• Journal of Life Science
• /
• v.8 no.2
• /
• pp.216-225
• /
• 1998

Metal ion-induced and it’s regulatory genes were screened in virulent salmonella typhimurium UK1 and tested cross-regulation with various stresses. Using the techniqud of P22-MudJ(Km, lacZ)-directed lacZ operon fusion, LF40 cuiA::MudJ and Lf153 cuiD::MudJ which were induced by copper were selected. cuia and cuiD were determined anaerobic coper inducible and copper tolerance response gene, respectively. Also cuiA and cuiD locus were determined at 81 and 8min, respectively, on salmonella Genetic Map. The two regulators were identified as cuaR, and cudR, which controls cuiA and cuiD, respectively. cuaR, and cudR appeared as negative regulators because the expression of cuiA-lac-Z and cuiD-lacZ were increased. Copper adapted UK1 showed high resistance to H$_{2}$O$_{2}$, but cuiD did not. The product of the cudR locus was responsible for decreasing the tolerance to copper and H$_{2}$O$_{2}$. Furthemore cuiA and cuiD locus were found to be part of a regulon under the control of a trans-acting regulators, rpoS, oxyR and relA. Therefore, the results suggest CTR participate with oxidative stress on Salmonella.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.2
• /
• pp.205-210
• /
• 2007

In this paper, we describe a study on the relationship between neutral emulsion manufacture and hardening test of films. The hardeners were prepared by condensation of equimolar amounts of trichlorotriazine with benzene- or naphthalene-based amino or oxy acids at 0 to $5^{\circ}C$ and at pH 7, and used as hardening agents for gelatin. The hardening test of neutral emulsion layers was studied at pH 7.0. For example I(R=ONa) had strong hardening properties, I substituted with an aminobenzosulfonate moiety $(R=NHC_6H_4-p-SO_3Me$ where Me = K, Na) was a much weaker gelatin hardener, and when substituted with amino- or oxynaphthalene derivative (II, III) did not harden gelatin at all. Compound with 2 dichlorotriazine groups as IV exhibited hardening properties. The hardener can be used in neutral emulsion layer of film and showed good hardening effect.

• The Journal of Information Technology
• /
• v.10 no.2
• /
• pp.29-35
• /
• 2007

In this paper, we describe a study on the relationship between alkaline magenta emulsion manufacture and hardening test of films. The hardeners were prepared by condensation of equimolar amounts of trichlorotriazine with benzene-or naphthalene-based amino or oxy acids at 0 to $5^{\circ}C$ and at pH 7, and used as hardening agents for gelatin. The hardening test of alkaline magenta emulsion was studied at pH 8.5. For example I(R=ONa) had strong hardening properties, I substituted with an aminobenzosulfonate moiety (R=NHC6H4-p-SO3Me where Me = K, Na) was a much weaker gelatin hardener, and when substituted with amino- or oxynaphthalene derivative (II, III) did not harden gelatin at all. Compound with 2 dichlorotriazine groups as IV exhibited hardening properties. The hardener can be used in alkaline magenta emulsion layer of film and showed good hardening effect.

• Korean Journal of Crystallography
• /
• v.9 no.2
• /
• pp.114-119
• /
• 1998

Imperatorin, 9-[(3-methyl-2-butenyl)oxy]-7H-furo[3,2-g][1]benzopyran-7-one의 분자 및 결정구조를 X-선 회절법으로 연구하였다. 이 결정의 분자식은 C16H14O4, 결정계는 삼사정계이고 공간군은 P이다. 단위포상수는 a=11.818(1) , b=11.906(1) , c=11.059(1) 이며, α=96.32(1)o, β=90.74(1)o, γ=64.88(1)o, V=13.993(2) 3, T=293 K, Z=4이다. 구조해석에 사용한 X-선은 CuKα선(λ=1.5418 )을 사용하였다. 구조는 직접법으로 풀었으며 최소자승법으로 정밀화하였다. 최종 신뢰도 R 값은 F0>4σ(F0)인 3951개의 독립회절데이타로 356개 파라메타에 대해 R=7.02%이다.

• Plant Journal
• /
• v.6 no.3
• /
• pp.46-52
• /
• 2010

This study investigated the coating failure of the blades of booster fans for the 200 MW flue gas desulfurization plant. Although the arc sprayed SM8222 have been tried as blade coating materials aimed to apply as alternatives of Metcoloy(R)2 due to better corrosion-erosion resistance but it is failed. Bond strength tests and practical field experiences have demonstrated high velocity oxy-fuel(HVOF) coating method with Diamalloy 3004 as an alternative to Metcoloy(R) 2 arc spray.

