• 한국해양공학회지
• /
• 제11권3호
• /
• pp.76-88
• /
• 1997

Constant .DELTA.K fatigue crack growth rate experiments were performed by applying an intermediate single and multiple overload for structural steel, SM45C. The purpose of the present study is to investigate the influence of multiple overloads at various stress intensity factor ranges and the effect of statistical variability of crack retardation behavior. The normalized delayed load cycle, delayed crack length and the minimum crack growth rate are increased with increasing baseline stress intensity factor range when the overload ratio and the number of overload application were constant. The crack retardation under low baseline stress intensity factor range increases by increasing the number of overload application, but the minimum crack growth rate decreases by increasing the number of overload application. A strong linear correlation exists between the minimum crack growth rate and the number of overload applications. And, it was observed that the variability in the crack growth retardation behavior are presented, the probability distribution functions of delayed load cycle, delayed crack length and crack growth life are 2-parameter Weibull. The coefficient of variation of delayed load cycle and delayed crack length for the number of 10 overload applications data are 14.8 and 9.2%, respectively.

• 한국통신학회논문지
• /
• 제21권4호
• /
• pp.952-960
• /
• 1996

In this paper, a new overload control scheme is proposed for a control system in ATM switching system. The proposed control scheme includes a counter that conunts the number of accepted calls and is decreased at cach D time interval. In overload condition of call processor, the control scheme detects over load condition when the counter value reaches a certain threshold value. Under overload condition, processor utilization is measured and the value of the D is updataed according to the difference between measured processor utilization and target utilization. A new call is accepted accepted only if the value of the counter is less than the threshold value. In overflow condition of cell traffic, accept probability of new call is reduced exponetially according to the elapsed time. The results of simulation show that the proposed overload contorl scheme maintains the target utilization very well under the various processor overload conditions and reduces the cell loss probability under the cell overflow conditions.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권2호
• /
• pp.125-134
• /
• 2003

교량의 현 내하력을 평가하기 위해서 사용되는 방법으로 허용응력 평가법(ASR), 하중계수평가법 (LFR) 등의 방법 등이 사용되고 있다. 현재, 교랑 평가 값을 이용하여 이 값을 확률이론에 연결시키려는 시도들이 많이 연구되고 있다. 본 논문의 주목적은 교량의 내하력 평가값 (Rating Factor)과 확률이론을 이용하여, 과하중 확률을 구하는데 있습니다. 본 논문에서는 이러한 평가 방법들을 요약 설명하고, Weigh-in-Motion에 의해 얻은 활하중 모델을 도입하여, 교량 평가 값을 확률이론에 연결 시켰다. 활하중 모델과 교량 내하력 값을 토대로, 초과 하중 확률을 계산하고, 그 방법을 설명하였다.

• Journal of applied mathematics & informatics
• /
• 제8권1호
• /
• pp.285-295
• /
• 2001

We consider a queueing system under overload control to support bursty traffic. The queueing system under overload control is modelled by MMBP/D1/K queue with two thresholds on buffer. Arrival of customer is assumed to be a Markov-modulated Bernoulli process (MMBP) by considering burstiness of traffic. Analysis is done in discrete-time case. Using the generating function method, we obtain the stationary queue length distribution. Finally, the loss probability and the waiting time distribution of a customer are given.

• Communications for Statistical Applications and Methods
• /
• 제7권2호
• /
• pp.499-511
• /
• 2000

We consider a stable tandem network which consists of two M/M/1 nodes and study the probability that the total backlog exceeds a large level N. Since the excessive backlog is a rare event, it is difficult to estimate this probability efficiently by using the crude Monte Carlo simulation. Instead we perform the ;$h$-transform proposed by McDonald(1999) to obtain the twisted network, in which the node with the larger load is overloaded. Then we use it to run the fast simulation.

• 산업공학
• /
• 제13권4호
• /
• pp.738-744
• /
• 2000

This Paper presents a method for unfinished work transition probability distribution of modulated $n^*D/D/l$ queue with overload period. The Modulated $n^*D/D/l$ queue is well known as a performance analysis model of ATM multiplexer with superposition of homogeneous periodic on-off traffic sources. Theory of probability by conditioning and results of $N^*D/D/l$ queue are used for analytic methodology. The results from this paper are expected to be applied to general modulated $n^*D/D/l$ queue.

