• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.4
• /
• pp.39-46
• /
• 2017

This paper presents the fabrication of ceramic insulation layer on metallic heat spreading substrate, i.e. an insulated metal substrate, for planar type heater. Aluminum alloy substrate is preferred as a heat spreading panel due to its high thermal conductivity, machinability and the light weight for the planar type heater which is used at the thermal treatment process of semiconductor device and display component manufacturing. An insulating layer made of ceramic dielectric film that is stable at high temperature has to be coated on the metallic substrate to form a heating element circuit. Two technical issues are raised at the forming of ceramic insulation layer on the metallic substrate; one is delamination and crack between metal and ceramic interface due to their large differences in thermal expansion coefficient, and the other is electrical breakdown due to intrinsic weakness in dielectric or structural defects. In this work, to overcome those problem, selected metal oxide buffer layers were introduced between metal and ceramic layer for mechanical matching, enhancing the adhesion strength, and multi-coating method was applied to improve the film quality and the dielectric breakdown property.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.11 no.1
• /
• pp.130-152
• /
• 1989

The purpose of this study was to observe the effect of intermaxillary fixation on the chondrocytes of the mandibular condyle under the light and the electron microscope. For this study, twenty rabbits were placed in maxillomandibular fixation, and two were used as a control group. The experimental group was subdivided into 3, 7, 14, 21 and 28 day group. After the experimental period of 3, 7, 14, 21 and 28 days, the animals were sacrificed with a vascular perfusion of 2.5% glutaraldehyde. The condylar processes were exenterated, and decalcified in 0.1M EDTA with 2.5% glutaraldehyde solution for two weeks. The specimens were rinsed with phosphate buffer solution and the post-fixation was carried out with 2% osmium tetroxide at $4^{\circ}C$ for two hours. Thereafter the specimens were dehydrated in alcohol series, cleared with propylene oxide and embedded in Epon 812 resin. Thin sections and ultra-thin sections were made, and the cellular structures of the condylar cartilages were observed with light and electron microscope. The results were as follows: 1. In the intermaxillary fixation group, the cartilaginous tissues of mandibular condyles showed a marked decrease in the thickness compared to the control group. 2. A remarkable change was noticed in the proliferating and the hypertrophic zone of the condylar cartilages in the experimental group. 3. An atrophic change of the condylar cartilage was appeared in the 3 day experimental group and degenerative change was observed in the 7 day experimental group, and recovery was seen in thereafter 14 day experimental group. 4. Calcification, degeneration and resorption of condylar cartilage were recognizable, and the cellular zone of the condylar cartilage was appeared indistinctly in 3 day and 7 day experimental group. The chondroblasts, however, were differentiated into chondrocytes and resumed mitosis, and then the cellular zones of the condylar cartilage were reorganized from the 14 day experimental group under the findings of light microscope. 5. Under the findings of electron microscope, atrophic changes and decrease in number of intracellular organelles, degenerative changes of cytoplasm, and pyknosis of nuclei were observed in early stage, however, a gradual regeneration and reorganization of the intracellular organelles were observed from 14 day experimental group.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.1
• /
• pp.49-54
• /
• 2014

Background: Hydrogels are a class of polymers that can absorb water or biological fluids and swell to several times their dry volume, dependent on changes in the external environment. In recent years, hydrogels and hydrogel nanocomposites have found a variety of biomedical applications, including drug delivery and cancer treatment. The incorporation of nanoparticulates into a hydrogel matrix can result in unique material characteristics such as enhanced mechanical properties, swelling response, and capability of remote controlled actuation. Materials and Methods: In this work, synthesis of hydrogel nanocomposites containing magnetic nanoparticles are studied. At first, magnetic nanoparticles ($Fe_3O_4$) with an average size 10 nm were prepared. At second approach, thermo and pH-sensitive poly (N-isopropylacrylamide -co-methacrylic acid-co-vinyl pyrrolidone) (NIPAAm-MAA-VP) were prepared. Swelling behavior of co-polymer was studied in buffer solutions with different pH values (pH=5.8, pH=7.4) at $37^{\circ}C$. Magnetic iron oxide nanoparticles ($Fe_3O_4$) and doxorubicin were incorporated into copolymer and drug loading was studied. The release of drug, carried out at different pH and temperatures. Finally, chemical composition, magnetic properties and morphology of doxorubicin-loaded magnetic hydrogel nanocomposites were analyzed by FT- IR, vibrating sample magnetometry (VSM), scanning electron microscopy (SEM). Results: The results indicated that drug loading efficiency was increased by increasing the drug ratio to polymer. Doxorubicin was released more at $40^{\circ}C$ and in acidic pH compared to that $37^{\circ}C$ and basic pH. Conclusions: This study suggested that the poly (NIPAAm-MAA-VP) magnetic hydrogel nanocomposite could be an effective carrier for targeting drug delivery systems of anti-cancer drugs due to its temperature sensitive properties.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.646-651
• /
• 2018

This paper reports that the electronic properties at a $P3HT/TiO_2$ interface associated with exciton dissociation and transport can be tailored by the insertion of a graphene quantum dot (GQD) layer. For donor/acceptor interface modification in an $ITO/TiO_2/P3HT/Al$ photovoltaic (PV) device, a continuous GQD film was prepared by a sonication treatment in solution that simplifies the conventional processes, including laser fragmentation and hydrothermal treatment, which limits a variety of component layers and involves low cost processing. The high conductivity and favorable energy alignment for exciton dissociation of the GQD layer increased the fill factor and short circuit current. The origin of the improved parameters is discussed in terms of the broad light absorption and enhanced interfacial carrier transport.

