• 한국지진공학회논문집
• /
• 제15권6호
• /
• pp.1-10
• /
• 2011

이 연구는 중공 프리스트레스트 콘크리트 교각의 P-M 상관도에 대한 매개변수 분석을 수행한 결과를 제시하고 있다. 다수의 매개변수 중에 콘크리트 압축강도, PS 강재량, 유효프리스트레스, $D_s/D_o$, 그리고 $D_i/D_o$를 선택하여 P-M 상관도에 미치는 영향을 중점적으로 다루었다. 준정적 실험을 통해서 중공 프리스트레스트 콘크리트 교각 실험체의 강도와 연성도를 평가하였다. 실험 및 해석결과와 각 코드를 기준으로 비교한 P-M상관도의 결과는 서로 다른 차이를 나타내었으며 AASHTO-LRFD는 근접한 값을 보여주었다. 무차 원화한 P-M 상관도를 중공 프리스트레스트 콘크리트 교각의 저항능력을 예측하기 위하여 제시하였다.

• Computers and Concrete
• /
• 제19권5호
• /
• pp.545-553
• /
• 2017

In the authors' previous study, an axial force-flexural moment (P-M) interaction curve model was proposed to evaluate fire-resisting performances of reinforced concrete (RC) column members. The proposed method appeared to properly consider the axial and flexural strength degradations including the secondary moment effects in RC columns due to fire damage. However, the detailed P-M interaction curve model proposed in the authors' previous study requires somewhat complex computational procedures and iterative calculations, which makes it difficult to be used for practical design in its current form. Thus, the aim of this study was to develop a simplified P-M interaction curve model of RC columns exposed to fire considering the effects of fire damage on the material performances and magnitudes of secondary moments. The simplified P-M interaction model proposed in this study was verified using 66 column fire test results collected from literature, and the verification results showed that the proposed simplified method can provide an adequate analysis accuracy of the failure loads and fire-resisting times of the RC column specimens.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.143-144
• /
• 2010

강도 설계법에 기반을 둔 콘크리트구조설계기준은 전 응력의 계산이 불가능하기 때문에 한계 상태 설계법에 근간을 둔 EC2와 휨 압축부재의 P-M상관도를 비교분석하였다. 해석결과, 설계기준에 따라 P-M상관도는 거의 유사하였지만 피복두께가 클 경우 EC2에 의한 값이 보다 안전 측에 해당하였다.

• Journal of Pharmaceutical Investigation
• /
• 제41권2호
• /
• pp.95-102
• /
• 2011

An amphiphilic cationic branched methoxy poly (ethylene glycol)-branched polyethylenimine - poly(L-phenylalanine) (mPEG-bPEI-pPhe) block copolymer was successfully synthesized by ring-opening polymerization (ROP) of N-carboxyanhydride of L-phenylalanine (Phe-NCA) with mPEG-bPEI for the preparation of more stable polyelectrolyte complex (PEC) included a hydrophobic interaction. mPEG-bPEI was firstly prepared by the coupling of mPEG and bPEI using hexamethylene diisocyanate (HMDI). The structural properties of mPEG-bPEI-pPhe copolymers were confirmed by $^1H$ NMR. The copolymers exhibited a self-assemble behavior in water above critical aggregate concentration (CAC) in the range of 0.01-0.14 g/L. The CAC of copolymers obviously depended on the hydrophobic block content in the copolymers (the value decreased with the increase of the pPhe block content). The cationic copolymers have the ability to form multi-interaction complex (MIC) with bovine serum albumin (BSA) and plasmid DNA through multi-interaction (electrostatic and hydrophobic interaction). The physicochemical characterization of the complex was carried out by the measurement of zeta potential and particle size. Their zeta-potentials were positive (approximately +10 mV) and their sizes decreased with increasing pPhe contents in the copolymers (PPF/BSA wt% ratio = 2). The complex showed good stability at high ionic strength. Therefore, mPEG-bPEI-pPhe block copolymer was considered as a potential material to enhance the stability of complex including biotherapuetic drugs.

• 대한토목학회논문집
• /
• 제34권2호
• /
• pp.355-365
• /
• 2014

원형 콘크리트 충전 강관(CFT)은 급속시공이 가능하고 뛰어난 좌굴 성능 및 콘크리트의 구속효과와 같은 여러 장점을 가지고 있어, 건축물의 기둥이나 교량의 교각으로 이용되고 있다. 하지만 CFT는 이러한 장점에도 불구하고 널리 이용되고 있지 않고 있다. 이러한 이유는 CFT의 설계기준들이 서로 상이하여 보수적인 설계가 이루어지고 있는 것에 일부 기인한다. 이 연구에서는 CFT설계에 널리 이용되는 AISC 및 EC4 설계기준의 타당성을 기존 연구자들이 수행한 실험 결과 및 이 연구에서 수행된 유한요소해석 결과를 이용하여 검증하였다. 특히 축력과 휨모멘트가 동시에 작용하는 CFT에 대하여 AISC 및 EC4에서 제안한 P-M 상관곡선의 타당성 검증에 초점을 두었다. 연구 결과, 기존의 P-M 상관곡선은 CFT의 강도를 상당히 보수적으로 예측하는 것을 알 수 있었다. 이 연구에서는 개선된 P-M 상관곡선을 제안하고 기존 실험 결과 및 이 연구에서 수행한 유한요소해석 결과를 이용하여 검증하였다.

