• Korean Membrane Journal
• /
• v.5 no.1
• /
• pp.10-17
• /
• 2003

1,3,5-Sustitituted polyphenylene type dendrimers were synthesized. The dendrimer was heated in cone. H$_2$SO$_4$ at 120$^{\circ}C$. The reaction mixture was precipitated to ether after simple filtration to get para-sulfonated dendrimer as the chief product. To give mechanical properties to the sulfonated dendrimer, it was partially cross-linked with phenyl ether in the medium of P$_2$O$\sub$5/ and CH$_3$SO$_3$H.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.5
• /
• pp.535-538
• /
• 1999

Five coordinated water-soluble iridium(l) complex, IrH(CO)(TPPTS)3 (1) (TPPTS = P(m-C6H4SO3Na)3-xH2O) has been prepared from the reaction of IrCl3·3H2O with TPPTS and HCHO in H2O/EtOH solution. Complex 1 catalyzes the hydration of nitrites (RC ≡ N, R = CH3, CICH2, CH3(CH2)4, Ph) in aqueous solution to give the corresponding amides (RCONH2) at 100℃. The hydration of unsaturated nitrites (R'C ≡ N, R'=CH3CH=CH, CH3OCH=CH, trans-PhCH=CH, CH2=C(CH3)) takes place regioselectively on-C ≡ N group to give unsaturated amides (R'CONH2) leaving the olefinic group intact. The yields of the amides seem to be depending on the electrophilicity of the carbon of nitrile: The more the electron withdrawing ability of the substituents on nitrites, the more amides are obtained. The hydration of dinitriles (NC-R-CN, R=(CH2)4, (CH2)6) with complex 1 initially gives mono-hydration products (NC-R-CONH2) which are slowly hydrated further to give dihydration products (H2NCO-R-CONH2). The hydration of 1,4-dicyanobutane has been found to be somewhat faster than that of 1,6-dicyanohexane.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.6
• /
• pp.622-628
• /
• 1998

Microorganisms isolated from soil were tested for their flocculating activity in kaolin suspension, Identification of the best producing CH-23 strain showed that the strain belonged to the Bacillus megaterium. The maximum production of the flocculating from Bacillus megaterium CH-23 was observed in the culture medium containing 2% sucrose, 3% NaNo3, 0.1% K2HPO4, 0.5% NaCl, 0.5% MgSO4.7H2O and 0.01% tryptone at initial pH 7.0 and 25~3$0^{\circ}C$. Flocculating activity was improved to 57% when the culture medium contained Mn2+(0.01% MnSo4). In the culture medium containing Mg2+(0.01% MgSO4.7H2O) and Ca2+(0.01% CaCO3), flocculating activity were reached to 48% and 33%, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.7
• /
• pp.634-641
• /
• 1995

The metal-carbon σ-bond cluster complexes 1-Mn(CO)5-2-R-1,2-C2B10H10 (R=CH3 Ia, C6H5 Ib) have been prepared in good yields from readily available carboranyl lithium complexes, 1-Li+-2-R-1,2-C2B10H10- (R=CH3, C6H5), by direct reaction with (CO)5MnBr. These manganese metal complexes are rapidly converted to the corresponding manganese metal carbene complexes, 1-[(CO)4Mn=C(OCH3)(CH3)]-2-R-1,2-C2B10H10 (R=CH3 IIIa, C6H5 IIIb), via alkylation with methyllithium followed by O-methylation with CF3SO3CH3. The crystal structure of IIIb was determined by X-ray diffraction. Thus, complex IIIb crystallizes in the orthorhombic space group P212121 with cell parameters a=15.5537(5), b=19.0697(5), c=7.4286(3) Å, V=2203.4(1) Å3, and Z=4. Of the reflections measured a total of 3805 unique reflections with F2>3σ(F2) was used during subsequent structure refinement. Refinement converged to R1=0.053 and R2=0.091. Structural studies showed that the manganese atom had a slightly distorted pseudo-octahedral configuration about the metal center with the carbene and ortho-carborane occupying the equatorial plane cis-orientation to each other.