• Journal of Acupuncture Research
• /
• v.32 no.3
• /
• pp.41-51
• /
• 2015

Objectives : This study was performed to investigate the effects of $LR_3$ and $SP_6$ acupuncture on renal damage in streptozotocin(STZ)-induced diabetic mice. Methods : ICR male mice were stabilized for a week and divided into four groups: a normal mice group(N), no-acupuncture diabetic mice group(Control), $LR_3$ acupuncture diabetic mice group($LR_3$), and $SP_6$ acupuncture diabetic mice group($SP_6$). Diabetes was experimentally induced by intraperitoneal injection of STZ(150 mg/kg) in citrate buffer(pH 4.5). For two weeks, $LR_3$ and $SP_6$ acupunctures were administered bilaterally at each point once a day. After two weeks, the animals' weight was measured and they underwent a laparotomy. Serum glucose and blood urea nitrogen(BUN) were measured from the blood taken from the heart. We measured glucose, reactive oxygen species(ROS), peroxynitrite($ONOO^-$) and thiobarbituric acid reactive substances(TBARS) in the kidney and compared expression levels of superoxide dismutases(SOD), glutathione peroxidase(GPx), nuclear factor-kappa B(NF-${\kappa}B$), cyclooxygenase-2 (COX-2), inducible nitric oxide synthase(iNOS) and Interleukin-1 beta(IL-$1{\beta}$). Results : BUN significantly decreased in $LR_3$, $SP_6$ compared to the control group. $LR_3$ showed significantly decreased glucose compared to the control group. $LR_3$, $SP_6$ significantly decreased in ROS and $ONOO^-$ compared to the control group. $LR_3$ significantly decreased in TBARS compared to the control group. $SP_6$ significantly increased in expressions of SOD-1, catalase, and GPx compared to the control group. $LR_3$, $SP_6$ significantly decreased in COX-2 compared to the control group. $SP_6$ significantly decreased in IL-$1{\beta}$ compared to the control group. Conclusions : This study suggests that $LR_3$ acupuncture may be effective in controlling glucose and lipid peroxidation and that $SP_6$ acupuncture may have anti-oxidative and anti-inflammatory effects on renal damage in STZ-induced diabetic mice.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.2
• /
• pp.165-170
• /
• 2009

The increase in P availability to rice under flooded soil conditions involves the reductive dissolution of iron phosphate and iron (hydr)oxide phosphate. However, since $NO_3^-$ is a more favourable electron acceptor in anaerobic soils than Fe, high$NO_3^-$ loads function as a redox buffer limiting the reduction of Fe. The effect of adding $NO_3^-$ on Fe reduction and P release in paddy soil was investigated. Pot experiment was conducted where $NO_3^-$ was added to flooded soil and changes of redox potential and $Fe_2^+$, $NO_3^-$ and $PO_4^{3-}$ concentrations in soil solution at 10 cm depth were monitored as a function of time. Redox potential decreased with time to -96 mV, but it was temporarily poised at about 330${\sim}$360 mV when $NO_3^-$ was present. Nitrate addition to soil led to reduced release of $Fe_2^+$ and prevented the solubilization of P. Phosphate in pore water began to rise soon after incubation and reached final concentrations about 0.82 mg P/L in the soil without $NO_3^-$ addition. But, in the soil with $NO_3^-$ addition, $PO_4^{3-}$ in pore water was maintained in the range of 0.2${\sim}$0.3 mg P/L. The duration of inhibition in $Fe_2^+$ release was closely related to the presence of $NO_3^-$, and the timing of $PO_4^{3-}$ release was inversely related to the $NO_3^-$ concentration in soil solution. The results suggest that preferential use of $NO_3^-$ as an electron acceptor in anaerobic soil condition can strongly limit Fe reduction and P solubilization.

• The Journal of the Petrological Society of Korea
• /
• v.3 no.1
• /
• pp.1-19
• /
• 1994

