• Korean Chemical Engineering Research
• /
• v.59 no.3
• /
• pp.339-344
• /
• 2021

In order to improve the PEMFC (Proton Exchange Membrane Fuel Cell) durability, it is important to accurately evaluate the durability of the membrane in a short time. Recently, DOE (Department of Energy) reported a protocol that combines the chemical and mechanical durability of membranes to evaluate them effectively. This protocol applies chemical/mechanical deterioration to the membrane by repeating wet/dry while OCV (Open Circuit Voltage) holding. The problem of this protocol is that it is highly affected by electrode degradation due to change cycles in OCV and that the evaluation time is long. By using oxygen instead of air as the cathode gas while leaving the other conditions of the DOE protocol as it is, the durability evaluation time could be reduced from 408 hours to 144 hours. By reducing the number of voltage change cycles to 1/3, the electrode degradation due to the voltage change cycle was reduced to 1/12 when oxygen was used compared to air at the end, thereby enabling more accurate evaluation of polymer membrane durability.

• Journal of Microbiology
• /
• v.44 no.3
• /
• pp.269-275
• /
• 2006

Atmospheric-pressure cold plasma (APCP) using helium/oxygen was developed and tested as a suitable sterilization method in a clinical environment. The sterilizing effect of this method is not due to UV light, which is known to be the major sterilization factor of APCP, but instead results from the action of reactive oxygen radicals. Escherichia coli, Staphylococcus aureus, and Saccharomyces cerevisiae deposited on a nitrocellulose filter membrane or Bacillus subtilis spores deposited on polypropylene plates were exposed to helium/oxygen plasma generated with AC input power at 10 kHz, 6 kV. After Plasma treatment, nitrocellulose filter membranes were overlaid on fresh solid media and CFUs were counted after incubation overnight. D-values were 18 sec for E. coli, 19 sec for S. aureus, 1 min 55 sec for S. cerevisiae, and 14 min for B. subtilis spores. D-values of bacteria and yeast were dependent on the initial inoculation concentration, while the D-value of B. subtilis spores showed no correlation. When treated cells were observed with a scanning electron microscope, E. coli was more heavily damaged than S. aureus, S. cevevisiae exhibited peeling, and B. subtilis spores exhibited shrunken morphology. Results showed that APCP using helium/oxygen has many advantages as a sterilization method, especially in a clinical environment with conditions such as stable temperature, unlimited sample size, and no harmful gas production.

• Journal of the Korean institute of surface engineering
• /
• v.51 no.5
• /
• pp.332-336
• /
• 2018

Alkaline oxygen electrocatalysis, targeting anion exchange membrane alkaline-based metal-air batteries has become a subject of intensive investigation because of its advantages compared to its acidic counterparts in reaction kinetics and materials stability. However, significant breakthroughs in the design and synthesis of efficient oxygen reduction catalysts from earth-abundant elements instead of precious metals in alkaline media still remain in high demand. One of the most inexpensive alternatives is carbonaceous materials, which have attracted extensive attention either as catalyst supports or as metal-free cathode catalysts for oxygen reduction. Also, carbon composite materials have been recognized as the most promising because of their reasonable balance between catalytic activity, durability, and cost. In particular, heteroatom (e.g., N, B, S or P) doping on carbon materials can tune the electronic and geometric properties of carbon, providing more active sites and enhancing the interaction between carbon structure and active sites. Here, we focused on boron and nitrogen doped nanocarbon composit (BNC nanocarbon) catalysts synthesized by a solution plasma process using the simple precursor of pyridine and boric acid without further annealing process. Additionally, guidance for rational design and synthesis of alkaline ORR catalysts with improved activity is also presented.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.3
• /
• pp.354-361
• /
• 2022

In a direct methanol fuel cell system (DMFC), one of the drawbacks is methanol crossover. Methanol from the anode passes through the membrane and enters the cathode, causing mixed potential in the cell. Only Pt-based catalysts are capable of operating as cathode for oxygen reduction reaction (ORR) in a harsh acidic condition of DMFC. However, it causes mixed potential due to high activity toward methanol oxidation reaction of Pt. To overcome this situation, developing Pt-based catalyst that has methanol tolerance is significant, by controlling reactant adsorption or reaction kinetics. Pt/C decorated with phosphate ion was prepared by modified polyol method as cathode catalyst in DMFC. Phosphate ions, bonded to the carbon of Pt/C, surround free Pt surface and block only methanol adsorption on Pt, not oxygen. It leads to the suppression of methanol oxidation in an oxygen atmosphere, resulting in high DMFC performance compared to pristine Pt/C.

