• Spatial Information Research
• /
• v.17 no.2
• /
• pp.201-212
• /
• 2009

As GIS analysis method began to be introduced in late 1980's, studies of land development applying the GIS also started to be proceeded in various fields. Since 2003, Land Suitability Assesment has been adopted in order to prevent national land from development thoughtless for the environment and to plan appropriate national land management in terms of green development. Land Suitability Assessment System II based on diverse GIS analysis method such as Contour Analysis, Overlay Analysis, Network Analysis was particularly adopted to draft plans of specifying and altering of exclusionary zoning as well as installing and maintaining of urban planning facilities. But there has been a lot of problem, like an inaccurate basic data and assessment indicators, unmatched threshold, and contradicted evaluation result between each evaluating systems. Even though it is suited to an evaluation criteria, grade distribution is applied to start at 20, and development-centered evaluation result is offered. Now, we observed how suitability values and grading were changed, ordering to change grade distribution system from $20{\sim}100$ to $0{\sim}100$. In result, it showed changes of grades in some parcels. And in case of suitability values, 87% of parcels decreased to minimum 1 point, maximum 70 points. It means that changing grade distribution system of assessment system II doesn't have only influence on suitability values and grading but it is also an empirical analysis because of considering both development and maintenance.

• Korean journal of applied entomology
• /
• v.32 no.3
• /
• pp.307-316
• /
• 1993

The potential of using GIS in analyzing pest surveillance data was explored. The Spatial Analysis System (SPANS) was used to construct a spatial data base to study pest distributions using pest surveillance data collected from 152 stations in South Korea. The annual spatIal distributions of the striped rice borer(SRB), Chdo suppressalis, showed that high densities started to expand in the early 1980s, reaching a peak in 1988. The pattern change appears to be related to cultivation of japonica and indica-japonica hybrid varieties in South Korea. Japo7l!ca varieties have longer duration resulting in the SRB haVlng more time to mature and hibernate in wmter. The locus of SRB spread appears to be located in the mid-west region near lri, Chun~ Buk Province. High brown planthopper (BPH) populations in South Korea are often related to the early immigration and temperature. The simulated distribution of PPH densities in September using these two factors was compared with the actual distribution obtained using 1990 data. The two density maps corresponded closely excepL for differences in the south eastern valley. By overlaying the simulated map layer with the elevation and rice area maps, more specific BPH risk zones could be identified.

• International Journal of Highway Engineering
• /
• v.3 no.4 s.10
• /
• pp.117-126
• /
• 2001

In this research, evaluation of adhesion in tension property of SBR-modified concrete to ordinary portland cement concrete was conducted with uniaxial direct tensile bond test which was proposed by Kuhlmann. A test set-up was fabricated in order to minimize the eccentric force by introducing a joint which might fully rotate. The main experimental variables were cement-latex ratios, surface preparations and moisture levels. The results obtained were as follows: The LMC specimen at 15% latex-cement ratio increased the adhesion in tension by range of 37% compared to that of conventional cement concrete. This might be due to latex film formed between cement paste and aggregate. The effects of surface preparation on bond of latex modified concrete to conventional concrete were significant at the conditions by sand paper and wire brush. A better bond could be achieved by rough surface rather than smooth. The saturated and surface dry (SSD) condition were considered to be the most appropriate moisture level followed by wet, finally by dry. Thus, a proper surface preparation and moisture level are quite necessity in order to obtain better bonding at LMC overlay.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.5
• /
• pp.71-86
• /
• 2017

