• 구강회복응용과학지
• /
• 제24권3호
• /
• pp.269-281
• /
• 2008

골유착성 임플란트 보철물에서 피로나 과하중에 의해 보철유지 나사나 지대주 나사의 파절, 보철물의 파절, 또는 고정체의 파절 등과 같은 기계적 강도와 연관된 문제점이 발생할 가능성이 높다. 임플란트 시스템의 기계적인 강도에 영향을 주는 요소에는 고정체와 나사의 직경, 재료적 특성, 연결부 디자인, 지대주 디자인 등이 있으며, 이 중 임플란트 고정체와 지대주간의 연결부 디자인은 임플란트 시스템의 기계적인 연결상태와 연결부 안정성을 결정하는 주요소이다. 대부분의 기계적 강도에 관한 연구에서처럼 단일하중에 의한 압축굽힘강도나, 단기적인 반복하중 후의 결과만을 평가하여 임플란트 시스템의 장기적인 안정성을 예측하기에는 한계가 있다. 연구 목적: 이에 본 연구에서는 external butt joint와 internal conical joint를 갖는 임플란트 시스템(오스템사)의 연결부 디자인에서 각각 다른 두 가지 지대주를 사용하여, 연결부 및 지대주 디자인이 기계적 강도에 미치는 영향을 압축굽힘강도는 물론 내구성한계를 측정하여 알아보고자 하였다. 연구 재료 및 방법: External butt joint인 US II에서는 통상적인 UCLA 지대주 형태의 Cemented abutment(BJT)와 굽힘 저항성을 증가시키기 위해 나사 두부가 지대주 상단에 위치하도록 설계된 Safe abutment(BJS)를, internal conical joint인 SS II에서는 one-piece형의 Solid abutment(CJO)와 two-piece형의 ComOcta abutment(CJT)를 지대주로 사용하였다. ISO 규정을 참고하여 단일 임플란트, 변연골 흡수, 그리고 $30^{\circ}$ 경사하중 조건에서 압축굽힘강도와 내구성한계를 측정하였고 실패 양상을 관찰한 결과 다음과 같은 결론을 얻었다. 결과 및 결론: 1. 압축굽힘강도는 BJS군(1392.0N), CJO군(1261.8N), BJT군(1153.2N), 그리고 CJT군(1110.2N) 순으로 낮아졌으며(P<.05), CJT군과 BJT군 사이에는 차이가 없었다(P>.05) 2. 내구성한계는 CJO군(600N), CJT군(453N), BJS군(360N) 그리고 BJT군(300N) 순으로 낮아졌다. 3. 압축굽힘강도는 연결부 디자인 또는 지대주 디자인에 따라 차이를 보였으며, 내구성한계에 있어서는 연결부 디자인이 더 주된 요소로 작용하였다.

• 가정과삶의질연구
• /
• 제23권1호
• /
• pp.85-98
• /
• 2005

The purpose of this study is to make it clear that the influence the adults' work-family conflicts affect the family life satisfaction and the work life satisfaction of theirs, according to the personal backgrounds (sex, age, monthly income and whether the person works S days a week or not). The target group of this study is the selected 754 adults who are married with children that are in the employ of the various companies in Seoul and Incheon. The picked data are analyzed to factor analysis, frequencies, means, One-way ANOVA and multiple regression analysis etc..using Spss 11.5 version statistical program. Following is the result of the study: First, the level of work-family conflicts have been shown to be different as the result of verification by sex, age, monthly income and the type of duty(whether working 5days a week or not) out of the personal variables. The study shows that the level of work-family conflicts is different by the subordinate variables of work-family conflicts as the results of male and female comparison. And the older the age, the higher the level of family conflicts.'rho study shows that The level of the places of work conflicts is the highest in the 30s. The smaller monthly income, the higher the level of work-family conflicts. The study shows that the level of family conflicts is high in working 6days a week and the level of work conflicts is high in working 5days a week. Second, such factors for conflicts at home as family support, family expectations and financial difficulties affect the level of satisfaction at work, while such personal backgrounds as monthly pay, kinds of work and age level also play a role. At the same time, satisfaction in family life is influenced by such factors for conflicts at the places of work as support, involvement, expectations and work-overload at the places of work, with such personal backgrounds as monthly pay, age and sex compounding the impact. On the point how much conflicts at work and home affect the satisfaction at home, work and leisure, the study shows that family life does not have noticeable influence in the level of satisfaction at the places of work, whereas situations at the place of work have significant impact on the level of satisfaction in family lives. In other words, the lesser conflicts the work situations cause to family lives, the greater the level of satisfaction at work, home and at leisure.

