• Asian-Australasian Journal of Animal Sciences
• /
• 제8권2호
• /
• pp.129-133
• /
• 1995

A feeding trial was conducted to evaluate the effects of crude protein concentration (44% vs 48%) and extrusion processing of soybean meal (SBM) on the performance of weanling and growing pigs. One hundred and ninety two (96 pigs of each sex) 3 way crossed (Landrace ${\times}$ Hampshire ${\times}$ Duroc) weaned pigs were allotted to 12 pens each of 16 pigs (8 pigs of each sex). Three pens were assigned to each of the 4 treatment; $T_1$; 44% SBM diet, $T_2$; extruded 44% SBM diet, $T_3$; 48% SBM diet and $T_4$; extruded 48% SBM diet. The 44% SBM diet was formulated to have 18% CP for the starter phase (5-10 wk of age) and 15% CP for the grower phase (10-15 wk of age). The other treatments used equivalent amount of each SBM, replacing the 44% SBM. Chemical assay showed that extrusion processing generally decreased amino acid content especially total lysine and available lysine. Extrusion increased Hunterlab color +a value and decreased the urease activity index. The body weight gains for the $T_3$ and $T_4$ pigs were significantly(p < 0.05) greater than for those on $T_1$ and $T_2$ for the starter phase, but not the grower phase. Extrusion processing did not improve weight gain. Feed intake for the overall period was significantly(p < 0.05) different among treatments. The feed conversion ratios were not significantly different among treatments. An economic analysis showed that the high protein (48%) SBM diet was more cost effective than the low protein(44%) SBM diet, for the starter phase.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권4호
• /
• pp.479-485
• /
• 2012

In order to develop methods that would enlarge the feed resources in Tibet, mixtures of hulless-barley straw and tall fescue were ensiled with four levels (0, 10%, 20%, and 30% of fresh weight) of wet hulless-barley distillers' grains (WHDG). The silos were opened after 7, 14 or 30 d of ensiling, and the fermentation characteristics and nutritive quality of the silages were analyzed. WHDG addition significantly improved fermentation quality, as indicated by the faster decline of pH, rapid accumulation of lactic acid (LA) (p<0.05), and lower butyric acid content and ammonia-N/total N (p<0.05) as compared with the control. These results indicated that WHDG additions not only effectively inhibited the activity of aerobic bacteria, but also resulted in faster and greatly enhanced LA production and pH value decline, which restricted activity of undesirable bacteria, resulting in more residual water soluble carbohydrates (WSC) in the silages. The protein content of WHDG-containing silages were significantly higher (p<0.05) higher than that of the control. In conclusion, the addition of WHDG increased the fermentation and nutritive quality of straw-grass silage, and this effect was more marked when the inclusion rate of WHDG was greater than 20%.

• 센서학회지
• /
• 제13권5호
• /
• pp.356-362
• /
• 2004

In this study, we developed the measuring system based on light addressable potentiometric sensor for the quantitative analysis of penicillin that is very important element in medicine and pharmacy, clinic. It is investigated the response characteristics by enzyme reaction with penicillinase. First, the surface pre-treatment process of the $Si_{3}N_{4}$ was established. The coupling agent was made using self assembled monolayer method and it was confirmed the immobilization process by AFM. Also, as the measuring system, potentiostat, signal processing part etc. was made by Lab VIEW software, it was reduced detecting time as well as simplifying the system. Fabricated device was shown excellent pH response characteristics, 57 mV/ pH in the range of pH $2{\sim}11$. The response characteristics was 60 mV/decade in the range of $0.1{\sim}10{\;}mM$.

• 전자공학회논문지A
• /
• 제31A권2호
• /
• pp.88-93
• /
• 1994

We fabricated a large-scale photovoltaic device for detecting-3-5$\mu$m IR, by forming of n$^{+}$-p junction in the $Hg_{1-x}Cd_{x}$Te (MCT) layer which was grown by LPE on CdTe substrate. The composition x of the MCT epitaxial layer was 0.295 and the hole concentration was 1.3${\times}10^{13}/cm^{4}$. The n$^{+}$-p junction was formed by B+ implantation at 100 keV with a does 3${\times}10^{11}/cm^{2}. The n$^{+}$ region has a circular shape with 2.68mm diameter. The vacuum-evaporated ZnS with resistivity of 2${\times}10^{4}{\Omega}$cm is used as an insulating layer over the epitaxial layer. ZnS plays the role of the anti-reflection coating transmitting more than 90% of 3~5$\mu$m IR. For ohmic contacts, gole was used for p-MCT and indium was used for n$^{+}$-MCT. The fabrication took 5 photolithographic masks and all the processing temperatures of the MCT wafer were below 90$^{\circ}C$. The R,A of the fabricated devices was 7500${\Omega}cm^{2}$. The carrier lifetime of the devices was estimated 2.5ns. The junction was linearly-graded and the concentration slope was measured to be 1.7${\times}10^{17}/{\mu}m$. the normalized detectivity in 3~5$\mu$m IR was 1${\times}10^{11}cmHz^{12}$/W, which is sufficient for real application.

