• 한국철도학회논문집
• /
• 제9권2호
• /
• pp.145-150
• /
• 2006

In this study, overturning safety for a tilting train has been evaluated. In the tilting train, the overturning safety is one of the most important factors because the carbody inclines inward a curve during curve negotiation. Dynamic analysis considering unbalanced lateral acceleration and carbody tilting has been carried out and the overturning safety for the tilting train has been evaluated according to height of CG of carbody. From these studies, the overturning safety for the tilting train under unbalanced lateral acceleration of $2m/s^2$ was superior to the conventional one at the same running speed.

• 한국소음진동공학회논문집
• /
• 제20권6호
• /
• pp.537-545
• /
• 2010

This study presents a method to evaluate overturning safety and derailment safety of korean tilting train using kinematic analysis of four-bar linkage tilting mechanism. The safety is evaluated considering tilting vehicle body CG displacement. The design sensitivity for stable and safe maximum speed is evaluated around current korean tilting train design data. The current design shows minimum center of gravity displacement. Higher speed can be achieved with larger center of gravity displacement.

• 한국조경학회지
• /
• 제51권5호
• /
• pp.1-12
• /
• 2023

본 연구는 조경시공 및 관리분야에서 수목관리, 전지 등과 같은 고소부위 작업을 위해 주로 사용하는 삼각지지형 이동식 사다리의 전도 안정성을 평가한 것이다. 산업현장에서 사용 빈도가 높은 이동식 사다리에 포함되는 삼각지지형 이동식 사다리는 작업 특성에 따라 바닥지지 형태가 일반적인 A형의 사면지지가 아닌 삼각지지 방식이고, 작업 높이도 이동식 사다리와 비교하여 2배 이상 높기 때문에 떨어짐과 함께 작업자의 안전을 위협하는 전도 발생 가능성이 매우 높다고 할 수 있다. 따라서, 국내에서 사용되고 있는 삼각지지형 이동식 사다리를 대상으로 관련 기준인 ANSI-ASC A14.7과 EN 131-Part 7에서 규정하고 있는 전도 안정성 평가를 기반으로 하여 작업 높이에 따른 전도모멘트와 저항모멘트를 계산할 수 있는 수식을 각각 유도하여 계산한 후, 이 값을 상호 비교하여 전도에 대한 안전율 및 전도 방향에 따른 안정성을 평가하였다. 각 기준에 따른 전도 안정성 평가 결과, EN 131-Part 7의 규정을 적용하면 후면방향 8단과 측면방향으로 6단 이상의 삼각지지형 이동식 사다리는 전도에 대해서 불안정한 것으로 평가되었으나, ANSI-ASC A14.7의 규정에 의하면 방향에 상관없이 모든 단수에서 전도에 대한 안정성을 확보하고 있는 것으로 평가되었다.

• 한국안전학회지
• /
• 제31권5호
• /
• pp.149-157
• /
• 2016

This paper presents the traffic speed limit of heavy vehicles at each wind velocity region, which is based on their accident risk analysis under cross-wind. The variables for the accident risk analysis are overall height, overall length, intake weight, and friction coefficient of the road surface. It was confirmed from analysis results that the risk of overturning increased with higher overall height and length, and the risk of sliding decreased with higher intake weight. The risk of sliding was largest at the friction coefficient of 0.1, and the risk of overturning was lagest at friction coefficient more than 0.25. Finally, traffic speed limit was proposed by using the accident risk analysis.

• Geomechanics and Engineering
• /
• 제11권4호
• /
• pp.457-469
• /
• 2016

Steep rock slope with water-filled tension crack will happen to overturn around the toe of the slope under seismic loading. This failure type is completely different from the common toppling failure occurring in anti-dipping layered rock mass slopes with steeply dipping discontinuities. This paper presents an analytical approach to determine the seismic factor of safety against overturning for an intact rock mass slope with water-filled tension crack considering horizontal and vertical seismic coefficients. This solution is a generalized explicit expression and is derived using the moment equilibrium approach. A numerical program based on discontinuous deformation analysis (DDA) is adopted to validate the analytical results. The parametric study is carried out to adequately investigate the effect of horizontal and vertical seismic coefficients on the overall stability against overturning for a saturated rock slope under two water pressure modes. The analytical results show that vertically upward seismic inertia force or/and second water pressure distribution mode will remarkably decrease the slope stability against overturning. Finally, several representative design charts of slopes also are presented for the practical application.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.504-509
• /
• 2005

Railway noise and vibration has been recognized as major problems with the speed-up of rolling stock. As a kind of solution to these problems, the decrease of stiffness of track pad have been tried. However, in this case, overturning of rail due to lateral force should be considered because it can have effect on the safety of running train. Therefore, above two things - decrease of stiffness of track pad and overturning of rail due to lateral force - should be considered simultaneously for the appropriate determination of spring coefficient of track pad. With this viewpoint, minimum spring coefficient of track pad is estimated through the comparison between the theoretical relationship about the overturning of rail and 3-dimensional FE analysis result. Two kinds of Lateral force and wheel load are used as input loads. Extracted values from the conventional estimation formula and the Shinkansen design loads are used. It is found that the overturning of rail changes corresponding to the change of the stiffness of track pad and the ratio of lateral force to wheel load. Moreover, it is found that the analysis model can have influence on the results. Through these procedure, minimum spring coefficient of track pad is estimated.

