• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.20.2-20
• /
• 2003

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2006.11a
• /
• pp.24.1-24.1
• /
• 2006

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2006.05a
• /
• pp.31.1-31.1
• /
• 2006

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.7
• /
• pp.58-68
• /
• 1995

Polysilicon capacitors with pyrogenic oxide and TEOX oxide as insulators were fabricated to develop capacitors which can be applied to analog CMOS IC, and the characteristics of the capacitors were compared with each other. The morphology of bottom polysilicon in pyrogenic oxide capacitor is degraded due to the generaged protuberances of the polysilicon grain during oxidataion. The polysilican capacitor with pyrogenic oxide of 57 nm thickness showed that the effective potential barrier height of 0.45 eV is much less than that of MOS capacitor (3.2 eV)when the top electrode is biased with a positive volgate. The morphology of the polysilicon capacitor with TEOS oxide, however, was not degraded during oxide deposition by LPCVD. The polysilicon capacitor with TEOS oxide of 54 nm thickness showed the effective potential barrier height of 1.28 eV when the top electrode is biased with a negative voltage. Therefore, it is concluded that the polysilicon capacitor with TEOS oxide is more applicable to analog CMOS IC than the pyrogenic oxide polysilicon capacitor.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.10
• /
• pp.778-783
• /
• 1998

Film characteristics of thin ONO dielectric layers for MONOS(metal-oxide-nitride-oxide-semiconductor) EEPROM was investigated by TEM, AES and AFM. Seocnd derivative spectra of Auger Si LVV overlapping peak provide useful information fot chemical state analysis of superthin film. The ONO film with dimension of tunnel oxide 23$\AA$, nitride 33$\AA$, and blocking oxide 40$\AA$ was fabricated. During deposition of the LPCVD nitride film on tunnel oxide, this thin oxide was nitrized. When the blocking oxide was deposited on the nitride film, the oxygen not only oxidized the nitride surface, but diffused through the nitride. The results of ONO film analysis exhibits that it is made up of $SiO_2$ (blocking oxide)/O-rich SiON(interface)/N-rich SiON(nitride)/ O-rich SiON(tunnel oxide)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.264-264
• /
• 2013

Strong metal-support interaction effect is an important issue in determining the catalytic ac-tivity for heterogeneous catalysis. In this study, we investigated the support effect and the role of organic capping layers of two-dimensional Pt nanocatalysts on reducible metal oxide supports under the CO oxidation. Several reducible metal oxide supports including CeO2, Nb2O5, and TiO2 thin films were prepared via sol-gel techniques. The structure, chemical state and optical property were characterized using XRD, XPS, TEM, SEM, and UV-VIS spectrometer. We found that the reducible metal oxide supports have a homogeneous thin thickness and crystalline structure after annealing at high temperature showing the different optical band gap energy. Langmuir-Blodgett technique and arc plasma deposition process were employed to ob-tain Pt nanoparticle arrays with capping and without capping layers, respectively on the oxide support to assess the role of the supports and capping layers on the catalytic activity of Pt catalysts under the CO oxidation. The catalytic performance of CO oxidation over Pt supported on metal oxide thin films under oxidizing reaction conditions (40 Torr CO and 100 Torr O2) was tested. The results show that the catalytic activity significantly depends on the metal oxide support and organic capping layers of Pt nanoparticles, revealing the strong metal-support interaction on these nanocatalysts systems.

• Applied Chemistry for Engineering
• /
• v.20 no.6
• /
• pp.612-616
• /
• 2009

Transparent conductive oxide (TCO) films have been widely used in the field of flat panel display industry. Transparent conductive indium zinc oxide (IZO) thin films with excellent chemical stability have attracted much attention as an alternative material for indium tin oxide (ITO) films. In this study, using a $In_2O_3$ and ZnO powder mixture with a ratio of 90 : 10wt% as a target, IZO films were prepared on polynorbornene (PNB) substrates by electron beam evaporation. The effect of substrate temperature and $O_2$ introduction flow rate were investigated in terms of electrical and optical properties of deposited IZO films. The best electrical and optical properties we obtained from this study were sheet resistance value of $5.446{\times}10^2{\Omega}/{\boxempty}$ and optical transmittance of 87.4% at 550 nm at $O_2$ introduction flow rate of 4 sccm, deposition rate of $2{\AA}$/sec, thickness of 1000 $\AA$ and substrate temperature of $150^{\circ}C$.