• Nuclear Engineering and Technology
• /
• v.5 no.4
• /
• pp.321-333
• /
• 1973

The rates and activation parameters for the halide exchange reactions of substituted benzenesulfonylbromides (R-C$_{6}$H$_4$SO$_2$Br, R=p-MeO, p-$CH_3$, p-H, p-NO$_2$) in dry acetone at two temperatures were determined. It was found that the nucleophilicity order of Cl->I-$\geq$Br- for strong electron withdrawing-, and mild electron donating group, and of I-$\geq$Cl->Br- for strong electron donating group, Hammett plots showed slightly convoked characteristics which is similar to the plots of substituted benzenesulfonylchlorides, but contrary to the concaved nature for the halide exchange reactions of substituted benzyl chlorides. The rate of halogen exchange between benzenesulfonylbromide and lithium bromide decreased in the order of solvent : ($CH_3$)$_2$CO>$CH_3$CN》MeOH. The rates and activation parameters were also compared with those already known in the substituted benzenesulfonylchlorides. Theses were explained in terms of the structural properties of the transition state, and discussed the reaction mechanisms.s.

• Microbiology and Biotechnology Letters
• /
• v.32 no.4
• /
• pp.366-370
• /
• 2004

Four chitinase producing bacteria, Arthrobacter nicotinae CH4, Arthrobacter nicotinae CHI3, Arthrobacter sp. CH5 and Micrococcus sp. CH3, were isolated from small crabs and shrimps. We investigated the optimum medium condition for the production of enzyme and high cell mass. The preferable medium composition was as follows: colchitin 0.1 %(w/v), glycerol 0.25%(w/v) and yeast extract 0.05%(w/v) in minimal midium ($K_{2}HPO_{4}$ 0.7 g/l, $KH_{2}PO_{4}$ 0.3 g/l, $MgSO_{4}{\cdot}5H_{2}O$ 0.5 g/l, $FeSO_{4}}{\cdot}7H_{2}O$ 0.01 g/l, $ZnSO_{4}$ 0.001 g/l, $MnCI_2$ 0.001 g/l, pH 7.0). This cell culture medium could be used directly as sample for measuring chitinase activity. Because it hardly conreducing sugar such as glucose (blank value=0), the detected reducing sugar can be considered as a chitinase reaction product. The results can be used for easy preparation method for determination of enzyme activity and analysis of enzyme-substrate reaction in step of screening of chitinase producing bacteria.

• Analytical Science and Technology
• /
• v.18 no.5
• /
• pp.381-385
• /
• 2005

The title compound, $\{H_2NCH_2CH_2NH_2CH_2CH_2\}\{Cu(H_2O)_6\}(SO_4)_2$, I, has been synthesized under solvo/hydrothermal conditions and their crystal structure analyzed by X-ray single crystallography. Compound I crystallizes in the monoclinic system, $P2_1/n$ space group with a = 6.852(1), b = 10.160(2), $c=11.893(1){\AA}$, ${\beta}=92.928(8)^{\circ}$, $V=826.9(2){\AA}^3$, Z = 2, $D_x=1.815g/cm^3$, $R_1=0.031$ and ${\omega}R_2=0.084$. The crystal structure of the piperazine templated Cu(II)-sulfate demonstrate zero-dimensional compound constituted by doubly protonated piperazine cations, hexahydrated copper cations and sulfate anions. The central Cu atom has a elongated octahedral coordination geometry. The crystal structure is stabilized by three-dimensional networks of the intermolecular $O_{water}-H{\cdots}O_{sulfate}$ and $N_{pip}-H{\cdots}O_{sulfate}$ hydrogen bonds between the water molecules and sulfate anions and protonated piperazine cations. Based on the results of thermal analysis, the thermal decomposition reaction of compound I was analyzed to have three distinctive stages.

