• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.2 s.302
• /
• pp.27-36
• /
• 2005

This thesis proposed an effective encryption method for the DCT-based image/video contents and made it possible to operate in a high speed by implementing it as an optimized hardware. By considering the increase in the amount of the calculation in the image/video compression, reconstruction and encryption, an partial encryption was performed, in which only the important information (DC and DPCM coefficients) were selected as the data to be encrypted. As the result, the encryption cost decreased when all the original image was encrypted. As the encryption algorithm one of the multi-mode AES, DES, or SEED can be used. The proposed encryption method was implemented in software to be experimented with TM-5 for about 1,000 test images. From the result, it was verified that to induce the original image from the encrypted one is not possible. At that situation, the decrease in compression ratio was only $1.6\%$. The hardware encryption system implemented in Verilog-HDL was synthesized to find the gate-level circuit in the SynopsysTM design compiler with the Hynix $0.25{\mu}m$ CMOS Phantom-cell library. Timing simulation was performed by Verilog-XL from CadenceTM, which resulted in the stable operation in the frequency above 100MHz. Accordingly, the proposed encryption method and the implemented hardware are expected to be effectively used as a good solution for the end-to-end security which is considered as one of the important problems.

• Korean Journal of Community Nutrition
• /
• v.11 no.4
• /
• pp.449-458
• /
• 2006

The purpose of this study was to determine the characteristics of infants' temperaments and eating behaviors, mothers' eating behaviors and feeding practices in poor eating infants. The participants were 80 infants of 12-24 months (27 poor eaters and 53 matched normal controls) from a hospital and a public health center. Mothers were questioned about their eating behaviors and feeding practices, and infants' temperaments, eating behaviors, and nutrient intakes by one day food recall. Subjects were divided by mean nutrient adequacy ratio (MAR, < 0.75; poor eater). Intakes of Ca, P, Fe, Zn, thiamin, riboflavin, niacin, vitamin C, E, folate were below 75% RDA in poor eaters, whereas protein, thiamin, riboflavin, vitamin B$_6$, C, folate exceeded 125% RDA in good eaters. Rhythmicity of infants' temperaments and eating behaviors, restriction of mothers' eating behaviors and feeding practices were significantly lower, whereas activity levels of infants' temperaments were higher than good eaters. In multiple logistic regression model of poor eaters, activity of infants' temperaments (T, OR: 1.19, CI: 1.05 - 1.35) and attention spans of infants' eating behaviors (A, OR: 1.18, CI: 1.03 - 1.35) were significantly positive, whereas rhythmicity of infants' eating behaviors (R, OR: 0.79, CI: 0.61-0.94) was significantly negative [E (the legit) : -6.8644+0.1712$\times$T-0.2337$\times$R+0.1641$\times$A]. Our findings suggest that examination of eating behaviors, feeding practices, and temperaments will help target interventions to improve infants' food intakes, and these variables should be examined at the time of nutrition counseling.

• Journal of Mushroom
• /
• v.18 no.3
• /
• pp.274-279
• /
• 2020

This study was conducted to investigate the characteristics of the medium used on the composting step, comparing the excavator agitator with the self-propelled turner. The temperature of the outdoor composting medium tended to increase rapidly after flipping in the turner. The late composting medium temperature was maintained at the excavator treatment area (farm practice), and the late composting effect progressed. During the field composting stage, various microorganisms such as Bacillus spp., Actinomycetes, fluorescent Pseudomonas spp., and filamentous fungi were distributed in the medium, and the density of aerobic bacteria involved in the decomposition of the medium was increased. Under high-temperature composting conditions, blue fungi, and mesophilic actinomycetes were inhibited or killed. Thermophilic actinomycetes, which play an important role in decomposing organic matter, showed higher densities than those observed in farm practices in the self-propelled turner process. The length of rice straw was slightly shorter when the self-propelled turner was used, and the water content did not show any significant difference between treatments. The a and b values tended to increase as the inverter was turned over. The CN ratio of the composting broth was lowered from 23.1 to 16.2 for the 5th turnover in the context of farming practices, and from 23.3 to 16.9 in the context of the self-propelled turner. The yield of each treatment was increased by 20% in 1 period, 28% in 2 periods, and 26% in 3 periods; the overall yield was 23%.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.10a
• /
• pp.15-15
• /
• 1999

