• 대한화학회지
• /
• 제29권2호
• /
• pp.172-177
• /
• 1985

안티몬이 첨가된 산화주석 얇은막 전극의 반도체적 성질을 조사하고 이산화황의 산화반응에 대한 이 전극의 전기화학적 촉매작용을 여러가지 조건하에서 조사하였다. $SO_2$(또는 아황산염)를 포함하는 전해질 용액의 pH가 증가함에 따라 점차로 낮은 전위에서 산화가 일어났으며 이 전극은 염기성 용액에서 $SO_3^=$의 산화에 대하여 뚜렷한 전기촉매 작용을 나타내었으며 이 전기촉매 작용은 백금이나 팔라듐 전극의 촉매작용과는 다른 특성을 보여주었다. 백금이나 팔라듐이 이 전극에 첨가된 경우에는 이들 금속이 전극표면에 노출된 양에 비례하는 효과만이 나타났다.

• 한국세라믹학회지
• /
• 제37권3호
• /
• pp.263-270
• /
• 2000

The Pt/copper oxide/n-Si electrodes were fabricated by depositing copper oxide thin film of 500${\AA}$ and very thin Pt layer on the n-type (100) Si substrate. hotoelectrochemical properties and stability profiles of the electrodes were investigated as a function of deposition time of Pt layer. As the deposition time of Pt layer increased up to 10 seconds, the photocurrent and quantum efficiency were increased and then decreased with further depositing time. The better cell stability was observed for the electrode with longer deposition time. The improvements in above photoelectrochemical properties indicate that Pt layer acts as a catalyst layer at electrode/electrolyte interface as well as a protective layer. The decreasing tendency of the photocurrent and efficiency for the electrode with Pt layer deposited above 20 seconds was explained as an increases in probbility of electron-hole pair recombination and also the absorbing photon loss at electrode surface due to the excessive thickness of Pt layer. The results were confirmed by impedance spectroscopy, mutiple cycle voltammograms and microstructural analyses.

• 한국응용과학기술학회지
• /
• 제35권4호
• /
• pp.1088-1095
• /
• 2018

본 연구에서는 탄소 나노재료 중 환원된 그래핀 옥사이드와 전도성 고분자중 폴리아닐린을 복합화 하여 슈퍼커패시터용 전극을 제조하였으며, 각각의 전극 재료가 가지는 단점을 서로 보완하고 장점을 극대화시킴으로써 전극의 전기화학적 특성을 크게 향상 시킬 수 있었다. 전극 물질에 사용된 폴리아닐린은 아닐린 단량체를 화학 중합법으로 제조하였고, 환원된 그래핀 옥사이드는 별도의 전 처리 과정 없이 사용하였으며, DMF(N,N-dimethyl formamide)를 용매로 도입하여 분산용액을 제조하였다. 분산용액은 금이 코팅된PET(Polyethylene terephthalate) 기판위에 산업적 스케일로 적용이 가능한 스프레이 코팅 방법을 이용하여 전극으로 제조하였다. 환원된 그래핀 옥사이드/폴리아닐린 복합재료를 기반으로 제조된 전극의 전기화학적 특성을 비교하기 위하여 환원된 그래핀 옥사이드와 폴리아닐린 단일 전극을 제조하였으며, 동일한 조건하에서 순환전압전류법, 임피던스 분광법, 정전류 충 방전법을 통하여 각각의 전극이 나타내는 전기화학적 특성을 비교 분석 하였다. 그 결과로, 환원된 그래핀 옥사이드/폴리아닐린 복합재료를 기반으로 제조된 전극은 폴리아닐린, 환원된 그래핀 옥사 단일 전극에 비하여 전기 용량 값이 높게 나타났으며, 전해질 계면과의 내부 저항은 폴리아닐린, 환원된 그래핀 옥사이드 단일 전극에 비하여 각각 24 %, 58 % 감소하는 결과를 나타내었다. 이러한 결과로 미루어보아 본 연구를 통하여 제조된 환원된 그래핀 옥사이드/폴리아닐린 복합재료 기반의 전극은 유연성 에너지 저장 매체나 웨어러블 전자기기에 적용이 가능할 것으로 판단된다.

• 한국수소및신에너지학회논문집
• /
• 제28권2호
• /
• pp.206-211
• /
• 2017

Carbon felt electrode for the vanadium redox-flow battery (VRFB) has been studied to see the effect of grephene oxide (GO) treatment on the surface of the carbon felt electrode. In this paper, surface of carbon felt electrodes were treated with various concentrations of grephene oxide. Electrochemical analysis, cyclic voltammetry (CV), was performed to investigate redox characteristics as electrode for VRFB. Also the effect of GO on the introduction of functional group on the surface of carbon felt electrodes were investigated using X-ray photoelectron spectroscopy (XPS), which discovered increase in the overall functional group content on the surface of carbon felts.

