• 한국재료학회지
• /
• 제12권12호
• /
• pp.941-946
• /
• 2002

Both Cu and Cu-oxide nanopowders have great potential as conductive paste, solid lubricant, effective catalysts and super conducting materials because of their unique properties compared with those of commercial micro-sized ones. In this study, Cu and Cu-oxide nanopowders were prepared by Pulsed Wire Evaporation (PWE) method which has been very useful for producing nanometer-sized metal, alloy and ceramic powders. In this process, the metal wire is explosively converted into ultrafine particles under high electric pulse current (between $10^4$ and $10^{ 6}$ $A/mm^2$) within a micro second time. To prevent full oxidations of Cu powder, the surface of powder has been slightly passivated with thin CuO layer. X-ray diffraction analysis has shown that pure Cu nanopowders were obtained at $N_2$ atmosphere. As the oxygen partial pressure increased in $N_2$ atmosphere, the gradual phase transformation occurred from Cu to $Cu_2$O and finally CuO nanopowders. The spherical Cu nanopowders had a uniform size distribution of about 100nm in diameter. The Cu-oxide nanopowders were less than 70nm with sphere-like shape and their mean particle size was 54nm. Smaller size of Cu-oxide nanopowders compared with that of the Cu nanopowders results from the secondary explosion of Cu nanopowders at oxygen atmosphere. Thin passivated oxygen layer on the Cu surface has been proved by XPS and HRPD.

• 한국포장학회지
• /
• 제9권1호
• /
• pp.33-54
• /
• 2003

The aim of this study was to develop a model that could be used in the design of modified atmosphere packaging (MAP) for peaches. Respiratory data at 5, 10, $20^{\circ}C$ for peaches were gathered and altered for create useful respiration model. Packaging materials were conventional low density polyethylene and polypropylene with anti-fog, and anti-fungi treatments, and thickness was $30{\mu}m$ and $50{\mu}m$ each. Permeability tests were performed to find their oxygen, carbon dioxide, water vapor transmission rate as increases in temperature. Test results were then converted to logarithm format for MAP modeling. The maximum rate of oxygen uptake increased with increasing temperature. Optimum gas composition in the package system for fruits were set according to literature and upper or lower limits of oxygen and dioxide established. To predict gas composition at certain storage time, weight of fruits, film thickness, film type, and other variables, respiration rate was studied at various storage conditions. The results of tests were used to calculate Cameron's model and converted to a cubic estimation equation. The validity of the model was tested experimentally by observing actual atmospheric changes inside packages. This result of study may be useful for designing dynamic gas exchange MAP systems for similar agricultural products.

• 한국표면공학회지
• /
• 제55권4호
• /
• pp.215-221
• /
• 2022

In the present work, copper oxide thin films were formed by heat-treatment method with different temperatures and atmosphere, e.g., at 200 ~ 400 ℃; in air and Ar atmosphere. The morphological, electrical and optical properties of the thermally fabricated Cu oxide films were analyzed by SEM, XRD, and UV-VIS spectrometer. Thereafter, photoelectrochemical properties of the thermal copper oxide films were analyzed under solar light (AM 1.5, 100 mW/cm²). Conclusively, the highest photocurrent was obtained with Cu₂O formed under the optimum annealing condition at 300 ℃ in air atmosphere. In addition, EIS results of Cu oxide formed in air atmosphere showed relatively low resistance and long electron life-time compared with Cu Oxide fabricated in Ar atmosphere at the same temperature. This is because heat-treatment in Ar atmosphere could not form Cu₂O due to lack of oxygen, and thermally formed CuO at high temperature suppressed stability and conductivity of the Cu oxide.

• 융합정보논문지
• /
• 제11권6호
• /
• pp.146-153
• /
• 2021

최근 페로브스카이트 반도체 물질에 대한 연구가 이루어지고 있고, 이 물질에 대한 표면 처리를 이용한 특성 평가는 후속 연구들의 기반이 된다. 따라서, 본 논문에서는 상압분위기에서 플라즈마가 형성되는 상압플라즈마 장비로 산소 플라즈마를 생성하여 공기중에 약 6개월정도 노출시킨 페로브스카이트 박막을 표면 처리한 결과에 대해 연구하였다. 6개월간 노출시킨 이유는 페로브스카이트 박막은 유기물과 무기물로 이루어져 있기 때문에 공기 중에 노출되면, 산소나 수증기와의 반응을 통해 표면이 변화된다. 따라서, 이러한 변화를 원래 막으로의 복원이 가능한지 알아보기 위함이다. 산소플라즈마 분위기에서 1초부터 1200초까지 공정 시간을 변화시켜 가면서 표면 형상과 원소들 비율을 분석하였다. 이러한 결과는 페로브스카이트 막이 시간에 따라 변화가 일어나더라도 플라즈마 처리를 통해 이를 해결하는 방안을 제공한다.

