• Journal of Welding and Joining
• /
• v.25 no.1
• /
• pp.30-36
• /
• 2007

A joining of dissimilar metal combination faces significant problems such as poor strength and cracking associated with brittle intermetallic compounds(IMC) formed. An application of laser allows low heat input; leading to less dilution and smaller heat affected zone. The $CO_2$ laser overlay was conducted on an AC2B alloy with feeding Fe-based powders. The overlay area was significantly influenced from the travel velocity rather than the powder feeding rate. The interface between the overlay and substrate consisted of the hard and brittle IMC($FeAl_3,\;Fe_3Al,\;Fe_2Al_5$), which initiating and propagating the crack. The reciprocating test for the slide wear was conducted on a multi-pass overlay experiment. Comparing with the multi-pass overlay with no overlap, the overlay with 50% overlap showed better wear resistance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.4
• /
• pp.1911-1930
• /
• 2017

Overlay routing has emerged as a promising approach to improve reliability and efficiency of the Internet. The key to overlay routing is the placement and maintenance of the overlay infrastructure, especially, the selection and placement of key relay nodes. Spurred by the observation that a few relay nodes with high betweenness centrality can provide more optimal routes for a large number of node pairs, we propose a resilient routing overlay network construction method by introducing Super-Relay nodes. In detail, we present the K-Minimum Spanning Tree with Super-Relay nodes algorithm (SR-KMST), in which we focus on the selection and connection of Super-Relay nodes to optimize the routing quality in a resilient and scalable manner. For the simultaneous path failures between the default physical path and the overlay backup path, we also address the selection of recovery path. The objective is to select a proper one-hop recovery path with minimum cost in path probing and measurement. Simulations based on a real ISP network and a synthetic Internet topology show that our approach can provide high-quality overlay routing service, while achieving good robustness.

• The Journal of the Korean dental association
• /
• v.54 no.7
• /
• pp.563-574
• /
• 2016

A clear overlay appliance is a type of a removable appliance made from transparent thermoplastic plastic film that covers the entire dentition to move the teeth. It is one of the most favored orthodontic methods opted for by adult patients; this treatment is esthetic, does not cause discomfort and allows oral hygiene to be easily managed when compared to other conventional fixed treatment methods. However, the use of clear overlay appliances, such as invisalign or clear aligner, is associated with various clinical challenges. In particular, the appliances require longer treatment periods compared to fixed treatment, and due to the structural characteristics of the appliances, it is difficult to make proper posterior occlusion and certain type of tooth movement, including extrusion, rotation and tip. Thus, the clear overlay appliances are regarded as supplementary appliances by most orthodontists and have been used for simple orthodontic treatments, such as partial anterior alignments or orthodontic relapse cases. Owing to the remarkable advancement in the field of 3D digital technology over a period of 15 years, the accuracy and convenience of modern clear overlay appliances have continuously improved. Moreover, orthodontic outcomes have also been greatly improved by the introduction of new materials and successful application of various biomechanical methods from conventional orthodontic treatments in the design of clear overlay appliances. This study investigates the clinical limitations that should be considered during the application of clear overlay appliances and also examines the efforts and methods used to overcome these challenges.

• Journal of Communications and Networks
• /
• v.9 no.4
• /
• pp.428-437
• /
• 2007

Along with the development of network, more and more functions and services are required by users, while traditional network fails to support all of them. Although overlay is a good solution to some demands, using them in an efficient, scalable way is still a problem. This paper puts forward a framework on how to construct an efficient, scalable overlay mesh in real network. Main differences between other overlays and ours are that our overlay mesh processes some nice features including class-of-service(CoS) and traffic engineering(TE). It embeds the end-to-end optimal traffic control law which can distribute traffic in an optimal way. Then, an example is given for better understanding the framework. Particularly, besides good scalability, and failure recovery, it possesses other characteristics such as routing simplicity, self-organization, etc. In such an overlay mesh, an applicable source routing scheme called hierarchical source routing is used to transmit data packet based on UDP protocol. Finally, a guideline derived from a number of simulations is proposed on how to set various parameters in this overlay mesh, which makes the overlay more efficient.

