• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.74-75
• /
• 2015

Recently domestic youth unemployment rate has increased continuously. The cause is due to construction recession. As a result, the youth unemployment rate was approximately 8.0% in 2013. In particular, graduates of civil engineers and architecture engineers are difficult to find a new job. Major construction companies also prefer new employees rather than career employees. Therefore, the employment rate of construction-related university graduates is continuing decline. Accordingly, construction and technical engineers will be aging. Therefore, this study was looking for ways to promote the overseas expansion of young construction engineers. And this research has suggested the ways which young engineers can find a new job through improving the system.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.87-88
• /
• 2011

Construction projects that should be under the construction supervision regulation were decreased in 2008 and new supervision projects in 2010 were significantly reduced by 60% comparing to the ones as of 2009. On the contrast, the volume of world construction projects including Middle·South Asia and Africa is forecasting to be increased by 46% in 2018. However, although the needs of oversea expansion of domestic construction supervision firms are appeared more and more, their preparations to the strategically important areas in the world are insufficient. Thus, this paper aims to suggest directions of strategics and plans for domestic construction supervision industry to expand the market to the world through questionnaire surveys and expert investigation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.296-297
• /
• 2018

Due to the decrease in infrastructure investment and stagnation of overseas construction, it is concerned the instability of the construction market. Enhancing the Korean construction competitiveness, productivity improvement could be the breakthrough. In addition, defining construction contents utilizing virtual reality technology is drawing attention along with the trend of the fourth industrial revolution technology development toward the labor productivity improvement. This study conducted a survey to figure out the present state of the productivity management in field and comprehend the factors influence on construction productivity for further Korean construction productivity data platform.

• Spatial Information Research
• /
• 제20권6호
• /
• pp.119-127
• /
• 2012

u-City는 첨단 IT 인프라와 유비쿼터스 정보 서비스를 도시 공간에 융합하여 생활의 편의 증대와 삶의 질 향상, 체계적 도시 관리에 의한 안전 보장 등 도시의 제반 기능을 혁신시키는 차세대 도시이다. 현재 u-City 시장규모는 급속도로 성장하고 있으며 이를 한국만의 새로운 브랜드화하여 추진할 경우 건설기술과 더불어 공간정보기술, 센서기술, 통신망 구축, 관련 장비산업 등을 복합하여 동반 진출함으로써 막대한 시너지 효과를 창출할 수 있다. 따라서 본 연구에서는 u-City 구축 운영기술 및 관련 서비스, BIM/GIS 연계 활용 등의 측면에서 u-City 건설사업의 해외 진출 활성화를 위해 u-City와 관련된 국내외 시장 및 연구, 요소기술을 분석하고 진출 대상국의 선정 및 유형 분석, u-City 서비스의 패키지화 방안, BIM/GIS 연계 기술의 활용 등 u-City 해외진출 전략을 제시하였다.

• 한국건설관리학회논문집
• /
• 제10권5호
• /
• pp.3-15
• /
• 2009

최근 해외 건설시장 플랜트 분야의 수주 증대에 따라 오일 가스 분야의 프로젝트가 증가하고 있다. 따라서 국내 건설 산업 업체들의 해외 플랜트 사업의 경쟁력을 확보하기 위해서는 생산성 향상 기술 경쟁력 확보 전략적 경영 추진 등 적극적인 대처 방안 수립이 요구되고 있다. 그 중에서도 해외 플랜트 사업의 오일 가스 분야는 산업 경쟁력 향상을 위하여 프로젝트 수행과 관련한 EPC(Engineering Procurement Construction) 유통 정보의 활용이 더욱 요구되지만, EPC 단계별 다양한 업무에서 발생하는 유통정보 콘텐츠를 효율적으로 관리하기 위한 콘텐츠 분류체계가 제시되고 있지 못하고 있다. 그로 인하여 설계도면의 변경, 중복업무의 발생, 업무주제간의 정보 누락 등의 문제점이 발생하고 있다. 이런 문제점으로 인하여 시장점유율이 감소하고 있으며 경쟁력이 약해지고 있다. 따라서 본 연구는 오일 가스분야의 콘텐츠 관리체계의 실무적 활용의 증대와 건설산업 정보관리의 효용성을 향상시키기 위하여 콘텐츠 관리 체계를 확립하기 위한 BPM(Business Process Management) 기반의 콘텐츠 분류 체계를 제시하고, 국내기업의 경쟁력이 가장 낮은 설계단계의 Business Process를 정의하고 요구되는 지식의 유형을 체계화하고, 콘텐츠 정보를 분석하여 설계단계 산업설비 유통정보의 체계화를 지원하고자 한다.