• The Journal of Information Technology
• /
• v.9 no.1
• /
• pp.1-7
• /
• 2006

In this paper, we describe a study on the relationship between photographic emulsion manufacture and hardening test of films. The hardeners were prepared by condensation of equimolar amounts of trichlorotriazine with benzene- or naphthalene-based amino or oxy acids at 0 to 5$^{\circ}C$ and at pH 7, and used as hardening agents for gelatin. The hardening test of photographic emulsion was studied at pH 5.5. For example I(R=ONa) had strong hardening properties, I substituted with an aminobenzosulfonate moiety (R=$NHC_6H_4-p-SO_3Me$ where Me = K, Na) was a much weaker gelatin hardener, and when substituted with amino- or oxynaphthalene derivative (II, III) did not harden gelatin at all. Compound with 2 dichlorotriazine groups as IV exhibited strong hardening properties. The hardener can be used in photographic emulsion of film and showed very good hardening effect.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.1
• /
• pp.89-94
• /
• 2018

In this study, water-dispersed biocellulose nanofibers (TC) were prepared via an oxidation reaction using 2,2,6,6-tetramethyl-1-piperidine-N-oxy radical (TEMPO) as a catalyst. The TC retained their unique structure in water as well as in emulsion. TC adhered to the skin surface while maintaining nanofibrous structures, providing inherent functions of biocellulose, such as high tensile strength and high water-holding capacity. When gelatin gels as model skin were coated with TC, the hardness representing the elasticity was increased by 20% compared to untreated gelatin gel because TC could tightly hold the gelatin structure. When porcine skin was treated with TC and TC-contained O/W emulsion, the initial water contact angles of TC were lower than other materials, and dramatically decreased over time as water penetrated the fibrous structure of the TC film. Characterization of TC on the skin surface offered insight into the function of nanofibers on the skin, which is important for their applications with respect to fiber-cosmetics.

• Korean Journal of Crystallography
• /
• v.3 no.1
• /
• pp.31-36
• /
• 1992

6, 9-Difluoro-11, 21-dihydroxyl-16, 17-[(1methylehtylidene)bis(oxy)]-pregna-1, 4-diene-3, 20-dione (fluorocinolone acetonide) , C24H3OF106, trigonal, R3 (defined as a hexagonal lattice), a =b = 17.896 k, c: 18.365 k, V=5094.3 A', Z=9, 1 (MoK a) =0.7107 A, D=1.31 g/cm3, D.: 1.328 g/cm3 T=298 K, final R=0.050 for 1101 unique observed reflections. The molecule has conformational features in common with other corticosteroids. Three molecules related by 3-fold symmetry are involved in hydrogen bonding, forming a layer of molecules perpendicular to the c-axis.

• Journal of Applied Biological Chemistry
• /
• v.53 no.4
• /
• pp.225-231
• /
• 2010

To understand the inhibitory activity with changing hydroxyl substituents ($R_l-R_9$) of polyhydroxy substituted 2-phenyl-l,4-benzopyrone analogues (1-25) against tyrosinase (PDB ID: oxy-form; 1WX2), molecular docking and the three dimensional quantitative structure-activity relationships (3D-QSARs: Comparative molecular field analysis (CoMFA) & Comparative molecular similarity indices analysis (CoMSIA)) were studied quantitatively. The statistically best models were CoMFA 1 and CoMSIA 1 model from the results. The optimized CoMSIA 1 model with the sensitivity of the perturbation and the prediction produced ($dq^2'/dr_{yy'}^2$=1.009 & $q^2$=0.51l) by a progressive scrambling analysis were not dependent on chance correlation. The inhibitory activities with optimized CoMSIA 1 model were dependent upon electrostatic factor (51.4%) of substrate molecules. Contour mapping the 3D-QSAR models to the active site of tyrosinase provides new insight into the interaction between tyrosinase as receptor and 2-phenyl-l,4-benzopyrone analogues as inhibitor. Therefore, the results will he able to apply to the optimization of a new potent tyrosinase inhibitors.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.6
• /
• pp.888-895
• /
• 2020

Ulmus genus has excellent various physiological activities, including anti-ulcer, antioxidant, antibacterial, anti-cancer, immunity, and homeostasis maintenance effects, and it is known to have many additional drug effects And one of reasons for these excellentbiological activities is a flavan-3-ol chemical group in Ulmus genus. In this study a new flavan-3-ol compound was identified in Ulmus davidiana var. japonica. A flavan-3-ol,(2R,3S)-7-[(2S,3R,4R)-3,4-dihydroxy-4-(hydroxymethyl)oxolan-2-yl]oxy-2-(3,4-dihydroxyphenyl)-3,4-dihydro-2H-chromene-3,5-diol, named as catechin 7-O-beta-D apiofuranoside, was isolated from the stems and barks of Ulmus davidiana var. japonica for. suberosa, which is a species belonging to the genus Ulmus, growing throughout the Korea peninsula. The structure was elucidated by various spectroscopic methods including high-resolution TOF mass spectrometry, ¹H-NMR and ¹³C-NMR spectrometry and comparison with chemical structures of defined compounds.