• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.2
• /
• pp.51-56
• /
• 2019

$H_2S$ is a detrimental impurity that must be removed for upgrading biogas to biomethane. This study investigates an economic method to mitigate $H_2S$ content, combining scrubbing and aeration. The desulfurization experiments were performed in a laboratory apparatus using EDTA-Fe or landfill leachate as the catalyst and metered mixture of 50-52% (v/v) $CH_4$, 32-33% (v/v) $CO_2$ and 500-1,000 ppmv $H_2S$ balanced by $N_2$ using the C city landfill gas. Dissolved iron concentration in the liquid medium significantly affected the oxidation efficiency of sulfide. Iron components in landfill leachate, which would be available in a biogas/landfill gas utilization facility, was compatible with an external iron chelate. More than 70% of $H_2S$ was removed in a contact time of 9 seconds at iron levels at or over 28 mM. The scrubbing-aeration process would be a feasible and easy-to-operate technology for biogas purification.

• Journal of ILASS-Korea
• /
• v.23 no.4
• /
• pp.175-184
• /
• 2018

Emission characteristics of regulated (NOx, PM, CO, NMHC) and unregulated (VOCs, aldehydes, PAHs) air pollutants were investigated for diesel heavy duty buses equipped with different after-treatment systems (DPF+EGR and SCR) under urban driving cycle. The combustion temperature and the working temperature of SCR catalysts were important to make impact on NOx emissions, whereas PM emissions were low. The alkane groups dominated NMVOCs emissions, making 42.6~59.4% of sum of the NMVOCs emissions. Especially, alkane emissions of DPF+EGR-equipped vehicle included DOC had 14.9~15.5% higher than those of SCR-equipped vehicle due to low efficiency of oxidation catalyst. In the case of individual NMVOCs, n-nonane and propylene emissions highly occupied for DPF+EGR and SCR, respectively. Formaldehyde emissions among aldehydes were the highest and PAHs emissions were hardly detected except naphthalene and phenanthrene. The NMHC speciation has been shown to be the highest of the formaldehyde ranged 20.8~21.5%. The results of this study will be contributed to establish Korean HAPs emission inventory for automobile source.

• Food Science of Animal Resources
• /
• v.39 no.2
• /
• pp.309-323
• /
• 2019

Fish oil consists of omega-3 fatty acids which play an important role in human health. Its susceptibility to oxidation causes considerable degradation during the processing and storage of food products. Accordingly, encapsulation of this ingredient through freeze drying was studied with the aim of protecting it against environmental conditions. Gum arabic (GA) was used as the wall material for fish oil nanoencapsulation where tween 80 was applied as the emulsifier. A water-in-oil (W/O) emulsion was prepared by sonication, containing 6% fish oil dispersed in aqueous solutions including 20% and 25% total wall material. The emulsion was sonicated at 24 kHz for 120 s. The emulsion was then freeze-dried and the nanocapsules were incorporated into probiotic fermented milk, with the effects of nanocapsules examined on the milk. The results showed that the nanoparticles encapsulated with 25% gum arabic and 4% emulsifier had the highest encapsulation efficiency (EE) (87.17%) and the lowest surface oil (31.66 mg/100 kg). Using nanoencapsulated fish oil in fermented milk significantly (p<0.05) increased the viability of Lactobacillus plantarum as well as eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) contents. The fermented milk sample containing fish oil nanoencapsulated with 25% wall material and 4% emulsifier yielded the greatest probiotic bacterial count (8.41 Log CFU/mL) and the lowest peroxide value (0.57 mEq/kg). Moreover, this sample had the highest EPA and DHA contents. Utilizing this nanoencapsulated fish oil did not adversely affect fermented milk overall acceptance. Therefore, it can be used for fortification of low fat probiotic fermented milk.

• Journal of the Korean Society of Urban Environment
• /
• v.18 no.4
• /
• pp.391-399
• /
• 2018

In this study, Diazinon which is the most widely used organophosphorus pesticides (OPPs) among pesticides was removed by ozone/hydrogen peroxide advanced oxidation process (Peroxone AOP). Diazinon is mainly found in groundwater, drinking water, rivers and ponds that are near agricultural areas using the pesticide. Accumulation of Diazinon on the body in the form of metabolites causes neurotoxicity, confusion, dizziness and vomiting. Diazinon is not easily removed by conventional water treatment processes. This study investigated the Diazinon removal characteristics with OH radicals with strong oxidizing power generated by using ozone and hydrogen peroxide. We determined optimal hydrogen peroxide/ozone injection molar ratio and confirmed the elimination reaction to initial Diazinon concentration, pH and DOC concentration, which are factors influencing the removal efficiency. Domestic researches on pesticide removal in the environment are much less than the cases of overseas. This study is expected to provide a basis for the process design for pesticide removal.

