• Journal of Microbiology and Biotechnology
• /
• 제33권7호
• /
• pp.895-908
• /
• 2023

Disposal of waste containing heavy metals into the environment is a major threat to human health and can result in toxic or chronic poisoning in aquatic life. In the current study, metal-resistant Raoultella ornithinolytica was isolated from metal-contaminated samples collected from the Tanjaro River, located southwest of Sulaymaniyah, Iraq. R. ornithinolytica was identified by partial amplification of 16S rRNA. The uptake potency of heavy metals was assessed using inductively coupled plasma-optical emission spectroscopy (ICP-OES) and indicated that R. ornithinolytica removed 67, 89, 63.4, 55.6, 56.5, 65, and 61.9% of Cd, Pb, Cr, Ni, Zn, Co, and Fe, respectively. These removal rates were influenced by temperature, pH, and contact time; at 35℃ and pH 5 with a change in the incubation time, the reduction rate improved from 89 to 95% for Pb, from 36.4 to 45% for Cu, and from 55.6 to 64% for Ni. Gene analysis indicated that R. ornithinolytica contained pbrT, chrB, nccA, iroN, and czcA genes, but the pcoD gene was absent. Energy-dispersive X-ray spectroscopy (EDS) images showed evidence of metal ion binding on the cell wall surface with different rates of binding. Transmission electron microscopy (TEM) detected different mechanisms for metal particle localization; cell surface adsorption was the main mechanism for Pb, Zn, and Co uptake, while Cd, Ni, and Fe were accumulated inside the cell. The current study describes, for the first time, the isolation of R. ornithinolytica from metal-contaminated water, which can be used as an eco-friendly biological expedient for the remediation and detoxification of metals from contaminated environments.

• 분석과학
• /
• 제19권5호
• /
• pp.394-399
• /
• 2006

본 연구에서는 반도체 웨이퍼 연마 공정에 사용한 산화제와 첨가제의 연마 속도에 미치는 영향과 전기 화학적 특성에 대해 조사하였다. 산화제로는 과산화수소, 질산화 철과 요오드산 칼륨을 사용하였으며, 이들은 연마액의 pH와 종류에 따라 텅스텐 막질에서 상이한 산화반응을 나타내었다. 이러한 차이점은 연마성능에 영향을 끼치며, 과산화수소는 식각반응이 질산화 철과 요오드산 칼륨에서는 부동태 반응이 우세하였다. 그리고 염기성 화합물인 TMAH와 KOH를 연마액에 첨가하였을 때 텅스텐에 대한 전위 에너지 변화 증가 및 연마 제거속도 증가를 확인할 수 있었으며, 제타 전위 값의 절대 값 증가를 통해 분산성 향상에도 도움이 되는 것을 알 수 있었다. 마지막으로 음이온 계면 활성제중 평균 분자량이 25만인 폴리아크릴산을 100 ppm 첨가시 연마 입자의 뭉침 현상이 줄어들면서 분산성 향상에 효과적인 것을 알 수 있었다.

• 한국재료학회지
• /
• 제34권5호
• /
• pp.254-260
• /
• 2024

This study is to manufacture a titanium dioxide (TiO₂) photocatalyst by recycling sludge generated using titanium tetrachloride (TiCl₄) as a coagulant. Compared to general sewage, a TiCl₄ coagulant was applied to dyeing wastewater containing a large amount of non-degradable organic compounds to evaluate its performance. Then the generated sludge was dried and fired to prepare a photocatalyst (TFS). Scanning electron microscope-energy dispersive X-ray spectroscopy (SEM-EDX), X-ray diffraction (XRD), and nitrogen oxide reduction experiments were conducted to analyze the surface properties and evaluate the photoactive ability of the prepared TFS. After using titanium tetrachloride (TiCl₄) as a coagulant in the dyeing wastewater, the water quality characteristics were measured at 84 mg/L of chemical oxygen demand (COD), 10 mg/L of T-N, and 0.9 mg/L of T-P to satisfy the discharge water quality standards. The surface properties of the TFS were investigated and the anatase crystal structure was observed. It was confirmed that the ratio of Ti and O, the main components of TiO₂, accounted for more than 90 %. As a result of the nitric oxide (NO) reduction experiment, 1.56 uMol of NO was reduced to confirm a removal rate of 20.60 %. This is judged to be a photocatalytic performance similar to that of the existing P-25. Therefore, by applying TiCl₄ to the dyeing wastewater, it is possible to solve the problems of the existing coagulant and to reduce the amount of carbon dioxide generated, using an eco-friendly sludge treatment method. In addition, it is believed that environmental and economic advantages can be obtained by manufacturing TiO₂ at an eco-friendly and lower cost than before.