We present petrography, mode and chemistry data for Fe-Ti oxide minerals from the Mesozoic granitoids in South Korea. Magnetites from the Daebo Uurassic) granites are nearly pure $Fe_3O_4$, while those from the Bulgugsa (Cretaceous) granites contain considerable amounts of Mn and Ti. This is probably related to rapid cooling of the Bulgugsa granites compared with slow cooling of Daebo granites, which is supported by geologic relations and hornblende geobarometry results of Cho and Kwon (1994) on the emplacement depth for these granites. The composition of ilmenite does not shew appreciable difference between the Daebo and Bulgugsa granites. However, $Fe_2O_3$ contents are higher for the ilmenites coexisting with magnetite than for those without magnetite. In the temperature vs. oxygen fugacity diagram, the Bulgugsa granites plot near Ni-NiO and QFM buffer curves, although only two samples show greater than the granite solidus temperature. The mode data suggest that both magnetite- and ilmenite-series exist in Daebo and Bulgusa granites from the Kyonggi massif, Ogcheon belt and Youngnam massif, while only magnetite-series exists in Bulgugsa granites from the Kyongsang basin. Many ilmenite-series granites occur in the Ogcheon belt, which might be related to assimilation of carboniferous sediments in the belt. The proportion (44 : 56) between ilmenite- and magnetite-series for the Daebo granites is significantly different from that of Ishihara et al. (1981) who showed, using magnetic susceptibility data, predominance of ilmenite-series (more than 70%) for the Daebo granites, which can be mainly attributed to preference in sampling and to wrong assignment of age for some plutons. We also found magnetite in weakly-magnetized Kanghwa granite which was formerly classified as ilmenite-series by Ishihara et al. (1981). The proportion of ilmenite-series increases in the order of hornblende biotite granite, biotite granite and two mica granite. We conclude from these observations that the ilmeniteseries granites might have originated from contamination of carboniferous crustal material and/or such source material.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Food Science and Preservation
• /
• v.30 no.6
• /
• pp.1095-1106
• /
• 2023

This study investigated the anti-oxidative and anti-inflammatory effects of Aster glehni (AG) extract in RAW 264.7 cells and Caenorhabditis elegans. The total polyphenol and flavonoid contents were higher in the ethanol extracts than in the hot water extracts. As a result of measuring the moisture contents (%) and extraction yields (%) of AG and drying A. glehni for processing (DAG), 70% ethanol, which has the highest percentage of extraction yield, was selected as the final solvent. DPPH radical scavenging activity showed higher antioxidant activity of ethanol extracts of DAG than AG. The cytotoxicity assay of the AG or DAG ethanol extracts was treated at different concentrations (25, 50, and 100 ㎍/mL), and cell viability rates were higher than 80% at all concentrations. The LPS-stimulated nitric oxide (NO) production in RAW 264.7 was significantly reduced at all concentrations of AG and DAG groups. As a result of measuring the gene expression of iNOS, which induces NO production, the AG or DAG group decreased by 33% and 32%, compared with the phosphate buffer saline (PBS) group. Under inflammatory stress conditions, the survival rate of C. elegans treated with AG or DAG ethanol extract with LPS showed concentration-dependent improvement in survival rate compared with the PBS group. Considering these results, AG could potentially be developed as an antioxidant and anti-inflammatory functional food material.

• Journal of Yeungnam Medical Science
• /
• v.17 no.1
• /
• pp.21-30
• /
• 2000

Background: The purpose of the present study was to investigate the effect of exercise on the activities of antioxidant enzymes, super oxide dismutase(SOD), glutathione peroxidase(GPX) and catalase(CAT) of skeletal muscle(gastrocnemius) and liver in streptozotocin(STZ) induced diabetic rats. The malondialdehyde(MDA) concentration was also measured as an index of lipid poroxidation of tho tissues by exercise-induced oxidative stresses in diabetic rats. Material and Methods: Male Sprague-Dawley rats were randomly divided into control and STZ-induced diabetic rats. The STZ in citrate buffer solution was injected twice at S days intervals intraperitoneally(50, 70 mg/kg respectively). On the 28th day after the first STZ injection, the diabetic animals were randomly divided into pre- and post-exercise groups, The exercise was introduced to the rats of post-exercise group by treadmill running until exhaution with moderate intensity ($V_{O2max}$: 50-70%) of exercise. The duration of average running time was 2 hours and 19 minutes. Results: The blood glucose concentration was increased(p<0.001) and plasma insulin concentration was decreased(p<0.001) in the diabetic rats. The glycogen concentration in the muscle and liver was decreased by exhaustive exercise in the diabetic rats(p<0.001), In the skeletal muscle, the activities of GPX was increased(p<0.05) and the activities of SOD and CAT were not changed in the diabetic rats compare to those of the control rats. The activities of GPX was not changed by exercise but the activities of SOD(p<0.01) and CAT(p<0.01) were decreased by exercise in the diabetic rats, The concentration of MDA was not changed by exercise in diabetic rats, and the values of pre-exercise and post-exercise diabetic rats were not different from the value those of control rats, In the liver, the activities of SOD was decreased(p<0.01), and the activities of GPX and CAT were not changed in diabetic rats compared to the values of control rats, The activities of SOD, GPX and CAT were not changed by exercise in diabetic rats but the activity of SOD seemed to decrease slightly, The MDA concentration was increased in the diabetic rats compared to the values of control rats(p<0.001), but there was no change of MDA concentration by exercise in diabetic rats, Conclusions: In summary, exhaustive physical exercise did not seem to impose oxidative stress on the skeletal muscle because of due to oxygen free radicals, regardless of the decrease in SOD and CAT in the diabetic rats, In liver tissue, the tissue damage by oxidative stress was observed in diabetic rats but the additional tissue damage by exhaustive physical exercise was not observed.