• 한국항공우주학회지
• /
• 제47권9호
• /
• pp.607-616
• /
• 2019

항공우주비행체 정적구조시험을 위한 과하중 방지를 위해 사용되는 하중제한밸브(LLV)의 파일럿 스테이지의 주요 구성품들에 대한 자유물체도 분석을 수행하였다. 이 분석을 통하여 유압작동기의 동일한 힘에서 일관성있게 포펫 개방되도록 하기 위해서는 파일럿스테이지에 있는 두 포펫의 직경비($(D_2)^{ten}/D_2)^{comp}$)가 작동기의 피스톤 면적비($A_{comp}/A_{ten}$)와 동일해야만 한다는 것을 보였다. 실험실에서 외산으로 수입하여 사용하고 있는 4개의 서로 다른 하중제한밸브의 포펫들 형상을 측정하고 대응되는 4개의 다른 용량을 갖는 유압작동기들의 피스톤 면적비들로부터 위의 분석결과가 타당함을 확인하였다. 두 개의 다른 파일럿스테이지로 수행한 "조절자 분해능시험들"의 결과들로부터 조절자 각 회전에서 얻은 Fi(포펫개방 순간의 작동기 힘)의 최대 표준편차는 각 평균값으로부터 0.3KN이고 표준편차를 각 평균값으로 나눈 무차원값으로 분석하면 최대편차는 3.7%이다. 이 결과로 부터 동일 포펫 직경비를 갖는 두 개의 파일럿스테이지들의 포펫은 각 조절자 회전에 대해 Fi/(평균 Fi) 값이 +/- 3.7% 범위에서 일관성 있게 개방되고 있음을 확인하였다. 위의 편차는 포펫 O-링의 마찰력으로부터 유발되는 것임을 보였다. 부가적으로 파일럿스테이지의 다른 주요부품인 포펫 스프링과 조절자의 주요설계인자들도 식별하였고 이들의 결정과정도 본 연구에서 보였다.

• Asia pacific journal of information systems
• /
• 제19권1호
• /
• pp.33-62
• /
• 2009