• Hip & pelvis
• /
• 제35권1호
• /
• pp.32-39
• /
• 2023

Purpose: A staged revision with placement of a temporary antibiotic-loaded cement spacer after removal of the implant is the "gold standard" for treatment of chronic prosthetic joint infection (PJI). It enables local delivery of antibiotics, maintenance of limb-length and mobility, easier reimplantation. However, bacterial colonization of spacers and mechanical complications can also occur. The aim of this study is to evaluate functional results and infection control in two-stage treatment of total hip arthroplasty (THA) PJI with and without a spacer. Materials and Methods: A retrospective review of 64 consecutive patients was conducted: 34 underwent two-stage revision using a cement spacer (group A), 30 underwent two-stage revision without a spacer (group B). At the final follow-up, functional evaluation of patients with a THA in site, without PJI recurrence, was performed using the Harris hip score (HHS). Measurement of limb-length and off-set discrepancies was performed using anteroposterior pelvic X-rays. Results: Most patients in group B were older with more comorbidities preoperatively. Thirty-three patients (97.1%) in group A underwent THA reimplantation versus 22 patients (73.3%) in group B (P<0.001). No significant differences in limb-length and off-set were observed. The results of functional evaluation performed during the final follow-up (mean, 41 months) showed better function in patients in group A (mean HHS, 76.3 vs. 55.9; P<0.001). Conclusion: The use of antibiotic-loaded cement spacer seems superior in terms of functional outcomes and reimplantation rate. Resection arthroplasty might be reserved as a first-stage procedure in patients who are unfit, who might benefit from a definitive procedure.

• 환경위생공학
• /
• 제14권3호
• /
• pp.54-62
• /
• 1999

2,4-Dichlorophenol was known pollutants caused by the endocrine disruptor into the refractory substances of environment and this is difficult to be degradable by conventional methods. Therefore, a considerable interest has been devoted to developing new process where 2,4-Dichlorophenol can easily decomposed. In this study, the series of ultrasonic irradiation for removal of 2,4-Dichlorophenol has been selected as a model reaction in the batch reactor system in order to obtain the basic data investigate the influence of various experimental parameters such as concentration, pH, reaction temperature, acoustic intensity. The products obtained form the ultrasonic irradiation were analysed by GC/MS and HPLC. The formation of $H_2O_2$, a well-known the strong oxidant was found proportionally to increase with irradiation time. The intermediates of ultrasonic irradiation of 2,4-Dichlorophenol were identified as HCl, catechol, hydroquinone, o,p-benzoquinone, muconic acid, and maleic acid. The final products of this was $CO_2$ and $H_2O$. As the decomposition of 2,4-Dichlorophenol proceeds by the ultrasonic irradiation, the pH of 2,4-Dichlorophenol containing aqueous solution increases slowly, The decomposition of 2,4-Dichlorophenol was found to be occured fast in the basic medium. In general, the rate of reaction is proportional to the reaction temperature obeying the Arrhenius' law. However, in the ultrasonic irradiation, this suggests as the reaction temperature increase the decomposition rate of the reactant decreases. This result meant that the increase of reaction temperature due to the increase of vapor pressure of water accelerated the decrease of acoustic intensity which was can be proportional to the decomposition rae of these compounds. It was found that more than 80% of phenol solution was removed within hours in all reaction conditions. The reaction order in the degradation of the 2,4-Dichlorophenol compounds was verified as the Pseude-first order. From the fore-mentioned results, it can be concluded that the refractory organic compounds caused by endocrine disruptor as 2,4-dichlorophenol could be removed by the ultrasonic irradiation with radicals, such as $H{\;}{\cdot}{\;}and{\;}OH{\;}{\cdot}$ radical causing the high increase of pressure and temperature. Finally, it apeared that the technology using ultrasonic irradiation can be applied to the treatment of refractory substances caused by endocrine disruptor which are difficult to be decomposed by the conventional methods.