• Toxicological Research
• /
• 제6권2호
• /
• pp.143-157
• /
• 1990

Effective measure to prevent oxygen toxicity is greatly required as there increase chances to be exposed to high oxygen pressure, for example, space travel, deep sea diving and hyperbaric oxygen therapy. In the present study, in an attempt to evaluate glutathione and chlorpromazine as protective agents against oxygen toxicity, effects of the agents were tested on various toxicities (death rate, convulsion rate, time to convulsion, increase in weight of lung and brain and pathological changes in the organs) observed in rats exposed to 5 Absolute Atmosphere (ATA) of 100% oxygen for 120 minute. Glutathione reduced mortality rate and convulsion rate and also markedly suppressed the increase in lung and brain weight. The pathological changes observed in these organs were ameliorated by administration of glutathione. Chlorpromazine also reduced mortality rate but its effects appeared to be limited mainly to pulmonary toxicities. Thus glutathione seems to be more effective than chlorpromazine as a protective agent. The results obtained may support that oxygen toxicity is mediated by oxygen free radicals.

• 한국표면공학회지
• /
• 제42권5호
• /
• pp.220-226
• /
• 2009

Cr-O-N coatings having different oxygen contents were deposited on Si wafer and SUS 304 substrates by an arc ion plating technique using Cr target in $Ar/O_2/N_2$ gaseous atmosphere. As increasing oxygen content in the coating, the microstructure of Cr-O-N coating changed from polycrystalline having NaCl structure to amorphous structure. Further increase of oxygen content resulted in phase transformation from amorphous to rhombohedral structure. From the variations of d value and average grain size, it was revealed that the maximum solubility of oxygen in Cr-O-N coating was about 21 at.%. And the maximum micro-hardness of 2751HK was obtained in this composition. The lowest friction coefficient was measured in the coating having 34.8 at.% of oxygen. However, more narrow width of wear track was found in the coating having 30.1 at.% of oxygen.

• 한국재료학회지
• /
• 제16권5호
• /
• pp.323-328
• /
• 2006

In situ electrical conductivity measurements on $V_2O_5WO_3/TiO_2$ catalysts were carried out at between 100 and $300^{\circ}C$ under pure oxygen, NO and $NH_3$ to investigate the reaction mechanism for ammonia SCR (selective catalytic reduction) de NOX. The electrical conductivity of catalysts changed irregularly with supply of NO. It was, however, found that the electrical conductivity change with ammonia supply was regular and the increase of electrical conductivity was mainly caused by reduction of the labile surface oxygen. The electrical conductivity change of catalysts showed close relationship with the conversion rate of NOx. Variation of conversion rate in atmosphere without gaseous oxygen also showed that labile lattice oxygen is indispensable in the initial stage of the de NOx reaction. These results suggest that liable lattice oxygen acts decisive role in the de NOx mechanism. They also support that de NOx reaction occurs through the Eley?Rideal type mechanism. The amount of labile oxygen can be estimated from the measurement of electrical conductivity change for catalysts with ammonia supply. This suggests that measurement of the change can be used as a measure of the de NOx performance.

• 전기의세계
• /
• 제22권3호
• /
• pp.7-12
• /
• 1973

Single crystals of BaTiO$_{3}$ which were grown by Remeika's method were on reducing them is hydrogen atmosphere at about 400-1000.deg. C for about 30hrs. They became light brown and seems to have an effect on their properties by oxygen deffects especially at a Curie temperature of 122.deg. C exhibitted abnormal reducting resistivity. These semiconducting tendency were studied experimentally by observing through several electrical properties and were discussed on the basis of exchange semiconductor mechanism.

• 한국분말재료학회지
• /
• 제24권5호
• /
• pp.357-363
• /
• 2017

In this study, Bi-Sb-Te thermoelectric materials are produced by mechanical alloying (MA) and spark plasma sintering (SPS). To examine the influence of the milling atmosphere on the microstructure and thermo-electric (TE) properties, a p-type Bi-Sb-Te composite powder is mechanically alloyed in the presence of argon and air atmospheres. The oxygen content increases to 55% when the powder is milled in the air atmosphere, compared with argon. All grains are similar in size and uniformly, distributed in both atmospheric sintered samples. The Seebeck coefficient is higher, while the electrical conductivity is lower in the MA (Air) sample due to a low carrier concentration compared to the MA (Ar) sintered sample. The maximum figure of merit (ZT) is 0.91 and 0.82 at 350 K for the MA (Ar) and MA (Air) sintered samples, respectively. The slight enhancement in the ZT value is due to the decrease in the oxygen content during the MA (Ar) process. Moreover, the combination of mechanical alloying and SPS process shows a higher hardness and density values for the sintered samples.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.451-454
• /
• 2001

The ionic conductivity of cubic solid solutions in the system $Y_{2}O_{3}-ZrO_{2}$ prepared by SHS was examined. Conductivity-temperature data obtained at $1000^{\circ}C$ in atmosphere of low oxygen partial pressure ($10^{-40}$ atm) for $Y_{2}O_{3}-ZrO_{2}$ cubic solid solutions indicated that these materials could be reduced, the degree of reduction being related to the measuring electric field. At low impressed fields no reduction was observed. Thus, these conductivity data give a transference number for the oxygen ion in $Y_{2}O_{3}-ZrO_{2}$ cubic solid solutions greater than 0.99.