• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.12
• /
• pp.1930-1938
• /
• 2018

Objective: The present study attempted to determine safe and sufficient growth promoters in poultry feeding. Methods: A total of 520 seven-day-old quail chicks were randomly allotted to eight treatment groups in a $4{\times}2$ factorial design experiment to evaluate the effect of different levels of humic acid (HA) and black cumin (BC) seed and their interactions on growth, carcass traits, gut microbes, and blood chemistry of growing quails. Quails were randomly distributed into 8 groups in a $4{\times}2$ factorial design, included 4 HA levels (0, 0.75, 1.5, and 2.25 g/kg diet) and 2 BC levels (0 or 5 g/ kg diet). Results: Increasing HA level associated with a gradual increase in final weight, feed intake and body weight gain along with an improvement in feed conversion ratio. Dietary addition of 5 g BC powder/kg diet gave similar results. The highest level of HA (2.25 g/kg diet) recorded the best values of carcass weight, breast yield, intestinal length, and intestinal weight comparing with the control and other HA levels. Total viable microbial counts decreased (p<0.05) with increasing levels of HA except the intermediate level (1.5 g/kg diet). The concentration of serum cholesterol and low density lipoprotein (excluding that 0.75 g HA) decreased (p<0.05) and high density lipoprotein increased (p = 0.034) along with increasing HA level. The interaction between the $2.25g\;HA{\times}5g$ gave the best results regarding most studied parameters. Conclusion: These findings indicated that HA combined with BC could be used as effective growth promoters, with the recommended level being 2.25 g HA+5 g BC/kg of quail diet.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.4
• /
• pp.249-254
• /
• 2008

Solid dispersions of poorly water-soluble drug, atorvastatin, were prepared with Eudragit L100 to improve the solubility by spray dryer. To investigate the correlation between physicochemical properties and dissolution rate of solid dispersions, the samples were characterized by scanning electron microscopy (SEM), differential scanning calorimeter (DSC) and fourier transform infrared spectroscopy (FT-IR). SEM and DSC were found that atorvastatin is amorphous in the Eudragit L100 solid dispersion. FT-IR was used to analyze the salt formation by interaction between atorvastatin and Eudragit L100. The dissolution rate of solid dispersed atorvastatin was markedly increased compared to drug powder in stimulated intestinal juice (pH 6.8). Thus, the solid dispersed atorvastatin using the spray drying method with Eudragit L100 may be effective for the bioavailability.

• Interaction and multiscale mechanics
• /
• v.1 no.2
• /
• pp.211-230
• /
• 2008

Owing to the growing size of the eigenvalue problem and the growing number of eigenvalues desired, solution methods of iterative nature are becoming more popular than ever, which however suffer from low efficiency and lack of proper convergence criteria. In this paper, three efficient iterative eigenvalue algorithms are considered, i.e., subspace iteration method, iterative Ritz vector method and iterative Lanczos method based on the cell sparse fast solver and loop-unrolling. They are examined under the mode error criterion, i.e., the ratio of the out-of-balance nodal forces and the maximum elastic nodal point forces. Averagely speaking, the iterative Ritz vector method is the most efficient one among the three. Based on the mode error convergence criteria, the eigenvalue solvers are shown to be more stable than those based on eigenvalues only. Compared with ANSYS's subspace iteration and block Lanczos approaches, the subspace iteration presented here appears to be more efficient, while the Lanczos approach has roughly equal efficiency. The methods proposed are robust and efficient. Large size tests show that the improvement in terms of CPU time and storage is tremendous. Also reported is an aggressive shifting technique for the subspace iteration method, based on the mode error convergence criteria. A backward technique is introduced when the shift is not located in the right region. The efficiency of such a technique was demonstrated in the numerical tests.

• Membrane and Water Treatment
• /
• v.7 no.4
• /
• pp.277-296
• /
• 2016

The aim of this research was to investigate the ability of nanofiltration (NF) and ultrafiltration (UF) membranes as a filtration unit for groundwater treatment for drinking water resources. Commercial membranes denoted as TS40, TFC-SR3 and GHSP were used to study the performance based on rejections and fluxes. The investigation has been conducted using natural groundwater obtained from a deep tube well with initial concentration of iron (Fe) and manganese (Mn) at 7.15 mg/L and 0.87 mg/L, respectively. Experimental results showed that NF membranes exhibited higher fluxes than UF membrane with pure water permeability at 4.68, 3.99 and $3.15L.m^{-2}.h^{-1}.bar^{-1}$, respectively. For metal rejection, these membranes have performed higher removal on Fe with TS40, TFC-SR3 and GHSP membranes having more than 82%, 92% and 86% respectively. Whereas, removal on Mn only achieved up to 60%, 80% and 30%, for TS40, TFC-SR3 and GHSP membranes respectively. In order to achieve drinking water standard, the membranes were efficient in removing Fe ion at 1 and 2 bar in contrast with Mn ion at 4 and 5 bar. Higher rejection of Fe and Mn were achieved when pH of feed solution was increased to more than 7 as TFC-SR3 membrane was negatively charged in basic solution. This effect could be attributed to the electrostatic effect interaction between membrane material and rejected ions. In conclusion, this study proved that NF membrane especially the TFC-SR3 membrane successfully treated local groundwater sources for public drinking water supply in line with the WHO standard.

