• Transactions of Materials Processing
• /
• v.29 no.1
• /
• pp.5-10
• /
• 2020

Heat treatment conditions of 88.5% asymmetrically cold rolled oxygen free copper (OFC) sheets have been studied to obtain an equiaxed fine microstructure with a grain size of less than 10 ㎛. The commercial OFC sheets with the thickness of 10 mm were asymmetrically cold rolled by using equal speed asymmetric rolling (ESAR) processes and total rolling reduction. The thickness of the rolled sheets were 88.5% and 1.15 mm, respectively. An equiaxed fine microstructure of OFC sheets with a grain size of 6.0 ㎛ were obtained when the asymmetrically cold rolled OFC sheets were heat treated at 180℃ for 40 minutes. The tensile strength of the asymmetrically cold rolled specimen increased from 217.6 MPa to 396.1 MPa, while the elongation of the specimen asymmetrically cold rolled and heat treated increased from 29.0% to 66.9% along with an 8% increase of the tensile strength.

• Resources Recycling
• /
• v.18 no.5
• /
• pp.12-18
• /
• 2009

The 20% Pt/C catalysts were synthesized using the chemical reduction method for polymer electrolyte fuel cell cathode and were heat-treated in the temperature range from 300 to $600^{\circ}C$. The oxygen reduction reaction of the catalysts was evaluated using the electrochemical measurement. The oxygen reduction reaction of the heat-treated Pt/C at $300^{\circ}C$ had high catalytic activity and the oxygen reduction reaction current of that was 2 times than that of non-heat treatment catalyst. It is considered that the change of the crystallinity and particle size by heat treatment could increase the catalytic activity.

• Journal of the Korean institute of surface engineering
• /
• v.33 no.2
• /
• pp.87-92
• /
• 2000

Transparent and electrical conducting tin oxide thin films were fabricated on soda lime silicate glass by thermal chemical vapour deposition technique. Thin films were deposition from mixtures of tetramethyltin (TMT) as a precursor, oxygen or oxygen containing ozone as an oxidant and 1,1,1,2-tetrafluoroethane as a doping material. Electrical properties of fabricated tin oxide films were changed depending on substrate temperature, and the amount of dopant. Resistivity of tin oxide films was reduced by doping fluorine or heat treatment. Thin films can be optimized at TMT flow rate of 8sccm, oxygen flow rate of 150sccm, 1,1,1,2-tetrafluoroethane floe rate of 300sccm and substrate temperature $380^{\circ}C$. In this conditions, the lowest resistivity of tin oxide films were $9$\times$10^{-4}$ $\Omega$cm.

• Journal of the Korean institute of surface engineering
• /
• v.44 no.3
• /
• pp.89-94
• /
• 2011

In this study, the photocurrent characteristics of plasma sprayed $TiO_2$ coatings have been investigated according to additive transition metal (Fe, Mn, Nb powder) and heat treatment conditions. The plasma sprayed $TiO_2$ coatings by heat treatment at $400^{\circ}C$ and 90 min had the higher photocurrent at ultraviolet light, no photocurrent at visible light. The photocurrent of plasma sprayed $TiO_2$ coatings added by Fe, Mn, Nb (named by plasma sprayed $TiO_2$ composite coatings) was lower than that of plasma sprayed $TiO_2$ coatings at ultraviolet light, as was low in intensity ratio of XRD(101)/(110). and the atomic percentage of oxygen by plasma sprayed $TiO_2$ composite coatings was higher than that by plasma sprayed $TiO_2$ coatings. The photocurrent of plasma sprayed $TiO_2$ composite coatings in heat treatment at $400^{\circ}C$ and 90 min was higher than that of plasma sprayed $TiO_2$ coatings in same heat treatment conditions at ultraviolet and visible light, as was high in oxygen affinity by heat treatment.

• Journal of Powder Materials
• /
• v.26 no.5
• /
• pp.421-431
• /
• 2019

In this study, the formation, microstructure, and wear properties of Colmonoy 88 (Ni-17W-15Cr-3B-4Si wt.%) + Stellite 1 (Co-32Cr-17W wt.%) coating layers fabricated by high-velocity oxygen fuel (HVOF) spraying are investigated. Colmonoy 88 and Stellite 1 powders were mixed at a ratio of 1:0 and 5:5 vol.%. HVOF sprayed self-fluxing composite coating layers were fabricated using the mixed powder feedstocks. The microstructures and wear properties of the composite coating layers are controlled via a high-frequency heat treatment. The two coating layers are composed of ${\gamma}-Ni$, $Ni_3B$, $W_2B$, and $Cr_{23}C_6$ phases. Co peaks are detected after the addition of Stellite 1 powder. Moreover, the WCrB2 hard phase is detected in all coating layers after the high-frequency heat treatment. Porosities were changed from 0.44% (Colmonoy 88) to 3.89% (Colmonoy 88 + ST#1) as the content of Stellite 1 powder increased. And porosity is denoted as 0.3% or less by inducing high-frequency heat treatment. The wear results confirm that the wear property significantly improves after the high-frequency heat treatment, because of the presence of well-controlled defects in the coating layers. The wear surfaces of the coated layers are observed and a wear mechanism for the Ni-based self-fluxing composite coating layers is proposed.