• 전자공학회논문지A
• /
• 제32A권4호
• /
• pp.32-39
• /
• 1995

In this paper, a timer thresholds tuning algorithm is proposed, satisfying the required response time for traffic with time-critical applications and asynchronous traffic in FDDI network. Under light and medium load, priorities and timer thresholds play a minor role for medium access control. In these cases all quenes are served exhaustively with a ver high service probability and the packet loss probability approaches almost zero. Under overload condition, however, the performance of the FDDI Network is completely determined by the selection of the timer thresholds. The timer thresholds tuned by mathematical results is confirmed by simulation results using SIMAN/UNIX package. The allocation of guaranteed bandwidth can be controlled easily by tuning the timer thresholds according to the proposed rules.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권7호
• /
• pp.273-280
• /
• 2006

This paper suggests the method that forecasts Dynamic Line Rating (DLR). Thermal Overload Risk Probability (TORP) of the next time is forecasted based on the present weather conditions and DLR value by Monte Carlo Simulation (MCS). To model weather elements of transmission line for MCS process, this paper will propose the use of statistical weather models that time series is applied. Also, through the case study, it is confirmed that the forecasted TORP can be utilized as a criterion that decides DLR of next time. In short, proposed method may be used usefully to keep security and reliability of transmission line by forecasting transmission capacity of the next time.

• Safety and Health at Work
• /
• 제13권2호
• /
• pp.207-212
• /
• 2022

Background: The public now imposes higher demands on the government than in the past, which has created the role overload faced by low-ranking government employees in China. This research investigates the relationship between role overload and health among low-ranking government employees and explores the mediating effects of burnout. Methods: It draws on a survey of 2064 low-ranking government employees by probability proportionate to size sampling in China's Shandong Province. Structural equation modeling (SEM) methods are used to analyze the data. Results: Both role overload and burnout were found to have negative effects on low-ranking government employees' health; however, the associations varied among the three age groups (less than 36, between 36 and 45, and over 45). Those over 45 reported the highest level of both physical and psychological health, while the youngest age group (less than 36) reported the lowest level of health. Role overload has a direct influence on health among government employees over 45 but not among those below 45. Burnout's mediating effects between role overload and health are significant among all age groups, but most significant among the youngest civil servants below 36. Conclusions: The findings evidenced that both role overload and burnout affect low-ranking government employees' self-reported physical and psychological health. In addition, the effect of age differences in coping with role stressors and burnout should be considered.

• 한국통신학회논문지
• /
• 제18권1호
• /
• pp.110-122
• /
• 1993

음성이 패킷망을 통해 전송될때 각각의 call들에 의해서 발생되는 패킷들은 statistical multiplexer에 의해 다중화 되는데 이때 overload control이 필요하다. Overload control 방식은 음성 traffic을 coding하는 방식과 밀접한 관계가 있으며 그동안 많은 연구가 진행되어 왔다. CCITT에서는 최근에 packetized voice protocol에 대한 권고안 초안인 G.764를 작성하였는데 여기에서 embedded coding을 사용하는 경우에 bit dropping 방식을 사용하면 매우 훌륭하게 overload control을 할 수 있다는 사실을 언급하였다. 이에 따라 본 논문에서는 음성을 embedded ADPCM으로 coding하여 CCITT권고안 G.764에 따라 전송하는 경우에, bit dropping 방식에 따른 overload control 방식을 사용하는 패킷 multiplexer의 성능을 분석하고자 한다. 성능 분석을 위해서는 먼저 multiplexer에 도착하는 중첩된 packet arrival process에서 패킷들의 interarrival time들 간에 존재하는 큰 correlation을 정확히 나타낼 수 있는 수학적인 model이 필요하다. 본 논문에서는 Poisson process나 birth-and-death process에 비해 이들 packet arrival process를 상대적으로 정확히 표현할 수 있는 Makov-modulated Poisson Process(MMPP)를 사용하여 모델링을 하였다.따라서 성능분석은 MMPP/G/1 queueing system에 대한 분석과 비슷하다. 다만 서비스 시간의 분포가 시스템의 상태에 따라 달라지는데 이러한 경우에 대해서는 기존의 논문에서 분석되지 않았다. 성능분석을 통하여 queue에서 서비스를 기다리는 패킷의 수에 대한 분포의 Z-transform을 구하고 이를 이용하여 임의의 시간에서의 queue length와 waiting time의 평균과 표준편차를 구하였다. 이를 통하여 bit dropping 방식에 의한 overload control이 음성의 질을 많이 저하시키지 않으면서도 overload control을 하지 않을 때에 비해 statistical multiplexer에서 훨씬 많은 수의 call을 수용할 수 있도록 하는 효과를 가진다는 사실을 확인 하였다. 또한 패킷이 queue에서 떠난 직후와 임의의 시간에서 구한 queue length와 waiting time의 평균과 표준편차가 매우 비슷하다는 사실을 알 수 있었다. 본 논문에서와 마찬가지로 임의의 시간에서의 분석은 매우 복잡한 경우가 대부분이므로 이러한 사실을 이용하면 매우 간단히 성능분석을 할 수 있을 것이다.