• Journal of Electrochemical Science and Technology
• /
• 제6권2호
• /
• pp.65-74
• /
• 2015

This work examines the characterization and corrosion behaviour of laser alloyed UNSG10150 steel with three different premixed composition Zn-Sn binary powders using a 4.4 kW continuous wave (CW) Rofin Sinar Nd:YAG laser processing system. The steel alloyed samples were cut to corrosion coupons, immersed in sulphuric acid (0.5 M H₂SO₄) solution at 30℃ using electrochemical technique and investigated for its corrosion behaviour. The morphologies and microstructures of the developed coated and uncoated samples were characterized by Optic Nikon Optical microscope (OPM) and scanning electron microscope (SEM/EDS). Moreover, X-ray diffractometer (XRD) was used to identify the phases present. An enhancement of 2.7-times the hardness of the steel substrate was achieved in sample A₁ which may be attributed to the fine microstructure, dislocations and the high degree of saturation of solid solution brought by the high scanning speed. At scanning speed of 0.8 m/min, sample A₁ exhibited the highest polarization resistance R_p (1081678 Ωcm² ), lowest corrosion current density i_corr (4.81×10⁻⁸A/cm² ), and lowest corrosion rate Cr (0.0005 mm/year) in 0.5 M H₂SO₄. The polarization resistance R_p (1081678 Ωcm² ) is 67,813-times the polarization of the UNSG10150 substrate and 99.9972% reduction in the corrosion rate.

• 대한환경공학회지
• /
• 제38권9호
• /
• pp.469-475
• /
• 2016

본 연구는 실제 운영되는 수산물 가공 산업폐수의 immersed MBR (iMBR)공정을 이용한 폐수처리시설 운영 결과에 대한 실증적 고찰을 수행한 것이다. 수산물 가공 산업의 특성상 일별, 월별 유량 변동이 심하여 유량조정조의 설계 및 운전방법이 중요하며, 유량조정조 교반시 포기식 교반을 적용하면 산발효 방지를 통하여 후속 응집/부상 공정의 약품비 절감이 가능하다. 동 현장은 유량조정조, 가압부상조, iMBR을 거쳐 방류하며, 이때 가압부상조를 거쳐 iMBR로 유입되는 BOD, $COD_{Mn}$, SS, T-N, T-P의 농도는 2,291 mg/L, 530 mg/L, 38 mg/L, 256.8 mg/L, 13.5 mg/L으로 나타났다. 수산물 가공 폐수와 같이 고농도의 염이 함유된 폐수의 생물학적 처리는 슬러지의 침강성과 관계없는 침지식 중공사막을 이용한 iMBR 공법을 적용하는것이 바람직한 것으로 나타났다. iMBR 공정의 주요 에너지 소모 요인인 공기세정에 대한 운영 값의 검토 결과 SADm값이 $0.31m^3/hr{\cdot}m^2$ membrane area이었으며, SADp값은 $26.5m^3/hr{\cdot}m^3$ permeate으로 상용화된 평막 대비 월등히 에너지 효율이 우수한 것으로 나타났다. 무산소, 혐기, 호기 탈기조로 구성된 침지식 중공사막이 결합된 iMBR 공정에서 막오염 지표인 Normalized TMP와 온도, MLSS 등을 비교 분석한 결과 F/M비가 0.08~0.10 gBOD/gMLSS에서 임계 F/M 값을 나타냈다. 생물반응조에서의 BOD, $COD_{Mn}$, SS, T-N, T-P의 처리수질은 각각 1.8 mg/L, 11.0 mg/L, 1.1 mg/L, 11.0 mg/L, 0.24 mg/L으로 운전되었으며, 제거율은 99.9%, 97.9%, 96.3%, 95.7%, 97.8%으로 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.149-152
• /
• 2001