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the conventional rotating barrel. vibrational barrel (vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components, The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed that the average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value, Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components, However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. $2HD{\;}+{\;}e{\;}{\rightarrow}20H{\;}+{\;}H_2$ Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure thereby resulting to bad plating condition. 1 lot of chip was divided into two equal partion. Each portion was loaded to the same barrel one after the other. Nickel plating and tin-lead plating was performed in the same station. Portion A maintained the normal barrel vibration intensity and portion B vibration intensity was increased two steps higher. All other parameters, current, solution condition were maintained constant. Generally, plating method find procedures were carried out in a best way to maintained the best plating condition. After plating, samples were taken out from each portion. molded and polished. Plating thickness was investigated for both. To check consistency of results. 2nd trial was done now using different lot of another characteristics.

• Weed & Turfgrass Science
• /
• v.2 no.3
• /
• pp.298-305
• /
• 2013

Soldier fly casts produced by eco-friendly treatment of food waste with American soldier fly was composting cast mixed food waste compost and soldier fly pupa. This study was conducted to evaluate a possibility of soldier fly casts (SFC) as soil amendment by investigating soil properties and zoysiagrass growth. Amendments were selected coco peat, compost and SFC and their ratio mixed with sand were non-amendment (NA), 7% coco peat(Coco), 7% compost (Comp), 3.5% SFC (1/2SFC) and 7% SFC. In soil properties, SFC was increased CEC than NA and T-N, Av-$P_2O_5$ and exchangeable K in soil than Coco. Compared with Coco and Comp, turf quality such as turf color index and chlorophyll index in SFC was higher and root length of zoysiagrass longer. Growth of shoot, runner and root in SFC was increase than that of Coco and Comp. These results indicated that 7% SFC applied as soil amendment was improved growth and quality of zoysiagrass by prompting soil productivity and nutrient availability in soil and root growth.

• The Korean Journal of Mycology
• /
• v.20 no.4
• /
• pp.324-336
• /
• 1992

On the five interspecific protoplast fusants of Ganoderma lucidum and G. applanatum was the antitumor test performed. The fusant F-2 was selected, to examine the cultured mycelia (protein bound polysaccharide) as antitumor components. When a dose of 20 mg/kg/day of each components purifed from F-2 fusant was, i.p., injected into ICR mice, the inhibition ratio of Fr. II against the solid form of sarcoma 180 increased to 1.5 times as compared with that of their parents. When Fr. II was examined for immunopotentiation activity, it increased the amount of the superoxide anion in activated macrophages to 1.2 times and the count of hemolytic plaque forming cells in the spleen to 4.3 times as compared with that of each control group. Its chemical analysis showed 85.2% polysaccharide which consisted of glucose, galactose, mannose, fucose and xylose, and 0.39% protein of 15 amino acids. The content of hexosamine was 0.39% and the molecular weight of Fr. V was $5.6{\times}10^4$ dalton.

• Korean Journal of Food Science and Technology
• /
• v.34 no.2
• /
• pp.213-219
• /
• 2002

This study was investigated cooking conditions of cooked milled rice added 5%, 7%, 9% and 11% ratios of waxy black and glutinous rices. The L value (lightness) of cooked milled rice added waxy black and glutionus rices were decreased according to increase added ratios, the a value (redness) of waxy black rice was decreased and b value (yellowness) of glutinous rice was increased while waxy black rice was decreased. In case of cooked milled rice added 9% glutinous rice, it was showed the highest values for springiness, cohesiveness, chewiness, adhesiveness and adhesiveness/hardness ratio except gumminess and hardness and all parameters of waxy black rice in texture analyser was showed the highest values at 9%, but the other parameters except cohesiveness were no significant difference at p<0.05 level. In sensory evaluation, the cooked milled rice added 9% glutinous rice was showed the highest values for flavor, clumpiness and taste and 11% glutinous rice was showed the highest values for color, glossiness, cohesiveness, hardness, adhesiveness and acceptability. Also the cooked milled rice added 9% waxy black rice was showed the highest values for cohesiveness, taste and acceptability and 11% waxy black rice was showed the highest values for flavor, color, glossiness, clumpiness, hardness and adhesiveness. Correlations between sensory parameters of cooked milled rice added waxy black rice and glutinous rice were found a significant relationship between taste and acceptability and the correlation coefficients of cooked milled rice added waxy black rice and glutinous rice were r=0.7153 and r=0.5760, respectively.

