• Journal of the Semiconductor & Display Technology
• /
• v.17 no.2
• /
• pp.71-75
• /
• 2018

In this study, we prepared OLED cell with ITO (Indium Tin Oxide) films grown on the glass substrate by facing targets sputtering. Before fabrication of OLED cells, we investigated properties of ITO films deposited at various sputtering conditions. To investigate properties of as-prepared films, we employed four-point probe, UV-VIS spectrometer, X-ray diffractometer (XRD), field emission scanning electron microscopy (FE-SEM), hall-effect measurement. As a results, as-prepared ITO films have high transmittance of over 85 % in the visible range (300-800 nm) and a resistivity of under $10^{-4}$ (${\Omega}-cm$). Their resistivity increased as a function of oxygen gas flow and substrate temperature. OLED cell with ITO films were fabricated by thermal evpoeartor. Properties of OLEDs cell referring to properties of ITO films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.260-261
• /
• 2008

In this study, we investigated the properties of Indium Zinc Oxide (IZO) films prepared in facing targets sputtering (FTS) system at room temperature as function of oxygen contents. As as-deposited films were rapidly thermal annealing on air atmosphere of $400^{\circ}C$ for 30s. As a result, the transmittance of IZO films increased with increasing oxygen flow in the visible range. After rapidly thermal annealing to films, the optical properties of films improved than films deposited at R.T, but the electrical properties decreased. Before RTA treatment, the lowest resistivity IZO is $5.4\times10^{-4}[\Omega{\cdot}cm]$ at oxygen gas flow. But, after RTA treatment, IZO films have the value of lowest resistivity at the lower oxygen gas ratio in compare with before RTA treatment. The resistivity of IZO films is $7.29\times10^{-4}[\Omega{\cdot}cm]$ at pure argon atmosphere.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.159-159
• /
• 2008

Indium-tin oxides (ITO) films have been widely used as transparent electrodes for optoelectronic devices such as organic light emitting diodes (OLEDs), photovoltaics, touch screen devices, and flat-paneldisplay. In particular, to improve hole injection efficiency in OLEDs, transparent electrodes should have high work-function besides their transparency and low resistivity. Nevertheless, few studies have been made on engineering the work function of ITO for use as an efficient anode. In this study, the effects of a wide range of Nb or Zn doping rate on the changes in work functions of ITO anode were investigated. The Nb or Zn doped ITO films were fabricated on glass substrates using combinatorial sputtering system which yields a linear composition spread of Nb or Zn concentration in ITO films in a controlled manner by co-sputtering two targets of ITO and Nb2O5 or ITO and ZnO. We have also examined the resistivity, transmittance, and other structural properties of the Nb or Zn-doped ITO films. Furthermore, OLEDs employing Nb or Zn-doped ITO anodes were fabricated and the device performances were investigated concerned with the work function changes.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.115-121
• /
• 2013

We fabricated thin film transistors (TFTs) using TiInZnO(TiIZO) thin films as active channel layer. The thin films of TiIZO were deposited at room temperature by RF-magnetron co-sputtering system from InZnO(IZO) and Ti targets. We examined the effects of titanium addition by X-ray diffraction, X-ray photoelectron spectroscopy and the electrical characteristics of the TFTs. The TiIZO TFTs were investigated according to the radio-frequency power applied to the Ti target. We found that the transistor on-off currents were greatly influenced by the composition of titanium addition, which suppressed the formation of oxygen vacancies, because of the stronger oxidation tendency of Ti relative to that of Zn or In. A optimized TiIZO TFT with rf power 40W of Ti target showed good performance with an on/off current ratio greater than $10^5$, a field-effect mobility of 2.09 [$cm^2/V{\cdot}s$], a threshold voltage of 2.2 [V] and a subthreshold swing of 0.492 [V/dec.].

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1618-1620
• /
• 1996

A variety of processing techniques have been reported for preparing high quality functional thin films, and one of the most successful techniques has been known to be the rf FTMS(facing targets magnetron sputtering) method. The rf FTMS has preferable advantages to reduce the resputtering effect when depositing thin films and efficiently to oxidize the grown films by oxygen radicals. The resulting optimum conditions were found to be the rf power 50 W and the substrate position of 20 mm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.547-550
• /
• 2004

Indium tin oxide(ITO) films were prepared as a function of varying the proportion of oxygen$[0{\sim}1.0sccm]$ at fixed he gas[20sccm] by facing targets sputtering(FTS) system. Then electrical and optical properties of ITO thin films were estimated by Hall effect measurement system and UV/VIS-spectrometer. In the result, at very little oxygen rate, we can prepare a low resistivity ITO thin film of $3.40{\times}10^{-4}[\Omega{\cdot}cm]$ and transmittance of over 80%. So we noticed that the ITO thin film with low resistivity and high transmittance was prepared by FTS at room temperature.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.5
• /
• pp.294-300
• /
• 2017