A great deal of attention has been focused on the application of miniaturized piezoelectric transformers to the low power source for the microsystem. The dielectric and piezoelectric properties of Pb(Mn,W,Sb,Nb)O$_3$-Pb(Zr,Ti)O$_3$ ceramics have been investigated on different calcination(750$^{\circ}C$∼950$^{\circ}C$) and sintering(1100$^{\circ}C$∼1300$^{\circ}C$) temperatures. The perovskitic phase was formed by the solid phase reaction of the oxides. Anisotropic (k$\sub$t/k$\sub$p/) properties of electromechanical coupling coefficient and piezoelectric coefficient have been proven to be depending on processing temperatures. The value of electromechanical coupling factor of K$\sub$p/>0.51 and a mechanical quality factor of Q$\sub$m/>2000 were obtained. The piezoelectric transformer was prepared using this ceramics with the composition of Pb(Mn,W,Sb,Nb)O$_3$-Pb(Zr,Ti)O$_3$ We studied the influence of different processing temperature on the microstructure and piezoelectric properties of complex PZT-based ceramics. and the characteristic of piezoelectric transformer.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.205-208
• /
• 2006

Similar friction welding were produced using 15 mm diameter solid bar in Ni-base superalloy(alloy718) to investigate their mechanical properties. The main friction welding parameters were selected to endure good quality welds on the basis of visual examination, tensile tests, AE total counts and ultrasonic attenuation coefficient. The specimens were tested as welded, not heat-treated. The tensile strength of the friction welded joints was increased up to 90% of the alloy718 base metal under the condition of all heating time. Optimal welding conditions were n=2,000 (rpm), $P_1=200$ (MFa), $P_2=200$ (MFa), $t_1=8$ (s), $t_2=5$ (s) when the total upset length is 4.4(mm). The weld interface of similar friction welded steel bars was mixed strongly.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2014년도 춘계학술발표대회
• /
• pp.904-907
• /
• 2014

In this work we present a robust and fast approach to estimate 3D vehicle pose that can provide results under a specific traffic surveillance conditions. Such limitations are expressed by single fixed CCTV camera that is located relatively high above the ground, its pitch axes is parallel to the reference plane and the camera focus assumed to be known. The benefit of our framework that it does not require prior training, camera calibration and does not heavily rely on 3D model shape as most common technics do. Also it deals with a bad shape condition of the objects as we focused on low resolution surveillance scenes. Pose estimation task is presented as PnP problem to solve it we use well known "POSIT" algorithm [1]. In order to use this algorithm at least 4 non coplanar point's correspondence is required. To find such we propose a set of techniques based on model and scene geometry. Our framework can be applied in real time video sequence. Results for estimated vehicle pose are shown in real image scene.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2019년도 춘계학술발표대회
• /
• pp.23-25
• /
• 2019

낸드 플래시 메모리(NAND Flash Memory)는 컴퓨터 시스템의 대용량 저장장치를 위한 소자로써, 대용량화의 주요 원인으로는 메모리 셀(Cell) 당 저장할 수 있는 비트 수를 증가시킴으로써 집적도를 증가시킨 것이다. 그러나, 이러한 집적도의 증가는 에러의 증가를 가져와서 저장장치에서 가장 중요한 신뢰성이 급격하게 저하하는 요인이며, 저장장치의 생명주기(Lifetime)을 감소시키게 된다. 기존에 낸드 플래시 메모리 저장장치의 Lifetime을 증대시키기 위해서 P/E cycle을 고려하여 데이터 영역의 일부를 점점 더 ECC 영역으로 변경시키는 방식을 적용한 바가 있다. 이러한 방식은 데이터 영역의 감소로 인한 저장장치 내에서 관리되는 호스트-플래시 간 데이터 관리 크기의 미스매치로 인한 여러 가지 오버 헤드를 생성한다. 본 연구에서는 P/E cycle에 따른 데이터 영역의 ECC 영역으로의 전환을 통한 Lifetime을 증가시키는 방식에 있어서, 오버헤드를 줄이기 위한 캐쉬 관리 구조 및 매핑 관리 구조에 대한 설계를 진행하였다. 이러한 설계를 낸드 플래시 메모리 기반 저장장치에 적용할 경우, LifeTime을 증대시키기 위해서 ECC를 데이터 영역으로 확장하는 방식을 사용할 때 저하될 수 있는 일반 읽기 및 쓰기의 성능 저하를 어느 정도 감소시켜줄 수 있을 것으로 기대한다.