Internet computing is a disruptive IT innovation. Semantic Web can be considered as an IT innovation because the Semantic Web technology possesses the potential to reduce information overload and enable semantic integration, using capabilities such as semantics and machine-processability. How should organizations adopt the Semantic Web? What factors affect the adoption and diffusion of Semantic Web innovation? Most studies on adoption and diffusion of innovation use empirical analysis as a quantitative research methodology in the post-implementation stage. There is criticism that the positivist requiring theoretical rigor can sacrifice relevance to practice. Rapid advances in technology require studies relevant to practice. In particular, it is realistically impossible to conduct quantitative approach for factors affecting adoption of the Semantic Web because the Semantic Web is in its infancy. However, in an early stage of introduction of the Semantic Web, it is necessary to give a model and some guidelines and for adoption and diffusion of the technology innovation to practitioners and researchers. Thus, the purpose of this study is to present a model of adoption and diffusion of the Semantic Web and to offer propositions as guidelines for successful adoption through a qualitative research method including multiple case studies and in-depth interviews. The researcher conducted interviews with 15 people based on face-to face and 2 interviews by telephone and e-mail to collect data to saturate the categories. Nine interviews including 2 telephone interviews were from nine user organizations adopting the technology innovation and the others were from three supply organizations. Semi-structured interviews were used to collect data. The interviews were recorded on digital voice recorder memory and subsequently transcribed verbatim. 196 pages of transcripts were obtained from about 12 hours interviews. Triangulation of evidence was achieved by examining each organization website and various documents, such as brochures and white papers. The researcher read the transcripts several times and underlined core words, phrases, or sentences. Then, data analysis used the procedure of open coding, in which the researcher forms initial categories of information about the phenomenon being studied by segmenting information. QSR NVivo version 8.0 was used to categorize sentences including similar concepts. 47 categories derived from interview data were grouped into 21 categories from which six factors were named. Five factors affecting adoption of the Semantic Web were identified. The first factor is demand pull including requirements for improving search and integration services of the existing systems and for creating new services. Second, environmental conduciveness, reference models, uncertainty, technology maturity, potential business value, government sponsorship programs, promising prospects for technology demand, complexity and trialability affect the adoption of the Semantic Web from the perspective of technology push. Third, absorptive capacity is an important role of the adoption. Fourth, suppler's competence includes communication with and training for users, and absorptive capacity of supply organization. Fifth, over-expectance which results in the gap between user's expectation level and perceived benefits has a negative impact on the adoption of the Semantic Web. Finally, the factor including critical mass of ontology, budget. visible effects is identified as a determinant affecting routinization and infusion. The researcher suggested a model of adoption and diffusion of the Semantic Web, representing relationships between six factors and adoption/diffusion as dependent variables. Six propositions are derived from the adoption/diffusion model to offer some guidelines to practitioners and a research model to further studies. Proposition 1 : Demand pull has an influence on the adoption of the Semantic Web. Proposition 1-1 : The stronger the degree of requirements for improving existing services, the more successfully the Semantic Web is adopted. Proposition 1-2 : The stronger the degree of requirements for new services, the more successfully the Semantic Web is adopted. Proposition 2 : Technology push has an influence on the adoption of the Semantic Web. Proposition 2-1 : From the perceptive of user organizations, the technology push forces such as environmental conduciveness, reference models, potential business value, and government sponsorship programs have a positive impact on the adoption of the Semantic Web while uncertainty and lower technology maturity have a negative impact on its adoption. Proposition 2-2 : From the perceptive of suppliers, the technology push forces such as environmental conduciveness, reference models, potential business value, government sponsorship programs, and promising prospects for technology demand have a positive impact on the adoption of the Semantic Web while uncertainty, lower technology maturity, complexity and lower trialability have a negative impact on its adoption. Proposition 3 : The absorptive capacities such as organizational formal support systems, officer's or manager's competency analyzing technology characteristics, their passion or willingness, and top management support are positively associated with successful adoption of the Semantic Web innovation from the perceptive of user organizations. Proposition 4 : Supplier's competence has a positive impact on the absorptive capacities of user organizations and technology push forces. Proposition 5 : The greater the gap of expectation between users and suppliers, the later the Semantic Web is adopted. Proposition 6 : The post-adoption activities such as budget allocation, reaching critical mass, and sharing ontology to offer sustainable services are positively associated with successful routinization and infusion of the Semantic Web innovation from the perceptive of user organizations.