• 한국식품과학회지
• /
• 제5권2호
• /
• pp.101-107
• /
• 1973

비 식용 해조로부터 식용 및 사료용 효모를 제조하기 위하여 다음의 결과를 얻었다. 1) 해조 탄수화물 자화 능력이 강한 효모 균주 Y-2503, J-4-2 를 해조 퇴적물로부터 분리하였다. 2) 분리된 효모 균주는 galactose, sucrose, glucose 의 발효력은 있었으나 maltose 와 mannit 의 발효력은 없었으며 mannit 를 자화시킬 수 있었다. 3) $1{\sim}2%$ NaCl 농도는 효모 증식에 별 영향이 없었으며 최적 pH 는 $4{\sim}5$ 였다. 4) 해조 분해물에서 pH $4{\sim}5$ 일때 침전물을 제거한 배양액에 있어서는 $(NH_4)_2SO_4$, $NaH_2PO_4$ 의 첨가가 당질의 자화와 효모 수량을 증가시켰다. 5) $Co^{60}$ gamma ray 조사(dose rate : 1 Mrad/hr. BNL shipboard irradiator)는 해조의 탄수화물 및 질소 화합물의 분해를 별로 증가시키지 못하였으나 효모 수량은 상당히 증가되었다. 6) Jar fermentor에서 효모를 배양한 결과 건물 해조에 대하여 $7{\sim}8%$의 건물 효모를 생산할 수 있었다.

• 대한기계학회논문집B
• /
• 제34권11호
• /
• pp.991-998
• /
• 2010

소듐냉각 고속로 내부기기 배치 변경에 의한 초기냉각 성능변화를 검토하기 위하여 중간열교환기의 수직배치가 다른 3개의 원자로를 대상으로 COMMIX-1AR/P 코드를 활용한 다차원 해석을 수행하였다. 원통좌표계의 중심축을 기준으로 원주방향의 1/4 부분만을 모델링하고 정상상태 및 과도상태 분석을 수행하여 IHX 수직배치 변화가 초기 냉각 특성에 미치는 영향을 분석하였고, DHX를 통한 후기 냉각 모드 개시 시점에 미치는 영향도 분석하였다. 분석 결과 IHX 수직배치 상승은 원자로 풀내부 자연 순환 유량을 증가시켜 초기 냉각과정에서 노심 최고 온도의 급격한 상승을 방지할 수 있으며, 초기냉각 성능을 향상시키기 위한 관성회전차의 가용설계재원의 범위도 확대시킨다. 또한 IHX 수직배치 상승은 후기냉각모드에 큰 영향을 주지 않으면서 초기냉각성능의 향상에 기여할 수 있을 것으로 사료된다.

• Environmental Engineering Research
• /
• 제16권3호
• /
• pp.137-148
• /
• 2011

In this study, a series of experiments was conducted on the relative degradation of commonly known endocrine-disrupting compounds such as bisphenol A (BPA) and $17{\alpha}$-ethinyl estradiol (EE2) in a single-component aqueous solution using 28 and 580 kHz ultrasonic reactors. The experiments were conducted with three different types of model water: deionized water (DI), synthetic brackish water (SBW), and synthetic seawater (SSW) at pH 4, 7.5, and 11 in the presence of inert glass beads and humic acids. Significantly higher sonochemical degradation (93-97% for BPA) occurred at 580 kHz than at 28 kHz (43-61% for BPA), regardless of water type. A slightly higher degradation was observed for EE2 compared to that of BPA. The degradation rate of BPA and EE2 in DI water, SBW, and SSW after 30 min of ultrasound irradiation at 580 kHz increased slightly with the increase in pH from 4 (0.073-0.091 $min^{-1}$ for BPA and 0.081-0.094 $min^{-1}$ for EE2) to 7.5 (0.087-0.114 $min^{-1}$ for BPA and 0.092-0.124 $min^{-1}$ for EE2). In contrast, significant degradation was observed at pH 11 (0.149-0.221 $min^{-1}$ for BPA and 0.147-0.228 $min^{-1}$ for EE2). For the given frequencies of 28 and 580 kHz, the degradation rate increased in the presence of glass beads (0.1 mm and 25 g) for both BPA and EE2: 0.018-0.107 $min^{-1}$ without beads and 0.052-0.142 $min^{-1}$ with beads for BPA; 0.021-0.111 $min^{-1}$ without beads and 0.054-0.136 $min^{-1}$ with beads for EE2. A slight increase in degradation of both BPA and EE2 was found as the concentration of dissolved organic carbon (DOC, humic acids) increased in both SBW and SSW: 0.107-0.115 $min^{-1}$ in SBW and 0.087-0.101 $min^{-1}$ in SSW for BPA; 0.111-0.111 $min^{-1}$ in SWB and 0.092-0.105 $min^{-1}$ in SSW for EE2. After 30 min of sonicating the humic acid solution, DOC removal varied depending on the water type: 27% (3 mg $L^{-1}$) and 7% (10 mg $L^{-1}$) in SBW and 7% (3 mg $L^{-1}$) and 4% (10 mg $L^{-1}$) in SSW.