• Journal of the Korean Ceramic Society
• /
• v.43 no.4 s.287
• /
• pp.242-246
• /
• 2006

[ ${\alpha}-Al_2O_3$ ] nanopowders were fabricated by the thermal decomposition and synthetic of Ammonium Aluminum Carbonate Hydroxide (AACH). Crystallite size of 5 to 8 nm were fabricated when reaction temperature of AACH was low, $8^{\circ}C$, and the highest $[NH_4{^+}][AlO(OH)_n{(SO_4){^-}}_{3-n/2}][HCO_3]$ ionic concentration to pH of the Ammonium Hydrogen Carbonate (AHC) aqueous solution was 10. The phase transformation fem $NH_4Al(SO_4)_2$, rhombohedral $(Al_2(SO_4)_3)$, amorphous-, ${\theta}-,\;{\alpha}-Al_2O_3$ was examined at each temperature according to the AACH. A Time-Temperature-Transformation (TTT) diagram for thermal decomposition in air was determined. Homogeneous, spherical nanopowders with a particle size of 70 nm were obtained by firing the 5 to 8 m crystallites, which had been synthesized from AACH at pH 10 and $8^{\circ}C,\;at\;1150^{\circ}C$ for 3 h in air.

• Food Science and Preservation
• /
• v.14 no.2
• /
• pp.194-200
• /
• 2007

In order to enhance the functionality and storage period of traditional fermented foods, the strain CH-14, which To enhance the quality of traditional fermented foods, and to lengthen acceptable storage periods, a bacterial strain, CH-14, showing potent enzyme activities and antibacterial capabilities, was isolated and characterize4 The bacterium wn Gram-positive, catalase-positive, oxidase-negative, formed endospores, expressed flagella, was rod-shaped, and had dimensions of 0.5 0.7m and 3.5 4.2m. The bacterium CH-14 was identified as Bacillus subtilis using Bergey's Manual of Systematic Bacteriology, Bergey's Manual of Determinative Bacteriology, and an API 50 CHL Carbohydrate Test Kit. An optimum growth medium contained 2% (w/v) cellobiose as a carbon source, a mixture of 0.5% (w/v) yeast extract and 0.5% (w/v) peptone as nitrogen sources, and 0.05% (w/v) $MgSO_4{\cdot}7H_2O$. The optimal culture temperature and the optimal initial pH were in the ranges of 30 $45^{\circ}C$ and 4.5 10.0, respectively. Maximum production of the antibacterial substance occurred after 24h of culture. The minimum inhibitory concentrations of the antibacterial substance were 5mg bacterial dry weight/mL against E. coli and P. mirabilis, and 10 mg/mL against S. aureus, S. enteritidis and V. parahaemolyticus.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.6
• /
• pp.30-37
• /
• 1989

The PIN type a-SiC:H/a-Si:H heterojunction solar cells were fabricated by using the rf glow discharge decomposition of $SiH_4$ mixed with $CH_4,B_2,H_6\;and\;PH_3.$ The efficiency of the solar cell of the $SnO_2/ITO$ was higher than that of ITO transparent oxide layer by 1.5%. The P layer was prepared with the thickness of $100{\AA}$ and $CH_4/SiH_4$ ration of 5. The I layer has been deposited on the P layer and it is not pure intrinsic but near N type. So $SiH_4$ mixed with $B_2H_6$ of 0.3ppm was used to change this N type nature to intrinsic having the thickness of 5000${\AA}$. And consecutively, the N layer was deposited with t ethickness of $400{\AA}$ using $SiH_4/PH_3$ mixtures. The solar cell demonstrated 0.94V of $V_{oc'}$ 14.6mA/cm of $J_{sc}$ and 58.2% of FF, resulting the efficiency of 8.0%. To minimize loss by the reflection of light, $MgF_2$ layer was coated on the lgass and the efficiency was improved by 0.5%. Therefore, the solar cell indicated overall efficiency of 8.5%.