• 한국산업융합학회 논문집
• /
• 제21권6호
• /
• pp.273-284
• /
• 2018

3D printing technology in the construction field is currently being developed and commercialized actively in foreign countries, but the development of material and equipment is underway as an initial research stage in Korea. It is necessary to implement commercialization through the introduction of 3D printing technology in the construction field as soon as possible in Korea, but there is no guideline for suitable equipment and materials in Korea at present. Therefore, in order to help prepare for commercialization, it is necessary to provide data such as equipment size and materials suitable for commercialization at the initial stage. This study investigates the types, specifications, and applications of equipment that are being used overseas to provide the equipment type and material cost required in the initial stage of commercialization in Korea. Using the surveyed data, it was possible to calculate the advantages and disadvantages of the equipment type and specification, and the cost of materials used. As a result of the analysis, Gantry type is suitable for the domestic commercialization, and the standard of the output area is $100m^2$ and the extrusion amount of $250m^3/sec$ is proposed, and the material cost of the commercial product is 20thousand won. The suggestions in this study will help to plan the construction of products and equipments to commercialize 3D printing technology in construction field in the future.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.169-171
• /
• 2012

Although work-efficiency of construction machinery is a critical factor for estimating its workable-quantity per unit time, the coefficient figure table presented in the Poom-Sam that is used for Construction Cost Estimation of public sectors in Korea is very subjective for practical usage. In order to suggest objective work-coefficient table for a Tub Grinder, domestic and overseas documentary records were investigated and on-going construction sites were also visited. The research found that the table can be revised by means of detailing down by several factors. The research will be the foundation for applying the rapid development of Construction Equipment and technology to the appropriate cost estimations and the ground work of related studies.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 2부
• /
• pp.103-108
• /
• 2010

The purpose of this study is to analyze of the risk factors for oversea plants construction projects. For this study, risk factors data from related literature review, research organization and construction company was researched and classified under each EPC phases. In addition, a questionnaire survey by plant experts was conducted for analysis of risk weight and costs and time impact on each EPC phases. The results of this study are as follows: First, a detail design errors(engineering phase), a equipment procurement plan(procurement phase), and exchange rate fluctuations(construction phase) were analyzed the highest weight factors. Second, a financing plan(engineering phase), quantity take-off bill(procurement phase), and exchange rate fluctuations(construction phase) were analyzed the highest cost impact factors. Third, detail design errors(engineering phase), a equipment procurement plan(procurement phase), and schedule management errors(construction phase) were analyzed the highest time impact factors.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.587-592
• /
• 2009

Construction companies in Korea have shown interest in BIM (Building Information Modeling) even if late, adopted it, and applied it to several projects. But, it is hard to figure out the status of BIM implementation. Thus, this study is to figure out the status of BIM implementation in Korea by surveying major construction companies in Korea and comparing with similar surveys abroad. The survey result shows that only 11 companies in Korean construction industry adopted BIM. The clash check (73%) was mostly used among various BIM functions and other functions were used less than 30%. As of 2008, only 8 construction companies have used BIM in 27 projects and thus, Korean companies are in the BIM introduction period. Therefore, successful introduction of BIM is required by benchmarking the BIM introduction process of overseas construction industries

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.700-701
• /
• 2015

Nuclear power plant construction project can be called essential to establish a systematic project management system compared to other construction projects, taking into account the size and complexity and safety. To develop into a project management system for the Korea situation with the ongoing construction of the nuclear power plant was directed to promote nuclear power project management. In this paper, we introduce a comprehensive project management system for nuclear power projects. Currently considering the nuclear life cycle design, construction, and was developed by considering the flow of information to operate, and test each step linkage. The systems in English were developed to meet owner's requirements for advancing into overseas projects. Another point is that the systems were developed by management module, so that functions of each area can be selectively applied. It is expected that the system will establish itself as one that can be used for the entire lifecycle of nuclear power plants through gradual and systematic establishment of necessary data.