• 한국재난정보학회 논문집
• /
• 제19권1호
• /
• pp.60-68
• /
• 2023

연구목적: 본 연구에서는 석축단면의 설계를 지배하는 안정성 검토조건과 그에 따라 계산되는 블록 설치 폭의 변화양상을 살펴보고자 하였다. 연구방법: 이를 위해 높이 10m 인 석축을 가정하고 석축을 구성하는 블록 및 지반조건 등에 관해서는 일반적인 설계 값을 적용하여 활동 및 전도를 고려한 석축단면을 결정해보고 그 결과를 비교해 보았다. 연구결과: 설계결과에 따르면 활동에 대한 안정을 고려하여 결정된 블록의 설치 폭이 전도를 고려하여 결정된 블록의 설치 폭 보다 현저하게 작음을 알 수 있었는데 이러한 차이는 활동에 대한 안전율을 전도에 대한 안전율과 같게 적용하더라도 크게 개선되지는 않았다. 전도를 고려하여 블록 설치 폭을 결정하는 방법에는 전도되는 부분의 바닥을 수평으로 보는 방법과 하부의 파괴쐐기를 고려하는 방법이 있는데 석축의 설계를 지배하는 방법은 하부의 파괴쐐기를 고려하는 방법임을 알 수 있었다. 결론: 전도되는 부분의 하부 파괴쐐기를 고려하는 경우 가정한 파괴쐐기의 경사각이 클수록 블록 설치 폭 또한 커짐을 알 수 있었다. 특정한 경사각을 갖는 파괴쐐기를 가정한 벽체에 대하여 벽체 하부에서의 전도를 고려하는 경우 석축의 기하학적 제약조건에 의해 파괴쐐기의 경사각이 감소하게 되어 블록 설치 폭 또한 감소함을 알 수 있었다.

• 한국방사선학회논문지
• /
• 제14권4호
• /
• pp.361-366
• /
• 2020

MRI 검사가 필요한 유방조직확장기 삽입 환자에 대해 체내 안전성을 평가하고자한다. 토크는 1.5 T 정방향 진입 시 0 ml, 150 ml, 300 ml, 450 ml 각각 4, 3, 3, 2이었고, 1.5 T 역방향 진입 시 각각 4, 4, 4, 3이었다. 3.0 T 환경에서는 모든 조건에서 4를 나타냈다. 뒤집힘 실험은 1.5 T 환경에서 300 ml 이상에서 뒤집힘이 발생하지 않았고, 3.0 T 환경에서는 대부분 뒤집힘이 발생하였다. 유방조직확장기 삽입 환자의 MRI 검사는 안전성 측면에서는 3.0 T는 피하고 1.5 T에서 조건부로 가능하다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 춘계 학술대회논문집
• /
• pp.109-113
• /
• 2005

Recently, the weight of train is decreased by using the light material for improvement in energy efficiency. And the length of whole train is more increased for mass transportation of passengers and cargo. However, decrease of the weight and increase of the length of train can cause the train to be overturned or derailed by strong crosswind. In case of Korean Tilting Train eXpress (TTX), the situation can be more severe. TTX will be developed for a quasi-high speed train at 200km/h speed rate and operated on the existing tracks. Moreover, the weight of TTX will be much less than that of conventional train. It is supposed that TTX will be very sensitive to crosswind. In this paper, numerical analysis is used to investigate aerodynamic characteristics around TTX and obtain the induced lateral force by crosswind. After calculating derailment coefficient and overturning coefficient using numerical results, the crosswind safety of TTX is judged. This paper will be good data for judging crosswind safety of TTX.

• 한국철도학회논문집
• /
• 제10권3호
• /
• pp.271-277
• /
• 2007

The Korean Tilting Train eXpress (TTX) development program is in progress for the purpose of running speed or passenger's comfort improvement at the curved track. However, the speed up and light weight of train make poor the dynamic safety of the TTX in strong cross wind. In this paper, 3-dimensional numerical analysis on the flow field around the TTX under strong cross wind is performed for each operating condition, such as the train speed, cross wind speed, tilting/nontilting condition, and so on. Due to the strong cross wind, the pressure distribution around the train becomes asymmetric, especially at the leading car. Asymmetrical pressure distribution causes the side force and strong unstability. The side force on the train is proportional to the train speed and cross wind speed. Based on the numerical results, the overturning coefficients are predicted for investigation of the train stability, and all of them are less than the critical value, 0.9. The results in this study would be a good data for providing importance to judgement of cross wind safety of TTX.