• Journal of Korean Society on Water Environment
• /
• v.27 no.6
• /
• pp.877-884
• /
• 2011

In this paper, the removal characteristics of dissolved organic carbon (DOCs) by micro bubble ozonation process and $O_3/UV$ process were comparatively studied. In the point of DOC removing reaction coefficient, micro bubble ozonation system and $O_3/UV$ process had not significant difference, $0.0120sec^{-1}$ and $0.0141sec^{-1}$. Therefore micro bubble ozonation process is more suitable for tertiary treatment of sewage in the point of installation and maintenance cost-reducing. The optimum ozone injection rate was 2.0 g $O_3/g$ DOC and HRT was 3 min for the micro bubble ozonation process. The removal efficiency of DOC and SUVA in micro bubble ozonation system was 32.8% and 58.3% respective. Biological aerated filter (BAF) process was installed to remove soluble organic material increased by micro bubble ozonation system. And the effluent BOD of BAF was below 1.0 mg/L. In the view of cost-effectiveness, $O_3/BAF$ process was more profitable than $O_3/UV/BAF$ process for tertiary treatment of sewage. In order to nitrify ammonia in the BAF process completely, $NH_4{^+}-N$ concentration in the influent water of BAF should be designed considering low water temperature in the winter season.

• Journal of Soil and Groundwater Environment
• /
• v.25 no.4
• /
• pp.77-86
• /
• 2020

Persulfate-based advanced oxidation processes (AOPs) can oxidize various organic pollutants. In this study, persulfate/Fe(II) system was utilized in phenol removal, and the effect of various organic and inorganic chelators on Fe(II)-medicated persulfate activation was investigated. The feasibility of persulfate/Fe(II)/chelator in cleanup of phenol-contaminated sediment was confirmed through toxicity assessment. In persulfate/Fe(II) conditions, the rate and extent of phenol removal increased in proportion to persulfate concentration. In chelator injection condition, the rate of phenol removal was inversely proportional to chelator concentration when it was injected above optimum ratio. Thiosulfate showed greater chelation tendency with persulfate than citrate and interfered with persulfate access to Fe(II), making the latter a more suitable chelator for enhancing persulfate activation. In contaminated clay sediment condition, 100% phenol removal was obtained within an hour without chelator, with the removal rate increased up to four times as compared to the rate with chelator addition. A clay sediment toxicity assessment at persulfate:Fe(II):phenol 20:10:1 ratio indicated 71.3% toxicity reduction with 100% phenol removal efficiency. Therefore, persulfate/Fe(II) system demonstrated its potential utility in toxicity reduction and cleanup of organic contaminants in sediments.

• Fisheries and Aquatic Sciences
• /
• v.25 no.5
• /
• pp.276-286
• /
• 2022

This study is focused on the effect of phycobiliprotein extraction of Gracilaria on the quality of common carp burgers, and the application of nanoliposomes containing pigment in the improvement of its antimicrobial and antioxidant activity of burgers during refrigerated storage in 18 days. Burgers were incorporated with phycobiliprotein and liposomal phycobiliprotein (2.5% and 5% w/w), and their chemical and microbial changes in terms of pH, peroxide value (PV), thiobarbituric acid (TBA), total volatile basic nitrogen (TVB-N), total viable counts (TVC), psychrotrophic bacterial counts (PTC), and sensory characteristics were evaluated. Results presented a nanoliposome size of about 515.5 nm with capable encapsulation efficiency (83.98%). Our results showed non-encapsulated phycobiliprotein could delay the deterioration of common carp burgers, as a reduction in PV, TBA, and TVB-N, TVC, and PTC values in burgers treated with free and nano encapsulated phycobiliprotein. Moreover, the potential of phycobiliprotein was improved when it was encapsulated into chitosan coated liposomes. Burgers treated with 5% nanoliposomes displayed the lowest amount of lipid oxidation and microbial deterioration in comparison to others during storage. According to chemical, microbial and sensory evaluation, the shelf life of common carp burgers was increased in samples treated with encapsulated phycobiliprotein at 2.5% and 5%, as compared to the control (p ≤ 0.05).

