• 한국항공우주학회지
• /
• 제34권8호
• /
• pp.1-7
• /
• 2006

본 연구에서는 3차원 비정렬 중첩격자계를 이용한 서로 겹쳐진 물체들 간의 상대운동 해석기법에 대한 연구를 수행하였다. 홀 컷팅 과정에서 격자요소를 구성하는 모든 격자점들이 다른 물체의 내부에 위치하는 물체 경계의 격자요소들을 계산에서 제외하였고, 일부분이 다른 물체의 내부에 위치하는 격자요소들은 계산영역에 포함하였다. 비정상 유동의 계산을 위해 계산에서 제외되는 비활성 격자요소들에 내삽과 외삽을 통해 적절한 유동값을 부여하여, 상대운동이 진행됨에 따라 다음 시간단계에서 새롭게 활성 격자로 분류될 때 이전 시간에서의 유동값으로 이용될 수 있도록 하였다. 해석기법을 이용하여 기존에는 해석이 불가능했던 3차원 날개의 내부에서 발사체가 사출되는 운동과 발사체의 동체에서 다수의 핀이 전개되는 운동을 해석하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권5호
• /
• pp.920-938
• /
• 2015

In the present study, a numerical prediction method on the hydrodynamic interaction force and moment between two ships in shallow and restricted waterway is presented. Especially, the present study proposes a methodology to overcome the limitation of the two dimensional perturbation method which is related to the moored-passing ship interaction. The validation study was performed and compared with the experiment, firstly. Afterward, in order to propose a methodology in terms with the moored-passing ship interaction, further studies were performed for the moored-passing ship case with a Reynolds Averaged Navier-Stokes (RANS) calculation which is using OpenFOAM with Arbitrary Coupled Mesh Interface (ACMI) technique and compared with the experiment result. Finally, the present study proposes a guide to apply the two dimensional perturbation method to the moored-passing ship interaction. In addition, it presents a possibility that the RANS calculation with ACMI can applied to the ship-ship interaction without using a overset moving grid technique.

• 한국전산유체공학회지
• /
• 제16권1호
• /
• pp.36-41
• /
• 2011

Numerical simulation of air-launched rockets from a helicopter was conducted to investigate the aerodynamic interference between air-launched rocket and helicopter. For this purpose, a three-dimensional inviscid flow solver has been developed based on unstructured meshes. An overset mesh technique was used to describe the relative motion between rocket and rocket launcher. The flow solver was coupled with six degree-of-freedom equation to predict the trajectory of free-flight rockets. For the validation, calculations were made for the impinging jet with inclined plate. The rotor downwash of helicopter was calculated and applied to simulation of air-launched rocket. It is shown that the rotor downwash has non-negligible effect on the air-launched rocket and its plume development.

• Ocean Systems Engineering
• /
• 제6권4호
• /
• pp.325-344
• /
• 2016

Using 3D computational fluid dynamics techniques in recent years have shed significant light on the Vortex Induced Vibrations (VIV) encountered by deep-water marine risers. The fatigue damage accumulated due to these vibrations has posed a great concern to the offshore industry. This paper aims to present an algorithm to predict the crossflow and inline fatigue damage for very long (L/D > $10^3$) marine risers using a Finite-Analytical Navier-Stokes (FANS) technique coupled with a tensioned beam motion solver and rainflow counting fatigue module. Large Eddy Simulation (LES) method has been used to simulate the turbulence in the flow. An overset grid system is employed to mesh the riser geometry and the wake field around the riser. Risers from NDP (2003) and Miami (2006) experiments are used for simulation with uniform, linearly sheared and non-uniform (non-linearly sheared) current profiles. The simulation results including inline and crossflow motion, modal decomposition, spectral densities and fatigue damage rate are compared to the experimental data and useful conclusions are drawn.

• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.405-412
• /
• 2017

In the present study, two phase flows around a projectile vertically launched from an underwater platform have been numerically investigated by using a three dimensional multi-phase RANS flow solver based on pseudo-compressibility and a homogeneous mixture model on unstructured meshes. The relative motion between the platform and projectile was described by six degrees of freedom(6DOF) equations of motion with Euler angles and a chimera technique. The propulsive power of the projectile was modeled as the fluid force acting on the lower surface of the body by the compressed air emitted from the platform. Qualitative analysis was conducted for the time history of vapor volume fraction distributions. Uncorking pressure around the projectile and platform was analyzed to predict impact force acting on the surfaces. The results of 6DOF analysis presented similar tendency with the surficial pressure distributions.

