• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.459-459
• /
• 2011

Graphene has many fascinating material properties such as high electron mobility, high optical transparency, excellent thermal conductivity, superior Young's modulus, etc. Several studies have recently found that single-layer graphene is chemically more reactive than few-layer graphene when supported on silicon dioxide substrates with sub-nm roughness. In this study, we have investigated the influence of substrates on chemical reactivity of graphene. Morphology and thermal oxidation behavior of graphene on atomically flat mica substrates were studied by atomic force microscopy (AFM) and Raman spectroscopy compared to graphene on SiO2/Si substrates. Notably, oxidation of single-layer graphene proceeds more slowly on mica than SiO2/Si. Detailed analysis led to a conclusion that deformation along the out-of-plane direction enhances reactivity of graphene.

• 한국표면공학회지
• /
• 제50권1호
• /
• pp.42-45
• /
• 2017

The magnesium-base AZ61 alloy was cast while adding 1% CaO powder into the melt. It was hot extruded, and oxidized at $550-650^{\circ}C$ in air in order to study its microstructure and oxidation behavior. Initially added CaO powder reacted with Al in the melt to $Al_2Ca$ particles that aligned along the extrusion direction. The formed $Al_2Ca$ particles increased the oxidation resistance through forming the superficial CaO scale at the upper part of the thin MgO oxide scale.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.857-858
• /
• 2006

In order to clarify the wear resistance as cutting tools, the effect of oxygen addition on oxidation behavior of the ${\beta}-Si_3N_4$ ceramics with 5 mass% $Y_2O_3$ and 2 or 4 mass% $Al_2O_3$ was investigated by performing oxidation tests in air at $1300^{\circ}$ to $1400^{\circ}C$ and cutting performance tests. From test results, we could conclude that the mechanical properties of ${\beta}-Si_3N_4$ ceramics depending on oxygen introduction are much effective on cutting performance improvements of ${\beta}-Si_3N_4$ ceramics.

• 한국표면공학회지
• /
• 제24권4호
• /
• pp.222-229
• /
• 1991

The oxidation behavior of Ni-6wt.% Cr alloys with various concentration of alumina dispersions(5vol.% 10vol.%) was determined at 1000 and 110$0^{\circ}C$ in oxygen of 1 atm. pressure. Some general observations were ascertained. These include: (a) the addition of alumina dispersoids significantly increased the oxidation resistance of Ni-6wt.% Cr alloy; (b) the rate of oxidation was distinctly decreased as a function of the volume percent of oxide dispersion; and (c) the presence of alumina dispersions promoted the formation of continous, protective Cr2O3 layer at 6 wt.% Cr.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.355-356
• /
• 2006

WC-TiC-TaC binderless cemented carbide was oxidized under low partial pressure of oxygen (50ppm) at 873K for 1 to 20 h. Surface roughness was measured using atomic force microscope, and effect of TiC amount on oxidation behavior of the carbide was investigated. WC phase was oxidized more easily than WC-TiC-TaC solid solution phase. With an increase in TiC amount, WC-TiC-TaC phase increased and the oxidation resistance of the carbide increased.

• 한국재료학회지
• /
• 제15권7호
• /
• pp.439-443
• /
• 2005

The oxidation behavior and the thermal stability of nanocrystalline Al-25Ti-8Mn intermetallic compound were investigated. $Al_3Ti$ intermetallic compound, which has a potential for high temperature structural material, was fabricated by mechanical alloying(MA) with $8at.\%$ Mn to enhance the thermal stability and ductility. And Al-25Ti-8Mn intermetallic compound was sintered by spark plasma sintering(SPS) at $700^{\circ}C$. After sintering process, cubic $Ll_2$ structure was maintained without phase transformation and the grain size was about 50nm. To investigate the oxidation behavior of the specimens, thermal gravimetric analysis(TGA) was performed at 700, 800, 900, and $1000^{\circ}C$ for 24 h in $O_2$. As the temperature increased from $700^{\circ}C\;to\;900^{\circ}C$ the weight gain of specimens increased. However at $1000^{\circ}C$, unlike the oxidation behavior of $700^{\circ}C\;to\;900^{\circ}C$, the weight gain of specimen decreased drastically and the transition from linear rate region to parabolic rate region occurred rapidly due to the dense $\alpha-Al_2O_3$.

• 한국군사과학기술학회지
• /
• 제25권6호
• /
• pp.580-585
• /
• 2022

In this study, the high-temperature dielectric constant of Si₃N₄ ceramics, a representative non-oxide-based radome material, was evaluated and the cause of the dielectric constant change was analyzed in relation to the oxidation behavior. The dielectric constant of Si₃N₄ ceramics was 7.79 at room temperature, and it linearly increased as the temperature increased, showing 8.42 at 1,000 ℃. As results of analyzing the microstructure and phase for the Si₃N₄ ceramics before and after heat-treatment, it was confirmed that oxidation did not occur at all or occurred only on the surface at a very insignificant level below 1,000 ℃. Based on this, it is concluded that the increase in the dielectric constant according to the temperature increase of Si₃N₄ ceramics is irrelevant to the oxidation behavior and is only due to the activation of charge polarization.

• 한국결정성장학회지
• /
• 제9권1호
• /
• pp.119-125
• /
• 1999

본 연구는 싸이클론 반응로에서 $FeS_{2}$의 반응 특성에 관한 조사를 연구하였다. 수학적인 모형도로 이 반응로에서 $FeS_{2}$의 oxidation과 suifation 등을 전개하엿다. 모형은 $FeS_{2}$에서 chemical control shrinking core로서 그리고 ${Ca(OH)}_{2}$에서 fluid film control shrinking core로서 가정하였으며 수식으로서 발전시켰다. 본 실험은 이 반응 파라메터들의 영향에 연구로서 진행하였으며 즉 반응로의 온도변화, $FeS_{2}$의 입자크기, 공기 주입비율, 시료 주입비율, 그리고 $FeS_{2}$와 ${Ca(OH)}_{2}$ 비율 등이다. Oxidation과 Sulfation에 의한 반응물들은 화학적 및 물리적으로 특성을 기술하였다.

• 한국식품영양과학회지
• /
• 제32권7호
• /
• pp.1046-1052
• /
• 2003

Viscoelastic behavior of oxidized starch gel, modified with sodium hypochlorite (NaOCl) and the adding effects of protein in oxidized starch gel was studied by dynamic viscoelastic measurement. The storage modulus(G′) of starch gel increased with the increase of starch concentration. They showed higher value when starch suspension was treated to 95$^{\circ}C$ rather than 85$^{\circ}C$. Consistency of starch gel was decreased over 1.0% active Cl/g starch when heated to 95$^{\circ}C$, which means that the swelling of starch granules increased with concentration of NaOCl and showed more sensitive against shear. As the extent of oxidation increased, starch granules were easily destroyed. Therefore, it is hard to separate between compartment of leached-out amylose and that of amylopectin, which means that the ability of gel formation was reduced. When oxidized starches were gelatinized in presence of soy protein and sodium caseinate, it was found that G′ decreased, and frequency dependence of G′ and G" increased with the increased degree of oxidation in starch. The reduce of starch-protein interaction was thought to be through the dissociation of the branched amylopectin, which playa leading role in protein interaction, with the oxidation of starch.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2007년도 추계학술발표대회 및
• /
• pp.114.1-114.1
• /
• 2007