Browse > Article
http://dx.doi.org/10.5781/KWJS.2007.25.1.030

Effect of Process Parameters on Laser Overlay Behavior of Fe-based Alloy Powder on Aluminum Substrate  

Yoo, Yeon-Gon (Advanced Joining Technology Team, KITECH)
Kang, Nam-Hyun (School of Materials Science and Engineering, Pusan National University)
Kim, Cheol-Hee (Advanced Joining Technology Team, KITECH)
Kim, Jeong-Han (Advanced Joining Technology Team, KITECH)
Kim, Mok-Soon (School of Materials Science and Engineering, Inha University)
Publication Information
Journal of Welding and Joining / v.25, no.1, 2007 , pp. 30-36 More about this Journal
Abstract
A joining of dissimilar metal combination faces significant problems such as poor strength and cracking associated with brittle intermetallic compounds(IMC) formed. An application of laser allows low heat input; leading to less dilution and smaller heat affected zone. The $CO_2$ laser overlay was conducted on an AC2B alloy with feeding Fe-based powders. The overlay area was significantly influenced from the travel velocity rather than the powder feeding rate. The interface between the overlay and substrate consisted of the hard and brittle IMC($FeAl_3,\;Fe_3Al,\;Fe_2Al_5$), which initiating and propagating the crack. The reciprocating test for the slide wear was conducted on a multi-pass overlay experiment. Comparing with the multi-pass overlay with no overlap, the overlay with 50% overlap showed better wear resistance.
Keywords
$CO_2$ laser; Cladding; Fe-based powder; Al substrate; Crack; Overlay; Wear resistance;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Nam-Hyun Kang, Hyun-Byung Chae, Jun-Ki Kim, Jeong-Ha Choi and Jeong-Han Kim, : Abrasion Wear Behavior of Recycled Tungsten Carbide Reinforced Metal Matrix Composite, Korean Journal of Materials Research 13-12 (2003) (in Korean)   DOI
2 The Korean Welding Society, 'welding & Joining Handbook', 736 (in Korean)
3 Kown-yeong Lee, Sung-hoon Lee, Yangdo Kim, Hyun Seon Hong, Young-min Oh and Seon-jin Kim : The effects of additive elements on the sliding wear behavior of Fe-base hardfacing alloy, Wear. 255 (2003), 481-488 (in Korean)   DOI   ScienceOn
4 Jea-Do Kim, Byung-Cheol Jeon, Young-Gon Lee and Dong-Soo Oh, : Characteristics of CO2 Laser Cladding with High Viscosity Mixed Powder, : Journal of KWS, 19-5 (2001) (in Korean)
5 A. Wang, C. Fan, C. Xie, W. Huang, and K. Cui, : Laser Cladding of Iron-Base Alloy on Al-Si Alloy and Its Relation to Cracking at the Interface, JMEPEG (1996) vol.5, 775-783   DOI   ScienceOn
6 W.S. Miller, L. Zhuang, J. Bottema, A.J. Wittebrood, P. De Smet, A. Haszler, A. Vieregge. : Recent develpment in aluminium alloys for the automotive industry, Materials Science and Engineering A280 (2000) 37-49
7 Kawasaki, M. ; Takase, K. ; Kato, S. ; Nakagawa, M. : Development of Engine Valve Seats Directly Deposited Onto Aluminum Cylinder Head by Laser Cladding Process, SAE transactions, 101-3 (in Japanese)
8 J. Arnold and R. Volz, : Laser Powder Technology for Cladding and Welding, Journal of Thermal Spray Technology Vol. 8(2) June 1999 243-248   DOI