• Archives of Pharmacal Research
• /
• 제18권5호
• /
• pp.301-307
• /
• 1995

In the particulate fraction obtained from PKC-down regulated K562 cells by treatment for 24 h with 200nM TPA, phosphorylation of two proteins with molecular weight, 100 kDa and 23 kDa (designated p100 and p23, respectvely) was depleted and addition of exogenous purified PKC to this fraction failed to testore their phosphorylation. However, in the soluble fraction, all of phosphoproteins abolished by long-term treatment with TPA were restored by exogenously added PKC. Phosphorylation of two proteins was increased by short-term tretment (20 min), and diminished with the persistant exposure to TPA as well as at a concentration as low as 1nM. When K562 cells were treated with 1 nM and 200 nM TPA for 24 h, phosphorylation of p100 was restored with or without exogenous PKC on 2-3day and 6day after removal of treated TPA, respectively. Two-dimensional electrophoresis of phosphoproteins revealed that phosphorylated p100 (pl=5.9) and p66 species were completely absent from the particulate fraction of K562 cells treated with 200nM TPA for 24 h. These results suggest that the interaction of sensitive endogenous substrates, p100 and p23 with the plasma membrane might be regulated by PKC-down regulation without displacement to the cytosol and the interaction of p100 with the membrane might be reveersible.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.621-626
• /
• 1998

In this study, the analytic model of concrete column strengthened with CFS(carbon fiber sheets) for obtaining P-M interaction is presented. Firstly, an algorithm to evaluate accurate behavior of CFS is presented using laminate theory. Stress-strain model of CFS is presented based on the results of this algorithm. Secondly, an algorithm to evaluate stress-strain relationship of concrete column confined with CFS is presented. In order to evaluate the reliability of these algorithms, the results of analysis are compared with experimental data. Lastly, section analysis is performed by using constitutive equations of materials. As a result, P-M interaction curve of the column strengthened is obtained and the strengthening effects of CFs are analyzed.

• Computers and Concrete
• /
• 제19권5호
• /
• pp.537-544
• /
• 2017

The strength and deformational capacity of slender reinforced concrete (RC) columns greatly rely on their slenderness ratios, while an additional secondary moment (i.e., the $P-{\delta}$ effect) can be induced especially when the RC column members are exposed to fire. To evaluate the fire-resisting performances of RC columns, this study proposed an axial force-flexural moment (i.e., P-M) interaction curve model, which can reflect the fire-induced slenderness effects and the nonlinearity of building materials considering the level of stress and the magnitude of temperature. The P-M interaction model proposed in this study was verified in detail by comparing with the fire test results of RC column specimens reported in literature. The verification results showed that the proposed model can properly evaluate the fire-resisting performances of RC column members.

• 한국강구조학회 논문집
• /
• 제27권1호
• /
• pp.31-42
• /
• 2015

소성응력분포법과 변형률적합법은 콘크리트충전 각형강관(RCFT, rectangular concrete filled tube) 기둥의 P-M조합강도 산정을 위한 대표적인 두 방법으로, 일반적으로 소성응력분포법은 근사적인 강도치를 제공하는 반면 변형률적합법은 단면에 사용되는 각 물성치의 구성방정식이 정확하다는 전제 하에서 정해에 가까운 해를 제공한다. 최근 변형률적합법에 따른 RCFT기둥의 P-M조합강도 산정에 관한 필자의 연구에 따르면, 현재 연구된 외부 강관으로 구속된 콘크리트 구성방정식이 부정확하기 때문에, 변형률적합법을 통해 산정된 다양한 물성치를 가지는 콘크리트와 강재의 조합으로 이루어진 단면의 P-M조합 강도가 부정확하게 산정되는 것으로 나타났다. 이에 따라 본 연구에서는 기존에 수행된 실험결과를 분석하여 콘크리트충전 각형 강관기둥의 P-M 조합강도 예측을 위한 변형률적합법에 활용될 수 있는 충전콘크리트의 구성방정식을 제시하고 그 타당성을 입증하였다. 본 연구에서 추구하는 모형은 실무적용을 위한 우회적이고 현상학적 모형으로, 외부 강재와 내부 콘크리트 간 상대강도비와 강재의 판폭두께비의 P-M조합강도에 대한 영향을 압괴변형률의 크기에 반영하여 단면내의 힘의 재분배 정도를 조절함으로써 실험결과와 합치하는 결과를 얻어내는 모형이다. 이를 위해 현 규준에서 제시하고 있는 압괴변형률 0.003의 일괄적 제한의 한계를 지적하였으며, 상대강도비와 판폭두께비의 P-M조합강도에 대한 영향을 압괴변형률의 크기에 반영하여 단면내의 힘의 재분배 정도를 조절함으로써 실험결과와 합치하는 결과를 얻어내는 모형을 제시하였다.

• Steel and Composite Structures
• /
• 제16권1호
• /
• pp.97-114
• /
• 2014

This paper deals with a study on ultimate strength behaviour of eccentrically loaded CFT columns with and without shear connectors. Thirty specimens are subjected to experimental investigation under eccentric loading condition. P-M curves are generated for all the test specimens and critical eccentricities are evaluated. Three different D/t ratios such as 21, 25 and 29 and L/D ratios varying from 5 to 20 are considered as experimental parameters. Six specimens of bare steel tubes as reference specimens, twelve specimens of CFT columns without shear connectors and twelve specimens of CFT columns with shear connectors, in total thirty specimens are tested. The P-M values at the ultimate failure load of experimental study are found to be well agreed with the results of the proposed P-M interaction model. The load-deflection and load-strain behaviour of the experimental column specimens are presented. The behaviour of the CFT columns with and without shear connectors is compared. Experimental results indicate that the percentage increase in load carrying capacity of CFT columns with shear connectors compared to the ordinary CFT columns is found to be insignificant with a value ranging from 6% to 13%. However, the ductility factor of columns with shear connectors exhibit higher values than that of the CFT columns without shear connectors. This paper presents the proposed P-M interaction model and experimental results under varying parameters such as D/t and L/D ratios.