$TeO_x$ thin films were deposited at various $O_2$/Ar gas-flow ratios by a reactive RFmagneton sputtering technique from $TeO_2$ and Te targets. X-ray diffraction (XRD) results revealed that the $TeO_x$ thin films were amorphous. The structure and chemical composition of the $TeO_x$ thin films were investigated by fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The optical characteristics of the $TeO_x$ thin films were investigated by an Ellipsometer and a UV-VIS-NIR spectrophotometer. According to the $O_2$/Ar gas-flow ratios, the atomic composition ratio of $TeO_x$ thin films was divided into two regions(x=1-2, 2-3). Different optical characteristics were shown in each region. With an increasing $O_2$/Ar gas-flow ratio, the refractive index of the $TeO_x$ thin films decreased and the optical bandgap of the films increased.

• Korean Journal of Materials Research
• /
• v.12 no.6
• /
• pp.464-469
• /
• 2002

$SrBi_2Nb_2O_9(SBN)$ thin films were grown on Pt/Ti/Si and p-type Si(100) substrates by rf-magnetron co-sputtering method using two ceramic targets, $SrNb_2O_6\; and \;Bi_2O_3$. The structural and electrical characteristics have been investigated to confirm the possibility of the SBN thin films for the applications to destructive and nondestructive read out ferroelectric random access memory(FRAM). For the optimum growth condition X-ray diffraction patterns showed that SBN films had well crystallized Bi-layered perovskite structure after $700^{\circ}C$ heat-treatment in furnace. From this specimen we got remnant polarization $(2P_r)$ of about 6 uC/$\textrm{cm}^2$ and coercive voltage $(V_c)$ of about 1.5 V at an applied voltage of 5 V. The leakage current density was $7.6{\times}10^{-7}$/A/$\textrm{cm}^2$ at an applied voltage of 5V. And for the NDRO-FRAM application, properties of SBN films on Si substrate has been investigated. From transmission electron microscopy (TEM) analysis, we found the furnace treated sample had a native oxide about 2 times thicker than the RTA treated sample and this thick native oxide layer had a bad effect on C-V characteristics of SBN/Si thin film. After $650^{\circ}C$ RTA process, we got the improved memory window of 1.3 V at an applied voltage of 5 V.

• Journal of the Korean Vacuum Society
• /
• v.17 no.1
• /
• pp.73-79
• /
• 2008

In order to apply for transparent conductive oxide(TCO), we deposited ZnO thin films on the glass at room temperature by RF magnetron sputtering method. Deposition conditions for high transmittance and low resistivity were optimized in our previous studies. Under the deposition condition with the RF power of 200 W, target to substrate distance of 30 mm and working pressure of 5 mTorr, highly conductive($7.4{\times}10^{-3}{\Omega}cm$) and transparent(over 85%) ZnO films were prepared. Highly oriented ZnO film in the [002] direction were obtained with specifically designed ZnO targets. Systematic study on dependence of deposition parameters on electrical and optical properties of the as-grown ZnO films were mainly investigated in this work. And for application tests using these films as transparent conductive oxide anodes, wet chemical etching behaviors of ZnO films were also investigated using various chemicals. Wet-chemical etching behavior of ZnO films were investigated using various acid solutions. The concentrations of these different acid solutions were controlled to study the etching shapes and etching rate. ZnO films were anisotropically etched at various concentrations and wet etching led to crater-like surface structure. Also we firstly found that the etching rate and etching shapes of ZnO films strongly depended on the etchant concentrations (i.e. pH) and the etching rate is exponentially decreased with increasing pH values regardless of the acid etchants.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.5
• /
• pp.208-213
• /
• 2020

In this research, design optimization was investigated using the finite element analysis and the optimal design technique based on the PQRSM algorithm to minimize the thermal deformation of IGZO oxide in a target module in which IGZO oxide and a copper backplate are bonded to each other. In order to apply the optimal design technique in conjunction with finite element analysis, the x-coordinate of lower supports and upper fixed boards used as design valuables, and the optimal design was performed to minimize the thermal displacement of IGZO materials as the objective function. After the optimization process, the thermal displacement within IGZO oxide could be reduced to 42 % comparing with the initial model. The result is thought to be useful in the industry as it can reduce the thermal deformation of target oxides materials only by changing the position of the subsidiary materials during the bonding process.