• 한국직업건강간호학회지
• /
• 제6권1호
• /
• pp.23-43
• /
• 1997

The work-related diseases due to continuous overwork are mainly cerebro- and cardio-vascular ones, which is commonly called 'Karoshi', death from overwork. Many factors are capable for Karoshi : occupational stress in relation to technological renovation and industrial rationalization, competitive social structure, and accumulated fatigue accured to long time or irregular working. And its occurence is on the rise. The World Labor Report 1993 released by ILO, pointed out the diseases related to overwork and stress as one of the most important occupational health problem. In Korea, social awareness of Karoshi is at an infant stage, and reliable statistics for its occurence are not compiled in a convenient manner. Despite the rising Karoshi, there are no reliable clauses in workmen's compensation enough to settle down the disputes. Therefore, it is not uncommon that the Labour Ministry and Civil Court find difficulties in reaching an agreement. This study was intended to provide proper compensation and prevention program for workers by suggesting reasonable compensation clauses for the death from overwork. This study consists of two comparative reviews on the compensaton clauses for the death from overwork. One is to review legal standards of Karoshi among three countries, such as Korea, Japan and Taiwan. The other is to investigate the cases of Karoshi in Korea, 121 cases identified at the Labor Welfare Corperation and the Labour Ministrial process of examination and reexamination, and 73 leading cases at the High Court of Justice. The main findings of the study are as follows : 1. Comparisons of comperative review on compensation clauses for the death from overwork among three countries. 1) All of three countries have the same kinds of disease for compensation, which were cerebro-and cardiao-vascular diseases, while for cardiac disease group, Korea has the smaller number of diseases for compensation than Japan. 2) As for the definition of overwork, the three countries share equally that overload for one week prior to collapse is considered as an important factor, but accumulated chronic fatigue is disregarded. 3) As the basis of overwork, in Japan, there is a tendency to move from the conditions of an ordinary healthy adult to those of the individual concerned in Japan, whereas there is no such concern yet in Korea. 4) All the three countries use a common standard of medical judgement in demonstrating causal relationship between a job and a disease. However, Korea is progressive in the sense that in the case of CVA at worksite, the worker himself has no obligation to prove the cause. 2. The results of a comparative review on excutive decisions by Labor Ministry and judicial decisions by the Court in Korea : A judicial decision is based on the legalistic probability, but a excutive decision is not. Therefore, excutive decisions have such restrictions that : 1) TIA (transitory ischemic cerebral attack) and myocarditis are excluded from compensation, and there is little consistency of decision in the case of cause-unknown death. 2) There is a tendency not to compensate for the death from overwork since the work terms such as repeated long-time working, shift work or night-shift work are not considered as overloading. 3) There is a tendency to regard the conditions of a ordinary healthy adult rather than those of the individual concerned(age, existing diseases, health state, etc.) as the comparative basis of overload. 4) There remains a tendency not to compensate for the death from overwork in the case of collapse occuring out of workplace, on the ground of 'on the course of working' and 'in the cause of accident'. Through the study, the fact manifests itself that Korea's compensation clauses for work-related diseases due to overwork are very restrictive. So, it is necessary to extend the Labor Ministry's clauses of compensation for the death from overwork following to the recent changes of other countries and internal judicial decisions. This is very important in the perspective of occupational health that aims at health promotion of workers including prevention of the Karoshi.

• 성인간호학회지
• /
• 제12권1호
• /
• pp.99-111
• /
• 2000

The purpose of this study was to identify risk factors related to sexual function of women with coronary artery disease, and to determine the predictors of sexual function. The study design, a descriptive correlational study, was done through structural questionnaire and interview. A total of 50 subjects from C University Hospital at Kwang-ju city who have undergone coronary angiography at department of cardiology were observed and interviewed from Feb. 22, 1999 to March. 23, 1999. The number of affected vessels, the level of total serum cholesterol, and the ejection fraction of 2-D echo cardiography were analyzed to evaluate the severity of coronary artery disease. And also type A behavior pattern, health behavior, Brief Index of Sexual Functioning for Women (BISF-W) were measured. The data obtained were analyzed using percentage, mean and standard deviation, t-test, ANOVA, Pearson's correlation coefficient, and stepwise multiple regression analysis via SPSS PC+. The results of this study were as follows: 1. The mean age of the subjects were 58.1 and 72.0% of those have been married over 30 years. Seventy two percentage were unemployed and monthly family income of 56.6% was less than 1,000,000 won (approximately $ 840). Eighty percent were in their postmenopausal state, and the frequency of sexual intercourse of 84.0% were two to three times per month. 2. The scores of type A behavior pattern were from 16 to 38(mean 24.94) and health behavior ranged from 21 to 43(mean 31.2). Abstinence from smoking, alcohol, and caffeine were best compliant factors and weight control and exercise were least abided ones. The result of 2D-ECHO EF showed that the half of the subjects were abnormal, and 24% had more than 240mg/dl of total serum cholesterol. The coronary angiography showed that 64% of the subjects had more than one affected vessels. 3. The predictors to explain the factor score of 'orgasm' were number of health examination, the pre- or post-menopausal state, protestant, number of coronary vessel affected, level of serum total cholesterol, and comorbid group of hypertension and diabetes, and it's total variance accounted for 52.4%. The predictors to explain the factor score of 'sexual activity' were comorbid group of hypertension and diabetes and type A behavior pattern, which accounted for 22.4% of total variance. The predictors to explain the factor score of 'sexual satisfaction' were type A behavior pattern, no religion, exercise, level of serum total cholesterol, and pre or post menopausal state, which accounted for 52.1%. The predictors to explain the factor score of 'sexual desire' were the period of marriage, type A behavior, employment or unemployment, and weight control, which accounted for 43.2%. The predictors to explain the factor score of 'external force of sexual functioning' were physical overload and exercise, which accounted for 41.1%. The predictors to explain the factor score of 'sexual activity' were family monthly income, catholics, and exercise, and which accounted for 35.4%. Above results lead us to some consensus that sexual function of women with coronary artery disease is related to various factors including vasogenic factors such as total serum cholesterol level, number of coronary vessel affected, an endocrinal factor such as menopausal state, and type A behavior pattern as a sociopshychological factor. And also health behaviors such as fitness care, overwork, weight control, and emotional tension are contributed to sexual function.

