (Quercus mongolica, Quercus aliens, Quercus variabilis, and Quercus serrate). The results obtained are as follows : 1. The estimated light compensation points at which Pn approached zero were 38, 24, 20, and $18{\mu}Em^{-2}s^{-1}$ for Q. aliens, Q. variabilis, Q, mongolica, and Q. serrate, respectively. The light saturation points occurred at $500{\mu}Em^{-2}s^{-1}$ in three oak species except Q, aliens. 2. The maximum rates of Pn were 19.7, 15.2, 11.2, and 11.0 mg $CO_2$ $dm^{-2}h^{-1}$ for Q. variabilis, Q. serrate, Q. monglica, and Q. aliens leaves, respectively. 3. The transpiration rates of Q. variabilis and Q. serrate leaves were slightly higher than those of Q. mongolica and Q. aliens leaves at various photosynthetically active radiations(PAR), but cuticular transpiration rates at dark were similar in four oak species. 4. The optimum photosynthesis occurred at $25^{\circ}C$ in Q. aliens, Q. variabilis, and Q. serrate leaves, but $20^{\circ}C$ in Q. mongolica leaves. In four oak species, the net photosynthesis approached zero at about $40^{\circ}C$. 5. The dark respiration rates of leaves exhibited the following ranking of species : Q, variabilis > Q. mongolica > Q. aliens > Q. serrate. 6. The maximum productive efficiency (Pg/Rd) of leaves occurred highest in Q, serrate at $20^{\circ}C$, then in Q. mongolica at $20^{\circ}C$, then in Q, aliens at $25^{\circ}C$, and finally in Q. variabilis at $15^{\circ}C$. 7. The decrease of net photosynthesis in Q. serrate began at about -1.2 MPa, and then approached zero at -2.9 MPa of leaf water potential. The decrease of net photosynthesis began at 3% of water loss, and then approached zero at 17.5% of water loss. 8. As indicated by tissue-water relations parameters, it may be suggested that Q. aliens and Q. variabilis are more tolerant and favored on xeric forest soils than Q. mongolica and Q. serrate.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.3
• /
• pp.353-360
• /
• 2011

In order to develop the application method of pig compost (PC) and liquid manure (LM) for whole crop barley cultivation, experiments were conducted at Munpo series (coarse loamy, mixed, nonacid, mesic family of Typic Fluvaquents) soil in Gyehwa-reclaimed land, six plots, a LM applied rate as N% ; non-application, chemical fertilizer (CF)100, 100, 50+50, 50+CF50 and (PC30+LM40)+LM50 as basal and additional fertilizer. $NO_3^-$-N content in soil was decreased as along with the growth of plant, highest in LM100% as basal fertilization at early growth stage and highest in (PC30%+LM40%)+LM40% and CF100% at last growth stage. Amount of $NO_3^-$-N and $NH_4^+$-N in soil was high in (PC30%+LM40%)+LM40% and CF100% of top soil but in subsoil significant difference was little in all treatment. Amount of OM, $A_V.P_2O_5$, T-N, exchangeable Ca and Na in soil was higher (PC30%+LM40%)+LM40% than non-application after harvest. Amount of nutrient uptake in plant was higher in CF100% and split application of LM than LM 100% application. Nitrogen utilization rate was in the order of CF100% >LM50%+LM50%=LM50%+CF50%>(PC30%+LM40%)+LM40% >LM100%. The yield of whole crop barley in (PC30%+LM40%)+LM40% and CF100% was 3.2 times more than in non-application ($309kg\;10a^{-1}$). Feed values such as crude protein and TDN was increased 1.0% ~ 1.4% in LM as split application than basal 100% treatment. Accordingly, in order to increase yield of a whole crop barley with application PC+LM in reclaimed land treat split application rather than to treat LM 100% into the land.

• Food Engineering Progress
• /
• v.21 no.3
• /
• pp.225-232
• /
• 2017

Most of the red ginseng (RG) products contain active substances derived from hot water or alcohol extraction. Since active substances of RG are divided into two types - water-soluble and liposoluble - water or alcohol is needed as an extraction solvent and this leads the different extraction yields and components of the active substances. To overcome the limit, whole red ginseng powder can be used and consumed by consumers. In this study, the physicochemical properties and extractable active substance contents of variable-sized RG powder ($158.00{\mu}m$, $8.45{\mu}m$, and $6.33{\mu}m$) were analyzed, and dispersion stability was measured to investigate the suitable size of RG powder for industrial processing. In the results, no significant difference was found from the changes in color intensity and thiobarbutric acid tests at $4^{\circ}C$, $25^{\circ}C$, and $40^{\circ}C$ for 4 weeks. There was no significant difference on the production of antioxidants and ginsenoside among the samples (p>0.05). In dispersion stability, $RG-158.00{\mu}m$ was precipitated immediately, and the dispersion stabilities between $RG-8.45{\mu}m$ and $RG-6.33{\mu}m$ showed no significant difference. It implies that fine RG is suitable for the production process. With further study, it seemed that the physicochemical effects of RG particle sizes can be clearly revealed.