• 해양환경안전학회지
• /
• 제25권7호
• /
• pp.961-967
• /
• 2019

본 연구에서는 큰 침하량과 동적트림을 가지는 선박에 대하여 전산유체역학(CFD)을 기반으로 하여 효율적인 저항성능 추정 방법을 제시하였다. 본 방법에서 효율적이라 함은 점성 유동해석 이전에 비 점성 유동해석의 침하량과 동적트림 결과를 이용하여 선박의 큰 자세를 설정하고 DFBI(Dynamic Fluid Body Interaction) 방법에 의한 점성 유동해석을 수행한 것이다. 본 방법을 방법I로 명하였다. 방법I는 해석 전에 큰 자세를 설정함으로 인해 중첩격자(Overset Mesh) 기법을 사용하지 않는 단순한 격자시스템(Fig. 3 참고)을 사용하면 된다. 이로 인해 방법I는 계산시간 단축 및 계산의 정도를 높일 수 있는 장점이 있다. 점성 유동해석은 상용 CFD 코드인 STAR-CCM+를 사용하였다. 방법I의 첫 번째 점성 유동해석 결과는 최종 수렴된 결과와 비교하였을 때 저항 값에서 최대 1 % 내에서 차이를 보임을 확인 하였다. 중첩격자가 아닌 단순 격자시스템에 의한 STAR-CCM+에서 제공하는 DFBI 기법을 활용하여 계산단계 별로 변화된 자세에 대하여 매번 격자를 변경하여 수렴된 결과를 도출하였다. 본 방법을 방법II로 명하였다. 방법II의 저항 값과 비교하였을 때 방법I은 선속에 따라 0.03 % ~ 0.6 %의 차이를 보였다. 방법I의 결과는 수조모형시험과의 비교를 통해서 정성적 그리고 정량적으로 타당함을 확인하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권2호
• /
• pp.190-199
• /
• 2011

Unsteady flow simulations of complete helicopter configurations were conducted, and the flow fields and the aerodynamic interferences between the main rotor, fuselage, and tail rotor were investigated. For these simulations, a three-dimensional flow solver based on unstructured meshes was used, coupled with an overset mesh technique to handle relative motion among those components. To validate the flow solver, calculations were made for a UH-60A complete helicopter configuration at high-speed and low-speed forward flight conditions, and the unsteady airloads on the main rotor blade were compared to available flight test data and other calculated results. The results showed that the fuselage changed the rotor inflow distribution in the main rotor blade airloads. Such unsteady vibratory airloads were produced on the fuselage, which were nearly in-phase with the blade passage over the fuselage. The flow solver was then applied to the simulation of a generic complete helicopter configuration at various flight conditions, and the results were compared with those of the CAMRAD-II comprehensive analysis code. It was found that the main rotor blades strongly interact with a pair of disk-vortices at the outer edge of the rotor disk plane, which leads to high pulse airloads on the blade, and these airloads behave differently depending on the specific flight condition.

• 한국군사과학기술학회지
• /
• 제18권6호
• /
• pp.728-735
• /
• 2015

A gas gun system to replicate the flight motions of large caliber spin-stabilized ammunition has been investigated experimentally and numerically. The system is specially designed to study aerodynamic characteristics and dynamics of a flight body ejected from a cargo shell or a subsonic projectile itself at up to 2,000 rpm and 100 m/s. Raynolds-averaged Navier-Stokes equations with a overset mesh technique and 6-DOF dynamics were solved to decide the chamber pressure according to the muzzle velocity input by users. The predicted velocity values show less than 6 % of discrepancies compared to experimental data. The system has successfully been tested for the simulation of deployment of a parafoil for a 155 mm gun-launched projectile.

• 한국항공우주학회지
• /
• 제34권2호
• /
• pp.17-25
• /
• 2006

본 연구에서는 2차원 비정렬 중첩격자계를 이용한 서로 겹쳐진 물체간의 상대운동 해석기법을 개발하였다. 물체들이 교차되는 교차점에서 가장 가까운 거리에 있는 각 격자계의 물체 경계면에 위치한 격자점들을 교차점으로 이동시키고, 이 교차점을 기준으로 계산영역에 포함되는 격자와 계산에서 제외되는 격자가 구분되도록 하였다. 비정상 유동의 계산을 위해 계산에서 제외되는 비활성 격자점에 적절한 유동값을 부여하여, 상대운동이 진행됨에 따라 새롭게 활성 격자점으로 분류될 때 이전 시간에서의 유동값으로 이용될 수 있도록 하였다. 해석기법의 검증을 위해 단순플랩의 진동에 따른 에어포일 주위의 유동을 해석하여 타 연구자의 해석결과와 비교하였고, NACA0012 에어포일의 내부에서 사출되는 발사체의 운동에 대하여 해석을 수행하였다.

• 한국군사과학기술학회지
• /
• 제22권4호
• /
• pp.517-526
• /
• 2019

In the present study, unsteady flows around a projectile ejected from an aircraft platform have been numerically investigated by using a three dimensional compressible RANS flow solver based on unstructured meshes. The relative motion between the platform and projectile was described by six degrees of freedom(6DOF) equations of motion with Euler angles and a chimera technique. Initial behavior of the projectile for varying conditions, such as roll and pitch-yaw command on the control surface of the projectile, flight Mach number, and platform pitch angle, was investigated. The ejection stability of the projectile was degraded as Mach number increases. In the transonic condition, the initial behavior of the projectile was found to be unstable as increase of platform pitch angle. By applying the command to control surfaces of the projectile, initial stability was highly enhanced. It was concluded that the proposed simulation data are useful for estimating the ejection behavior of a projectile in design phase.