• 공업화학
• /
• 제27권5호
• /
• pp.532-536
• /
• 2016

본 연구에서는 하수 슬러지를 대상으로 단상 고온($55^{\circ}C$)과 중온($35^{\circ}C$) 혐기성 소화조의 안정성, 고형물 제거 및 메탄생성을 관찰하였다. 실험 결과 별도의 pH 조절 없이 고온($R_{TAD}$, reactor of thermophilic anaerobic digestion) 및 중온 ($R_{MAD}$, reactor of mesophilic anaerobic digestion) 소화조 내 pH의 경우 혐기 소화 시 안정적인 미생물 활성을 나타낸다고 알려진 6.5-8.0 사이의 값을 소화 기간 내내 유지하는 것을 관찰할 수 있었다. 또한, total alkalinity (TA)의 경우 $R_{TAD}$ 및 $R_{MAD}$ 모두 3-4 g $CaCO_3/L$의 높은 값을 안정적으로 유지하였다. 고형물 제거의 경우 순응 기간 후 $R_{TAD}$에서 43.3%, $R_{MAD}$에서 33.6%의 VS 제거율을 보이며 $R_{TAD}$에서 약 10% 높은 VS 제거율은 제거율을 보였다. 유기산의 경우 $R_{TAD}$ 및 $R_{MAD}$에서 순응 기간 직후 검출되지 않았다. $R_{TAD}$ 및 $R_{MAD}$ 모두 순응 기간 후 안정적인 메탄 생성을 보였으며, $R_{TAD}$에서 $R_{MAD}$에 비해 31.4% 향상된 메탄 생성률이 관찰되었다($R_{TAD}$; 243 mL $CH_4/L/d$; $R_{MAD}$ : 185 mL $CH_4/L/d$). 반면, 두소화조 $R_{TAD}$ 및 $R_{MAD}$에서의 메탄 수율은 유사한 값을 보였다.

• 생태와환경
• /
• 제42권1호
• /
• pp.1-8
• /
• 2009

본 연구에서는 mesocosm을 이용하여, 습지내 인의 거동을 살펴보기 위한 현장실험 자료를 고찰하였으며, 결과를 요약하면 다음과 같다. Mesocosm내 수체의 TP농도는 대조구인 M1에서는 $0.48\;mg\;L^{-1}$에서 $0.6\;mg\;L^{-1}$으로 증가한 반면, 처리구인 M2, M3, M4에서는 12.4, 20.4, $23.6\;mg\;L^{-1}$에서 1.92, 6.97, $6.94\;mg\;L^{-1}$로 감소되었고 TP 감소율은 M2, M3, M4에서 각각 84.5, 65.8, 70.6%로 평균 73.7%의 감소율을 보였다. 처리구 중 부착조류가 사멸하지 않은 M2와 대조구인 M1의 전체적인 물질 수지를 비교해 보면, M1의 경우는 부착조류에서의 인의 양이 소량 증가하였고, 갈대와 퇴적물에서의 인의 양은 소량 감소하였다. M1에서 부착조류의 인의 양이 늘어난 것은 대형수생식물이 고사기에 접어들어 습지내의 광조건이 충분해지면서 조류의 증가가 일어난 것이라 판단된다. M2의 경우엔 퇴적물내의 인의 총양은 5, 443 mg에서 8, 086 mg으로 증가하였고, 부착조류와 갈대 역시 각각 1, 147 mg, 1, 740 mg에서 2, 452 mg, 2.160 mg으로 증가하였다. 이로써 습지내 인의 거동에 있어 부착조류와 거대조류에 의한 인의 흡수와 침전 및 식물체에 의한 흡수가 주된 역할을 한다고 판단되며, 부착조류의 흡수가 활발했던 M2의 경우 TP 감소율이 85%에 이르고 부착조류의 흡수가 없었던 M3, M4에서 70% 이하의 TP 감소율을 나타낸 것을 볼 때, 침전과 식물체에 의한 흡수가 병행되는 것이 고농도의 TP처리에 상당히 효과적이라 생각된다. Mesocosm을 이용한 인의 이동경로 추정은 영향인자가 많은 습지내 오염물질 거동을 규명하는 매우 유용한 방법이라 판단되며, 그 결과는 인공습지를 조성하여 활용하는 데 필요한 기초자료로서 활용될 수 있을 것으로 판단된다.