• Corrosion Science and Technology
• /
• 제6권2호
• /
• pp.44-49
• /
• 2007

Dimensionally stable anodes have been widely used to cathodically protect the metallic materials in corrosive environments including concrete structure as the insoluble anode. Lifespan of the anode for concrete construction can be determined by NACE TM0294-94 method. Lifespan of conductive oxide electrode would be affected by thermal treatment condition in the process of sol-gel coatings. This work aims to evaluate the effect of thermal treatment temperature on the lifespan of the $RuO_{2}$ electrode. $450^{\circ}C$ treated conductive oxide electrode showed the excellent properties and its lifespan was evaluated to be over 88 years in 3% NaCl, 4% NaOH, and simulated pore water. This behavior was related to the formation of $RuO_{2}$.

• 한국표면공학회지
• /
• 제40권5호
• /
• pp.203-208
• /
• 2007

Preliminary studies were conducted to develop a dimensionally stable anode (DSA)electrode prepared by reactive sputtering method. The microstructure, surface morphology and electrochemical properties of iridium oxide $(IrO_2)$ coatings synthesized by unbalanced magnetron sputtering (UBMS) and conventional DSA electrode were compared. In addition, the possibilities of $IrO_2$ films synthesized by UMB on a real DSA electrode were investigated by electro-chemical application test. The degree of non-stoichiometry and surface area were closely related to the electro-chemical activity of the $IrO_2$ electrode. The feasibility of making a DSA electrode prepared by PVD technique was demonstrated through the present work.

• 한국세라믹학회지
• /
• 제45권6호
• /
• pp.368-373
• /
• 2008

An electrode for supercapacitor using 3-dimensional porous nickel foam as a current collector and cobalt oxide as an active material was prepared and characterized in terms of morphology observation, crystalline property analysis, and the investigation of electrochemical property. The electrode surface showed that the cobalt oxide was homogeneously coated as the crystalline phase of $Co_3O_4$. Cyclic voltammetry for the $Co_3O_4$/nickel foam electrode exhibited higher specific capacitance values (445 F/g at 10 mV/s and 350 F/g at 200 mV/s) and excellent capacitance retention ratio (99% after $10^4$ cycles). It was proved that the nickel foam substrate played the roles in reducing the interfacial resistance with cobalt oxide and in improving the electrode density by embedding greater amount of cobalt oxide within it.

• Bulletin of the Korean Chemical Society
• /
• 제33권12호
• /
• pp.3993-3997
• /
• 2012

Three-dimensional porous nickel foam was used as a current collector to prepare a Co-Ni oxide/Ni foam electrode for a supercapacitor. The synthesized Co-Ni oxide was proven to consist of mixed oxide phases of $Co_3O_4$ and NiO. The Co-Ni oxide/Ni foam electrode prepared was characterized by morphological observation, crystalline property analysis, cyclic voltammetry, and impedance spectroscopy. Cyclic voltammetry for the electrode showed high specific capacitances, such as 936 F $g^{-1}$ at 5 mV $s^{-1}$ and 566 F $g^{-1}$ at 200 mV $s^{-1}$, and a comparatively good cycle performance. These improved results were mainly due to the dimensional stability of the nickel foam and its high electrical contact between the electrode material and the current collector substrate.

• 한국세라믹학회지
• /
• 제45권8호
• /
• pp.482-485
• /
• 2008

Composite electrode consisting of carbon nanofiber (CNF) and cobalt oxide was prepared for supercapacitor electrode, and its electrochemical property was investigated by means of cyclic voltammetry. Cyclic voltammetric results for the composite electrode showed it had specific capacitance value of 420 F/g at 5 mV/s, which was higher than capacitance value of 180 F/g for the bare CNF. It is concluded that the capacitive property of CNF can be improved by coating cobalt oxide on it to increase the surface area of cobalt oxide.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.191-193
• /
• 2005

This study has investigated the effects of the etching method of a Ti substrate for a metal oxide electrode on the electrochemical characteristics of the electrode. The HCl etching develops a fine and homogeneous roughness on the Ti substrate. Fabrication and material properties of the catalytic oxide electrode, which is known to be so effective to destruct refractory organics in aqueous waste, were studied. A method to enhance the fabrication reproducibility of the oxide electrode was tested for Ru, Zr, Sn oxide on the Ti substrate using SEM, XRD, Cyclic voltammetry.