• Progress in Superconductivity
• /
• v.9 no.1
• /
• pp.115-118
• /
• 2007

This study investigated the effects of different kinds of seed crystals with miscut angles and pretreatment on the characteristics of a RE-123 superconductor processed by a top-seeded melt-growth (TSMG) method. When the seed crystal was heat-treated in an oxygen atmosphere, the surface structure was cleaned removing hydroxide. When the seed crystal had a miscut angle, in addition, the surface structure showed a well defined hill-and-valley structure after heat-treatment. A better microstructure, with a well-distributed small RE-123 phase, was obtained using a high miscut angle after heat-treatment in an oxygen atmosphere. As a result of the microstructure improvement, the magnetic characteristics also improved. The experimental result can be explained by reduction of nucleation activation energy.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.388-391
• /
• 1999

Well oriented Bi2212 superconductor thick films were formed successfully on a copper substrate by liquid reaction between a Cu-free precursor and Cu tape method in which Cu-free BSCO powder mixture was' printed on copper plate and heat-treated. And we examined the effect of heat-treatment atmosphere for the superconducting properties and microstructure of Bi2212. The composition of Cu-free BSCO powder mixture was Bi$_2O_3$ : SrCO$_3$ : CaCO$_3$ = 1.2~2 : 1 : 1 and the heat-treatment for the superconducting formation reaction was performed in air, oxygen, nitrogen and low oxygen pressure. At heat-treatment temperature, the printing layer partially melt by reacting with CuO of the oxidizing copper plate, and the nonsuperconducting phases present in the melt are typically Bi-free phases and Cu-free phases. Among the nonsuperconducting phases, it is known that the (Sr,Ca)CuO$_3$ phase restrain the formation of the Bi2212 superconducting phase. Because a kind of the nonsuperconducting phases is controled by the oxygen partial pressure, the optimum condition in which the remnants of the second phases don't leave in the fully processed conductor was determined by XRD and the critical tempera to re (Tc) analysis.

• Progress in Superconductivity
• /
• v.4 no.1
• /
• pp.90-93
• /
• 2002

The sintering process of BSCCO 2223 tapes is a complex process that is very sensitive to parameters, such as temperature, oxygen partial pressure, heating and cooling rate and holding time. During the first heat treatment, 2212 phase of precursor powder is partially transformed into 2223 phase and some residual secondary phases, such as $(Bi,Pb)_2$$Sr_2$CuO／sub y／(2201), $(Ca,Sr)_2$CuO／sub y／(2/1AEC), (Ca,Sr)／sub 14／Cu／sub 24／O／sub 41／(14／24 AEC) etc. The secondary phases are difficult to be removed from the BSCCO 2223 matrix on the heat treatment. These secondary phases degrade the critical current density. In order to minimize the amount and size of alkaline earth cuprate(AEC) particles step heat treatment is applied during the first heat treatment under the varying atmosphere. Experimental results showed that by adapting the step heat treatment process, the amount and particle size of the secondary phases in the final tapes are decreased. Consequently, the BSCCO 2223grain texture and Jc properties are improved.

• Journal of the Korean Chemical Society
• /
• v.67 no.1
• /
• pp.33-41
• /
• 2023

Nanocrystallne WO₃ and MoO₃ with several different sizes and crystal structures were prepared by simple acid precipitation and subsequent heat treatment. The photochromic (PC) properties of these samples were comparatively investigated in powder state by monitoring diffuse reflectance spectral changes after bandgap irradiation. The PC effect of hexagonal WO₃ and monoclinic WO₃ strongly depended upon crystallite size rather than crystal structure. The smaller the crystallite size, the better the PC effect. However, orthorhombic WO·H₂O and MoO₃ having hexagonal and orthorhombic structures did not follow this trend. One consistent result for all WO₃ and MoO₃ samples is that the heat treatment in air, which changes crystallinity, whether it changes the crystal structure or only the crystallite size, reduces the PC effect. Since the thermal treatment reduces the surface oxygen defect sites, we believe that the PC effect of WO₃ and MoO₃ depends critically on the surface oxygen defect sites that serve as deep trap sites for photogenerated electrons and oxygen radical holes. We also found that the proton insertion claimed by double charge injection model is not critical for the PC effect.

• Journal of Powder Materials
• /
• v.29 no.3
• /
• pp.240-246
• /
• 2022

Novel Ni- and Fe-based alloys are developed to impart improved mechanical properties and corrosion resistance. The designed alloys are manufactured as a powder and deposited on a steel substrate using a high-velocity oxygen-fuel process. The coating layer demonstrates good corrosion resistance, and the thus-formed passive film is beneficial because of the Cr contained in the alloy system. Furthermore, during low-temperature heat treatment, factors that deteriorate the properties and which may arise during high-temperature heat treatment, are avoided. For the heattreated coating layers, the hardness increases by up to 32% and the corrosion resistance improves. The influence of the heat treatment is investigated through various methods and is considered to enhance the mechanical properties and corrosion resistance of the coating layer.