• The Korean Journal of Food And Nutrition
• /
• v.17 no.1
• /
• pp.41-46
• /
• 2004

This study was designed to investigate the effective ratio of healthy bread with jasmin tea powder. The weight, volume, and color difference of bread with various jasmin tea powder was measured and the picture of bread was taken and the panel test was taken. The weight of bread was increased and the volume was decreased significantly according to increase of jasmin tea powder. To avoid the decrease of volume, the active gluten was added, but there was not shown the increse of bread volume by active gluten. In the result of panel test and volume measurement, addition of 3% jasmin tea powder was appropriate. Therefore, using the jasmin tea powder, the diversity of bread by functionality, nutritional composition, taste, color, flavor of jasmin tea powder can be developed. This result will support the background the development of jasmin tea bread of good quality.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.6
• /
• pp.1121-1140
• /
• 1992

In metal cutting the shape of generated chip varies according to cutting conditions, characteristics of workpiece and geometry of cutting tool. The best surface roughness of machined workpiece is obtained when generating flow type contrinuous chip. If the generated chip is not broken, that is not only tangled workpiece and cutting tool, but also may give damage on the machined surface of workpiece or danger for a operator. The flow type continuous chip may bring the low productivity in high speed any heavy cutting, automatic machining process and non-human factory. There are two type of chip break process ; controlling cutting condition and using chip breaker. In present study we carried out the experiment on new type chip breaker compared with conventional type and proved the efficiency of a new type and showed the chip break condition to be applied in actual metal cutting. In the experiment SM 20 C as a workpiece material and WC as a tool material were used and cutting speed of 30-150m/min, feed of 0.071-0.210mm/rev and depth of cut of 1mm were applied as cutting condition. The results of the experiment are as follows : (1) The mechanism of chip curl can be explained more clearly by plastic flow of workpiece material and moment of shearing force. (2) The most effective radius of curled chip and flat distance from cutting edge is 2.0-2.5mm and 1.5mm in both types. (3) The effective inclination angle of chip break surface and side cutting edge angle are 30.deg.- 45.deg. and 20.deg. in conventional type, while the radius of arc surface, lower arc angle A, upper arc angle B and side cutting edge angle are 3mm, 20.deg.- 45.deg., 0.deg.- 45.deg. and 10.deg.- 20.deg. in new type. (4) The probability to be obtained 100% chip breaking ratio is much higher in new type than in conventional type.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.4
• /
• pp.575-580
• /
• 2011

Sulgidduk samples were prepared with substitutions of 5, 10, 15, and 20% Queso blanco cheese powder (QBCP) to rice flour basic formulation, along with a control, were then compared in terms of quality characteristics including moisture content, external surface appearance, color, textural characteristics, and sensory analysis, in order to determine the optimal ratio of formulation. Moisture contents were not significantly different among the Sulgidduk samples. For external surface appearance, as QBCP content increased, darkness and yellowness increased. With regard to color, lightness decreased with increasing QBCP content, while redness and yellowness increased. In terms of textural characteristics, hardness, gumminess, and springiness increased as QBCP content increased. The control group had significantly higher fracturability than the QBCP samples. Adhesiveness was highest at the 5% QBCP substitution level, while lowest at the 20% level. Cohesiveness was minimal the 10% QBCP sample, not significantly different among the QBCP samples. Chewiness and resilience were not significantly different among the QBCP samples. In sensory evaluation, color, flavor, and overall acceptability decreased, while softness not significantly different among the QBCP samples. Cheese flavor, saltness, milk fat taste, moistness and off-flavor increased with increasing QBCP content.