• Structural Monitoring and Maintenance
• /
• v.5 no.2
• /
• pp.231-242
• /
• 2018

Subway tunnel structure has been rapidly developed in many cities for its strong transport capacity. The model-based damage detection of subway tunnel structure is usually difficult due to the complex modeling of soil-structure interaction, the indetermination of boundary and so on. This paper proposes a new data-based method for the damage detection of subway tunnel structure. The root mean square acceleration and cross correlation function are used to derive a statistical pattern recognition algorithm for damage detection. A damage sensitive feature is proposed based on the root mean square deviations of the cross correlation functions. X-bar control charts are utilized to monitor the variation of the damage sensitive features before and after damage. The proposed algorithm is validated by the experiment of a full-scale two-rings subway tunnel lining, and damages are simulated by loosening the connection bolts of the rings. The results verify that root mean square deviation is sensitive to bolt loosening in the tunnel lining and X-bar control charts are feasible to be used in damage detection. The proposed data-based damage detection method is applicable to the online structural health monitoring system of subway tunnel lining.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.6
• /
• pp.948-953
• /
• 2007

The relative performance and immune response was evaluated in White Leghorn layers fed liquid DL-methionine hydroxyl analogue-free acid (MHA-FA) relative to dry DL-methionine (DLM) in maize-soybean-sunflower based diets. Three graded levels of methionine (Met) from DLM or MHA-FA were added to the basal diet containing 0.27% Met on an equimolar basis to achieve 0.30, 0.36 and 0.42% Met in the diet. Each diet was fed ad libitum to 25 replicates of one bird (individual feeding) each, from 24 to 40 weeks of age. A regime of 16 h light was provided and all the layers were kept under uniform management throughout the experimental period. None of the parameters studied were influenced by the interaction between source and level of Met in diets. Similarly, the majority of parameters, except for daily feed consumption and immune response (influenced by level) and egg specific gravity and shell thickness (influenced by source), were not affected by either source or level of Met in the diets. Feed consumption was significantly lower in the birds fed a diet containing 0.42% Met compared to those fed lower levels of Met. The cutaneous basophilic hypersensitivity response to PHA-P and antibody titre (32 and 40 wk) to inoculation of sheep red blood cells increased significantly by increasing the concentration of Met in the diet from 0.30 to 0.36%. Thus, the Met requirement for immune competence was higher than for optimum production. The source of Met significantly influenced the egg specific gravity and shell thickness. The specific gravity and shell thickness of eggs increased significantly when MHA-FA was used as the source of Met in the diet compared to DLM. From the study it is concluded that Met requirement for immune competence (360 mg/b/d) is higher than for optimum production (300 mg/b/d). MHA-FA was comparable with DLM as a source of Met for production performance and immunity, when the bioavailability of MHA-FA was considered as 88% of DLM. Further, MHA-FA improved egg shell quality compared to DLM.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.10
• /
• pp.5037-5042
• /
• 2012

Background: Tobacco contains agents which generate various potent DNA adducts that can cause gene mutations. Production of DNA adducts may be neutralized by glutathione S transferase (GST) along with other phase I and phase II enzyme systems. The existence of null type of GST among the population increases the susceptibility to various disorders and diseases. The present study focuses on the impact of high tobacco usage and possible null type mutation in GST loci. Methods: Genotypes of GST were detected by multiplex polymerase chain reaction in unrelated 504 volunteers of high tobacco using natives of Gujarat. Allelic frequencies were calculated using Statistical Package for Social Studies-16 software. Hardy Weinberg Equilibrium (HWE) was calculated using Chi square test. Two sided Fisher's significance test was used to compare allelic frequencies of different populations. Results: The frequency of homozygous null genotype of GSTM1 and GSTT1 were 20% (95% CI 16.7-23.9) and 35.5% (95% CI 31.4-39.9) respectively. The GSTM1 and GSTT1 null allele frequency distribution in the Gujarat population was significantly deviating from HWE. GSTT1 null frequency of Gujaratians was significantly higher and different to all reported low tobacco using Indian ethnics, while GSTM1 was not differing significantly. Conclusion: Tobacco usage significantly influences the rate of mutation and frequency of GSTT1 and M1 null types among the habituates. The rate of mutation in GSTT1 loci was an undeviating response to the dose of tobacco usage among the population. This mutational impact of tobacco on GSTT1 postulates the possible gene - environment interaction and selection of null genotype among the subjects to prone them under susceptible status for various cancers and even worst to cure the population with GSTT1 dependent drugs.