• Membrane Journal
• /
• v.14 no.3
• /
• pp.230-239
• /
• 2004

Treatment of a dyeing wastewater was carried out using polyamide RO-membranes. Before applying the wastewater to the membrane process, it was pretreated with various chemical coagulants such as alum, ferric chloride and HOC-100A. In order to see the effect of the pretreatment on the membrane separation process, the optimum conditions for the coagulation and sedimentation process were sought. As a result, by the pretreatment, for all the coagulants used, the chemical oxygen demand (COD) and UV-absorbance of the wastewater were lowered by more than 70%. The pretreated wastewater was then applied to the membrane process. The effect of the coagulants used for the pretreatment on the membrane fouling was studied. From this study, it was found that the HOC-100A was the best out of the coagulants used for the removal of the materials that could cause membrane fouling.

• Membrane Journal
• /
• v.4 no.1
• /
• pp.9-29
• /
• 1994

The development of separation technology is an important research subject as is clear from its role in the Japanese government's research and development program for basic technology for the next generation(1981~1990). Japan is poor not only in mineral resources but also in energy resources and if a sudden change occurs in oil producing facility or an accident occurs in a nuclear power plant, then energy policy must undergo changes and economic foundations may collapse. Japan has already experienced this. Although, oil prices are stable at present and Japan can import oil at low cost due to the yen appreciation, Japan needs to promote development work for any new energy crisis that may come in the future. This has been the motive for gas separation membrane development in Japan. The study of gas permeation through polymer membranes, which is the basis for membranes for gas separation, at Japanese universities began many years ago, but interest in membranes for gas separation was aroused mainly by the Government. The development of gas separation membranes in Japan started with membranes for oxygen separation on an industrial scale.

• Journal of Trauma and Injury
• /
• v.24 no.2
• /
• pp.155-158
• /
• 2011

Mechanical ventilation is usually the treatment of choice for severe respiratory failure associated with trauma. However, in case of severe hypoxia, mechanical ventilation may not be sufficient for gas exchange in lungs. Patients with Acute Respiratory Distress Syndrome (ARDS) undergo difficulties in oxygen and carbon dioxide exchange. Extracorporeal Membrane Oxygenation (ECMO) is the ideal therapeutic option for those patients with severe traumatic injuries. ECMO allows lungs to reserve their functions and decreases further lung injuries while increasing survival rate at the same time. We report two cases of patients with traumatic ARDS and Multiple Organ Failure including compromised heart function. The preservation of lung function was successful using ECMO therapy.

• Journal of Ginseng Research
• /
• v.14 no.2
• /
• pp.135-141
• /
• 1990

In order to elucidate the mechanism of the leaf-burning disease of ginseng (Panax ginseng C.A. Meyer), the relationships between thylakoid membrane peroxidation and chlorophyll bleaching were investigated in comparison with the ones of soybean (Glycine max L). When I measured the rate of lipid peroxidation in the thylakoids of ginseng and soybean by irradiation of light(60 w.m-2), it was identified that, the remarkably lower rate of lipid peroxidation was found in the ginseng thylakoid than the case of soybean. When lipid peroxidation of ginseng thylakoid was induced in the dark, chlorophyll contents of thylakoid was not changed. The results suggest that lipid peroxidation does not affect the chlorophyll bleaching in ginseng thylakoid. Thylakoid membrane peroxidation as well as chlorophyll bleaching was closely related with photosynthetic electron transport. But, according to the quenching experiment active oxygen species induced lipid peroxidation may be different species in the case of chlorophyll bleaching.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.2
• /
• pp.438-441
• /
• 2005

A mediator-less microbial fuel cell (MFC) was used to determine the performance effects of a membrane­electrode assembly (MEA). The MFC with an MEA generated a higher current with an increased coulomb yield when compared to an MFC with a separate cathode. Less oxygen was diffused through an MEA than through a Nafion membrane. The MFC performance was improved with a buffer, although a high-strength buffer reduced the performance.

• Microbiology and Biotechnology Letters
• /
• v.25 no.3
• /
• pp.240-247
• /
• 1997

Bacillary is the most common form of H. pylori observed during human infection. However, it is known that the morphology change of H. pylori from bacillary to coccoid can be occurred with a response to the environmental stresses such as the nutrient depletion, accumulation of toxic metabolites, pH alteration, and exposure to antimicrobial agents. The coccoid form of H. pylori, which is viable but non-culturable in vitro, seems to be the major cause of antibiotic resistancy and high reinfectability of H. pylori. In this regard, we studied the environmental factors that can induce the morphological change in vitro of H. pylori, and the change of fatty acid composition of plasma membrane. The morphological change from bacillary to coccoid could be observed with the depletion of nutrients, pH variation and reactive oxygen species added in the culture media. This morphologic conversion was paralleled by a dramatic decrease in unsaturated fatty acids and an increase in saturated fattv acids of plasma membrane. The change in composition of membrane fatty acid seems to be a kind of protection mechanism of H. pylori against these environmental stresses.