• Tuberculosis and Respiratory Diseases
• /
• 제44권1호
• /
• pp.183-190
• /
• 1997

Tocolytics 임신부의 조기진통시 치료제로 많이 사용되는 약제지만 드물게는 폐부종을 일으켜 치명적일 수 있다. Tocolytics가 폐부종을 일으키는 기전은 용적증가, 교질삼투압의 감소, 심근 손상, 모세혈관 내막의 손상등에 의해 발생한다고 설명되고 있으나 아직 불확실한 상태이며 폐부종 발생의 양대 기전인 정수압적 폐부종과 투과성 폐부종의 양상이 모두 관여하는 것으로 알려져 있다. 또한 임산부가 다산부이거나 다태아 임신인 경우, 임신중 수액공급을 많이 받은 경우, 심장 질환이 동반된 경우, 감염이 동반된 경우, 동시에 steroid나 MgSO4로 치료 받은 경우등이 tocolytics 사용시 폐부종이 쉽게 발생될 수 있는 선행요인으로 작용함이 알려져왔다. 저자들은 조기진통이 있어 tocolytics인 ritodrine 치료후 정상분만하였으나 분만후 급속히 진행하는 폐부종이 발생한 30세 여자 환자를 경험하였기에 문헌고찰과 함께 보고하는 바 이다.

• 정보교육학회논문지
• /
• 제24권2호
• /
• pp.177-188
• /
• 2020

본 연구는 플립드러닝 환경에서 초등 교사가 지각하는 테크노스트레스와 관련 변인 간 관계를 살펴보는 데 목적이 있다. 연구 목적 달성을 위한 연구 문제는 다음과 같다. 첫째, 초등 교사가 지각하는 테크노스트레스의 차이는 어떠한가? 둘째, 초등 교사가 지각하는 테크노스트레스 관련 변인의 차이는 어떠한가? 셋째, 초등 교사가 지각하는 TPACK의 정도와 교사효능감, 학교 환경 지원은 테크노스트레스에 어떠한 영향을 주는가? 본 연구를 위하여 플립드러닝 수업을 운영한 경험이 있는 초등 교사 207명을 대상으로 설문조사를 실시하였다. 테크노스트레스, TPACK, 교사효능감, 학교 환경 지원으로 구성된 연구도구를 활용하였으며, 독립표본 t 검정, ANOVA, 중다회귀분석을 실시하였다. 본 연구의 결과는 다음과 같다. 첫째, 선도학교에서 근무하는 교사가 지각하는 테크노과부하, 테크노복잡성은 높다. 둘째, 교사의 경력, 선도학교 근무 여부에 따라 TPACK, 교사효능감, 학교 환경 지원의 지각 정도에 차이가 있다. 셋째, TK, TCK, TPACK 그리고 교사효능감의 교육 지원과 학교 환경 지원의 테크놀로지 어포던스는 테크노스트레스와 정적인 관계가 있다. 본 연구의 결과는 플립드러닝 환경에서 초등 교사의 테크노스트레스 감소를 위한 기초 자료를 제시하였다는 점에서 의의가 있다.