• The Korean Journal of Physiology and Pharmacology
• /
• v.3 no.5
• /
• pp.513-519
• /
• 1999

Direct exposure of renal tubular brush-border membranes (BBM) to free cadmium (Cd) causes a reduction in phosphate (Pi) transport capacity. Biochemical mechanism of this reduction was investigated in the present study. Renal proximal tubular brush-border membrane vesicles (BBMV) were isolated from rabbit kidney outer cortex by Mg precipitation method. Vesicles were exposed to $50{\sim}200\;{\mu}M\;CdCl_2$ for 30 min, then the phosphate transporter activity was determined. The range of Cd concentration employed in this study was comparable to that of the unbound Cd documented in renal cortical tissues of Cd-exposed animals at the time of onset of renal dysfunction. The rate of sodium-dependent phosphate transport $(Na^+-Pi\;cotransport)$ by BBMV was determined by $^{32}P-Iabeled$ inorganic phosphate uptake, and the number of $Na^+-Pi$ cotransporters in the BBM was assessed by Pi-protectable $^{14}C-labeled$ phosphonoformic acid $([^{14}C]PFA)$ binding. The exposure of BBMV to Cd decreased the $Na^+-Pi$ cotransport activity in proportion to the Cd concentration in the preincubation medium, but it showed no apparent effect on the Pi-protectable PFA binding. These results indicate that an interaction of renal BBM with free Cd induces a reduction in $Na^+-Pi$ cotransport activity without altering the carrier density in the membrane. This, in turn, suggest that the suppression of phosphate transport capacity $(V_{max})$ observed in Cd-treated renal BBM is due to a reduction in $Na^+-Pi$ translocation by existing carriers, possibly by Cd-induced fall in membrane fluidity.

• Nuclear Engineering and Technology
• /
• v.51 no.8
• /
• pp.2005-2012
• /
• 2019

This work investigated the radiation attenuation characteristics of three series of tellurite glass systems with the following compositions: 30PbO-10ZnO-xTeO₂-(60-x)B₂O₃ where x = 10, 30, 40, 50 and 60 mol%, xBaO-xB₂O₃-(100-2x)TeO₂ with x = 15-40 mol% and 50ZnO-(50-x)P₂O₅-xTeO₂, where x = 0, 10, .40 mol%. The results revealed that the attenuation parameters in all the samples decrease with increase in the energy, which implied that all the samples have better interaction with gamma photons at low energies and thus higher photon attenuating efficiency. From the three systems, the samples coded as PbZnBTe60, BaBTe70 and ZnPTe40 have the lowest half value layer values and accordingly have superior photon attenuation efficacy. The maximum effective atomic number values were found for energy less than 0.1 MeV particularly near the K-edges absorption of the heavy atomic number elements such as Te, Ba and Pb. At the lowest energy, the Z_eff values are found in the range of 62.33-66.25, 49.43-50.81 and 24.99-35.83 for series 1-3 respectively. Also, we found that the density of the glass remarkably affects the photon attenuation ability of the selected glasses. The mean free path results showed that the PbO-ZnO-TeO₂-B₂O₃ glass system has better radiation shielding efficiency than the glass samples in series 2 and 3.

• Journal of Nuclear Fuel Cycle and Waste Technology
• /
• v.1 no.1
• /
• pp.65-73
• /
• 2013

Temperature-dependent hydrolysis behaviors of aqueous U(VI) species were investigated with time-resolved laser fluorescence spectroscopy (TRLFS) in the temperature range from 15 to $75^{\circ}C$. The formation of four different U(VI) hydrolysis species was measured at pHs from 1 to 7. The predominant presence of $UO{_2}^{2+}$, $(UO_2)_2(OH){_2}^{2+}$, $(UO_2)_3(OH){_5}^+$, and $(UO_2)_3(OH){_7}^-$ species were identified based on the spectroscopic properties such as fluorescence wavelengths and fluorescence lifetimes. With an increasing temperature, a remarkable decrement in the fluorescence lifetime for all U(VI) hydrolysis species was observed, representing the dynamic quenching behavior. Furthermore, the increase in the fluorescence intensity of the further hydrolyzed U(VI) species was clearly observed at an elevated temperature, showing stronger hydrolysis reactions with increasing temperatures. The formation constants of the U(VI) hydrolysis species were calculated to be $log\;K{^0}_{2,2}=-4.0{\pm}0.6$ for $(UO_2)_2(OH){_2}^{2+}$, $log\;K{^0}_{3,5}=-15.0{\pm}0.3$ for $(UO_2)_3(OH){_5}^+$, and $log\;K{^0}_{3,7}=-27.7{\pm}0.7$ for $(UO_2)_3(OH){_7}^-$ at $25^{\circ}C$ and I = 0 M. The specific ion interaction theory (SIT) was applied for the extrapolation of the formation constants to infinitely diluted solution. The results of temperature-dependent hydrolysis behavior in terms of the U(VI) fluorescence were compared and validated with those obtained using computational methods (DQUANT and constant enthalpy equation). Both results matched well with each other. The reaction enthalpies and entropies that are vital for the computational methods were determined by a combination of the van't Hoff equation and the Gibbs free energy equation. The temperature-dependent hydrolysis reaction of the U(VI) species indicates the transition of a major U(VI) species by means of geothermal gradient and decay heat from the radioactive isotopes, representing the necessity of deeper consideration in the safety assessment of geologic repository.