• Journal of the Korean Chemical Society
• /
• v.66 no.6
• /
• pp.436-441
• /
• 2022

Because the nanoporous electrodes has large electrochemical surface areas, extensive studies have been focused on their fabrication methods. In this paper, a method for introducing a nanoporous gold (NPG) structure on the surface of an ultramicroelectrode (UME) using potentiostatic anodization was investigated. A well-defined NPG structure was introduced on the surface of the UME when a potential of 1.3 V was applied in 0.1 M phosphate buffer solution (pH 8) containing 1 M KCl. The anodic oxidation efficiency was investigated by observing the effect of the applied potential, the reaction time, and the size of the electrode on the roughness factor (R_f) of the prepared NPG-UMEs. In a short time of about 10 minutes, NPG-UME with a large R_f value of about 2000 could be prepared, which could be effectively used for electrochemical glucose detection. The results shown in this work are expected to have great applicability when performing electrochemical analysis with a small sample volume.

• Food Science of Animal Resources
• /
• v.43 no.3
• /
• pp.502-511
• /
• 2023

The use of nitrite as a conventional curing agent is decreasing because of the negative consumer perception of synthetic compounds in foods. Therefore, this study was conducted to investigate the efficacy of dongchimi as an alternative to synthetic nitrite and its effect on the qualitative properties of emulsion-type sausages. Under all tested fermentation conditions, both nitrite and nitrate contents were the highest when dongchimi was fermented at 0℃ for 1 wk. The fermented dongchimi was powdered and added to the sausages. Emulsion-type sausages were prepared with 0.25% (treatment 1), 0.35% (treatment 2), 0.45% (treatment 3), or 0.55% (treatment 4) dongchimi powder, with 0.01% sodium nitrite-treated (control 1) and 0.40% celery powder-treated (control 2) sausages as controls. There were not different (p>0.05) in the pH, cooking yield, CIE L^*, and CIE a^* between the control 1 and treatments 2, 3, and 4. CIE b^* was significantly higher (p<0.05) in the control 2 and lower (p<0.05) in the control 1 than that in the other groups. Treatment 4 and control 1 had similar contents of residual nitrite, nitrosyl hemochrome, and total pigment. Additionally, treatment 4 exhibited a significantly better (p<0.05) curing efficiency than the control 1. However, naturally cured sausages showed higher (p<0.05) lipid oxidation than the control 1. This study suggests that the use of more than 0.35% dongchimi powder could replace sodium nitrite or celery powder as curing agents for emulsion-type sausages.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.241-241
• /
• 2020

축산물의 수요가 증가함에 따라 가축의 사육규모 및 두수도 증가하여 가축분뇨의 발생량이 증가한다. 가축분뇨는 일반하수에 비해 고농도의 유기물, 질소, 인 등의 오염물질이 포함되어 있다. 적절한 처리 없이 하수처리장 및 수계로 유입될 경우 하수처리장 처리 효율에 영향을 미치거나 부영양화 등 다양한 문제를 야기 시킬 수 있다. 이러한 문제를 해결하기 위해 아질산화 반응을 이용하는 다양한 공정들이 연구되고 있다. 아질산화 반응은 완전 질산화 반응에 비해 질산화 단계에서 약 25%의 산소요구량이 절감되고, 탈질 단계에서 약 40%의 탄소원이 절감되는 경제적 장점이 있기 때문이다. 본 연구에서는 부피 8L의 실험실 규모 아질산화 반응조 원통형 아크릴로 제작되었고, 서울 A하수처리장 미생물을 채취하여 사용했다. 또한 SRT의 영향을 살펴보기 위하여 35℃ 동일 온도를 유지했다. 반응조 슬러지 반송 및 폐기가 없는 완전 혼합 반응조로 SRT와 HRT가 동일하게 운전하는 방법을 사용하여 SRT를 조절하는 방식으로 운전했다. SRT의 경우 8일, 6일, 4일, 2일의 변경조건을 통해서 차이를 살펴보았다. Ammonia Removal Rate(%)의 경우 각각 86%, 86%, 87%, 24%의 효율을 보였고, Nitrite Conversion Rate(%)의 경우 각각 10%, 45%, 80%, 41%의 효율을 보였다. 35℃ 실험실 규모 반응조에서 가축분뇨 유입 원수의 아질산화 반응을 유도하기 위해서는 SRT운전 조건은 4~8일, 고효율의 아질산화 반응을 유도하기 위해서는 SRT 4일 조건이 적합하다고 판단된다. 본 연구는 실제 가축분뇨 처리 효율 상승을 위해서 아질산화 공법을 도입할 경우 중요한 자료로 이용 가능할 것으로 판단된다.