• Journal of Internet Computing and Services
• /
• v.8 no.5
• /
• pp.21-33
• /
• 2007

An overlay network is a virtual network which is constructed on top of a physical computer network. A node in the overlay network is connected through virtual or logical links, where each link corresponds to a path of the links in the underlying physical network. Overlay networks are suitable for sharing heterogeneous resources in distributed environments, However, overlay networks are limited for achieving reliable communication that failure detection in overlay networks is a very important issue. In this paper, we review conditions of conventional failure detection and propose a new approach to failure detection and resilience which can be applied to HRing (Hierarchical Ring) overlay networks. The proposed method consists of the failure detection and the failure resilience phases. Because it utilizes the characteristics of the HRing overlay network for failure detection, it can reduce unnecessary network traffic and provide better scalability and flexibility. We also analyzed and evaluated the performance of the proposed approach through simulations.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.207-221
• /
• 2011

More than sixty percentage of highway in South Korea were constructed by concrete pavements and more than half of the concrete pavements were twenty years or older. The most of highway have difficulty in providing detour due to the traffic and road condition of South Korea. So far, asphalt concrete has been used for the overlay of aged cement concrete pavement. However, the frequent early damage and maintenance of typical asphalt overlay due to repetitive maintenance causes inconvenience of road users and expensive costs. It is necessary to investigate the factors affecting the performance of asphalt concrete overlay to improve the performance of asphalt overlay. However, the performance data of asphalt concrete overlay in South Korea does not exist. In this research, to investigate on the factors affecting the life of asphalt concrete overlay was attempted based on statistical analysis of the performance data of asphalt concrete overlay included in LTPP (Long-Term Pavement Performance) Database of U.S.A.

• Journal of Broadcast Engineering
• /
• v.18 no.4
• /
• pp.559-571
• /
• 2013

This paper has presented a few problems when the 2D video superimposed the overlay text was converted to the 3D stereoscopic video. To resolve the problems, it proposes the scenario which the original video is divided into two parts, one is the video only with overlay text graphic region and the other is the video with holes, and then processed respectively. And this paper focuses on research only to detect and extract the overlay text graphic region, which is a first step among the processes in the proposed scenario. To decide whether the overlay text is included or not within a frame, it is used the corner density map based on the Harris corner detector. Following that, the overlay text region is extracted using the hybrid method of color and motion information of the overlay text region. The experiment shows the results of the overlay text region detection and extraction process in a few genre video sequence.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.33 no.2
• /
• pp.103-114
• /
• 2008

Overlay Multicast is a promising approach to overcome the implementation problem of IP multicast. Real time services like Internet broadcasting are provided by the overlay multicast technology due to the complex nature and high cost of IP multicast. To reduce frequent updates of multicast members and to support real time service without delay, we suggest a reliable overlay multicast tree based on members' sojourn probabilities. Path reliabilities from a source to member nodes are considered to maximize the reliability of an overlay multicast tree. The problem is formulated as a binary integer programming with degree and delay bounds. A tabu search heuristic is developed to solve the NP-complete problem. Outstanding results are obtained which is comparable to the optimal solution and applicable in real time.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.211-216
• /
• 2002

To investigate transition region in welded overlay relating to disbonding crack, the effect of vanadium addition on disbonding of Cr-Mo steels overlay welded with austenitic stainless steel was studied. V modified Cr-Mo steels have a higher resistance to disbonding than V free Cr-Mo steel. One reason is due to the fact that fine vanadium carbide precipated in base metal traps hydrogen and thus decreases the susceptibility to the disbonding. The second is related to the higher stability of the vanadium and stable carbides formed during PWHT, in which the carbon diffusion to the interface is lower than for V free Cr-Mo steel. Decreasing the carbon content at the interface of the weld overlay shows good resistance to the disbonding. Hence, it is important to control the carbon content at the interface of the weld overlay.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.193-194
• /
• 2007

We propose The Fast Join Mechanism for overlay multicast. This mechanism is provided with RP(Rendezvous Point), SM(Session Manager) and overlay multicast nodes. The RP provides data transfer to overlay multicast nodes and the Session Manager controls overlay multicast nodes to maintain the overlay topology.