• Korean Journal of Materials Research
• /
• v.10 no.4
• /
• pp.282-289
• /
• 2000

$PbTiO_3$ films were fabricated by electron cyclotron resonance plasma enhanced chemical vapor deposition(ECR-PECVD). Deposition characteristics of $PbTiO_3$films on $RuO_2$ and Pt substrates were investigated with varying the flow rate of metalorganic source and substrate temperature. The residence time of Pb-oxide molecules in much longer on $RuO_2$ than on Pt substrate, while the perovskite nucleation is more difficult on $RuO_2$ than on Pt substrate. Therefore, the process conditions to obtain the single perovskite $PbTiO_3$ phase are more restricted on $RuO_2$ than on Pt substrates. An introduction of Ti-oxide seed layer increases perovskite nucleation density and thus enlarges the process window to obtain the single perovkite phase. The introduction of Ti-oxide seed layer make the PZT film that Ti-components of $PbTiO_3$ are partially substituted with Zr atoms have single perovskite phase for the wide range of Zr/(Zr+Ti) concentration ratios.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.330-330
• /
• 2012

일반적으로 투명전극 재료로서 이용되는 Indium Tin Oxide (ITO)는 높은 전기전도도에도 불구하고, 가시광선 영역에서 높은 광학적 투과도를 지니고 있다. 즉, 비저항이 $10^{-3}{\Omega}/cm$ 보다 작으면서, 380 nm에서 780 nm사이의 가시광선 영역에서 80%이상의 투과도를 가지는 우수한 transparent conducting oxide 물질로 인식되고 있다. 또한 이 물질은 가시광선 영역에서의 굴절률이 대략 2정도이기 때문에, 다른 반도체재료와 진공사이의 계면에서 발생하는 반사를 줄여, 태양광전지나 LED 등에 이용될 수 있는 무반사 코팅재로 이용될 수 있다. 이러한 이유로 현재 각 분야에서 ITO에 관한 연구가 활발히 진행되고 있다. 본 연구에서는 ITO에 대한 기초연구로서, 전자빔 증착법으로 박막을 증착시키는 동안 증착속도에 따른 박막의 물성변화를 조사하였다. 또한 수직으로 증착할 때와 Glancing Angle Deposition 방법을 이용하였을 때, 증착속도에 따른 박막의 물성변화를 비교 분석하고자 하였다. 여기서, 증착속도는 $1{\AA}/s$에서 $4{\AA}/s$ 범위로 변화를 주었고, 증착물질과 기판의 각도는 $0^{\circ}$, $15^{\circ}$, $45^{\circ}$, $75^{\circ}$로 하였다. 먼저 수직으로 증착할 때, 증착속도의 변화에 따른 반사도, 투과도 및 굴절률과 증착단면의 구조를 비교하고, 다음으로 기판에 각도를 주어 박막을 증착하였을 때의 증착속도에 따른 박막의 광학적 및 구조적 물성의 변화를 측정하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.391-391
• /
• 2010

The stability enhancement of Znic oxide thin film transistor deposited by PLD-DBD has been reported here using the bias temperature stress test. Znic oxide (ZnO) thin films were deposited on $SiO_2$/Si (100) by pulsed laser deposition method with and without dielectric barrier discharge (DBD) method. The DBD is the efficient method to adopt the nitrogen ions into the thin films. The TFT characteristics of ZnO TFTs with and without Nirogen (N) doping show similar results with $I_{on/off}$ of $10^5{\sim}10^6$. However. the bias temperature stress (BTS) test of N-doped ZnO TFT with DBD shows higher stability than that of ZnO TFT.