• 대한치과보철학회지
• /
• 제40권5호
• /
• pp.507-524
• /
• 2002

Load transfer of implant overdenture varies depending on anchorage systems that are the design of the superstructure and substructure and the choice of attachment. Overload by using improper anchorage system not only will cause fracture of the framework or screw but also may cause failure of osseointegration. Choosing anchorage system in making prosthesis, therefore, can be considered to be one of the most important factors that affect long-term success of implant treatment. In this study, in order to determine the effect of anchorage systems on load transfer in mandibular implant overdenture in which 4 implants were placed in the interforaminal region, patterns of stress distribution in implant supporting bone in case of unilateral vertical loading on mandibular left first molar were compared each other according to various types of anchorage system using three-dimensional photoelastic stress analysis. The five photoelastic overdenture models utilizing Hader bar without cantilever using clips(type 1), cantilevered Hader bar using clips(type 2), cantilevered Hader bar with milled surface using clips(type 3), cantilevered milled-bar using swivel-latchs and frictional pins(type 4), and Hader bar using clip and ERA attachments(type 5), and one cantilevered fixed-detachable prosthesis(type 6) model as control were fabricated. The following conclusions were drawn within the limitations of this study, 1. In all experimental models. the highest stress was concentrated on the most distal implant supporting bone on loaded side. 2. Maximum fringe orders on ipsilateral distal implant supporting bone in a ascending order is as follows: type 5, type 1, type 4, type 2 and type 3, and type 6. 3. Regardless of anchorage systems. more or less stresses were generated on the residual ridge under distal extension base of all overdenture models. To summarize the above mentioned results, in case of the patients with unfavorable biomechanical conditions such as not sufficient number of supporting implants, short length of the implant and unfavorable antero-posterior spread. selecting resilient type attachment or minimizing distal cantilever bar is considered to be appropriate methods to prevent overloading on implants by reducing cantilever effect and gaining more support from the distal residual ridge.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제34권5호
• /
• pp.571-577
• /
• 2008

Introduction: Possible etiologic factors associated with bone loss around implants after implantation are surgical trauma, occlusal overload, periimplantitis, presence of micro gap and the formation of biologic distances. Tarnow et al. observed that the crestal bone loss was greater when the distance between the implants was <3mm than when the implants were ${\geq}\;3mm$ apart. The aim of this study was to evaluate the influence of different interimplant distance on marginal bone and crestal bone resorption in the beagle dogs. Materials and methods: The mandibular premolars of 5 dogs were extracted bilaterally. After 12 weeks of healing, each dog received 7 implants. On each side, implants were separated by 2mm (Group 1) and by 5mm (Group 2). After 16 weeks of healing, the dogs were sacrificed. Marginal bone loss was determined through linear measurements made between the implant-abutment junctions and the most coronal portions of the bone in contact with the implant surface. A line was drawn uniting the implant-abutment junctions of the adjacent implants, and a linear measurement was made at the midpoint in the direction of the most coronal peak of the interimplant bone crest to determine the crestal bone loss. Both of them was measured radiologically and histologically. Result and conclusion: In radiological analysis, the mean of marginal bone loss was $1.26{\pm}0.14mm$ for group 1 and $1.23{\pm}0.34mm$ for group 2, the mean of crestal bone loss was $1.10{\pm}0.14mm$ for group 1 and $1.02{\pm}0.30mm$ for group 2. The results were not statistically significant between 2 groups. In histological analysis, the mean of marginal bone loss was $1.63{\pm}0.48mm$ for group 1 and $1.62{\pm}0.50mm$ for group 2, the mean of crestal bone loss was $1.23{\pm}0.35mm$ for group 1 and $1.15{\pm}0.39mm$ for group 2. The differences were also not statistically significant. The clinical significance of this result is that the increase in the crestal bone loss results in the increase in the distance between the base of the interproximal contact of the crowns and the bone crest, and this determines if papilla will be present or absent between implants. Considering this fact, keeping up sufficient interimplant distance is important to minimize crestal bone loss.