This work explores the historical transformation of manual landscape architectural drawings in terms of hybridization to uncover their inherent creative aspect. Landscape architectural drawing has duel functions; namely, scientific instrumentality and artistic imagination, which are relative, interchangeable, and transformable. These characteristics have been embodied in the forms of particular types of drawing, projections, perspective views, and diagrams, which are not so much clearly distinguishable as rather mutually complementary and hybridized. In particular, the pictorial views of plants in the forms of a perspective view or elevation were frequently hybridized to projection drawings of grounds and architectural structures, which is called planometrics. Particular drawing types have often emerged as suitable and thereby dominant forms, depending on the particular historical styles of landscape design. Sixteenth-century Italian Renaissance gardens and seventeenth-century French formal gardens were generally visualized in the form of projections. Eighteenth-century and early nineteenth-century English landscape gardens were frequently represented in a pictorial perspective view. In nineteenth-century America, different drawing techniques such as competition drawing, photography, and map overlay were specialized depending on their respective functions. Twentieth-century American modernists began to explore the diagram to deploy design strategies. In such transformation, however, the planometric, which considers both the ground plane and plant's frontal identities simultaneously and thereby is suitable to landscape design, was frequently used as a hybridization technique. In the mid-nineteenth century, a top view of plants replaced the planometric, and then, in the twentieth century, plants were no longer represented artistically, instead reduced to the forms of standardized flat symbols. The use of instrumental visualizations thereby gradually increased rather than the use of an imaginative representation for landscape architectural drawings.

• Journal of Wetlands Research
• /
• v.13 no.1
• /
• pp.95-104
• /
• 2011

This study was implemented to select the suitable site for Palustrine Wetland at habitat restoration for Oriental stork, red species and top-level predator in ecosystem. The evaluation items was fitted by review the antecedent studies on the suitable site selection model and evaluation items of wetland. The study sites were setted in $5,884,800m^2$ area including Yesan-gun Dae-ree, in which Oriental stork' park will be located, through DEM(Digital Elevation Model) watershed analysis. The thematic map by valuation items with secure of water resource, soil, topography, distance between roads, houses, etc., land using, wildlife corridor, and type of water resource was prepared using GIS program. The sites with high evaluation score were selected as suitable creation sites for wetland through overlapping those maps. Total 8 sites with over 18 point were selected. The characteristics of selected sites show that the soil are consisted of clay, the connectivity is valued high with surface water, the slope are gentle, and the connectivity is good with surroundings ecosystem. The result of water quality analysis, which was implement to survey available water resources and develop the solution of problem of water environment, showed that water quality at Salmok reservoir and Bogang reservoir is generally good, but the water quality at stagnant water body rising out from groundwater is not good. This study has limit to select the suitable sites of wetland only by analyzing physiotherapy environment in study area. Hereafter, the study is need to examine closely enhancement effects of biological diversity through investigation of biotic environment.

• International Journal of Highway Engineering
• /
• v.8 no.3 s.29
• /
• pp.77-88
• /
• 2006

The maintenance / repair of concrete pavements has become an issue as a result of increasing of concrete pavements' service year. Asphalt overlay is applied to the concrete pavements after partial repairs on all occasions. This thesis discusses the application standard, evenness, skid resistance, noise, economical efficiency, extension of life span, etc. of diamond grinding, a method of maintenance about concrete pavements. Based on this, it was applied to the field and measured the performance. It was measured the longitudinal evenness of before and after the construction through measurement equipment. and surveyed the skid resistance the each lane classified using the SN standard value. In case of noise, it is selected the kind of vehicle, velocity, then measured the noise between control and constructed site. In addition, it is evaluated the average texture depth. As a result of the analysis, longitudinal evenness is improved about $6{\sim}40%$, skid resistance is improved 66% at first section,37% at second section. Noise is reduced 3.4dB average, and average texture depth is 79% deeper than control section. Therefore, it can be concluded that diamond grinding is suitable as maintenance / repair method of concrete pavements.

• International Journal of Highway Engineering
• /
• v.6 no.1 s.19
• /
• pp.47-56
• /
• 2004

To determine the pure bond strength between substrate and its overlayed concrete material, a direct pull-off test method was introduced by using a bi-material cylinder with which a penny-shaped crack was mountained at its interface. First, to evaluate the stress magnification or concentration at the interface, the energy release rates of a penny-shaped interface crack in remote tension loading on a bi-material cylinder were determined in terms of different modulus ratios and undonded area ratios(crack ratios) using a commercial finite element program. Then the energy release rates were calibrated as non-dimensional values in consideration of structural dimensions and applied forces. And to evaluate whether this new pull-off test method gives sound test results, three different sizes of unbended area ratios were incorporated along their interface in bi-material cylinders(sulphur polymer concrete + old concrete). Test results showed that all specimens were broken off at their interfaces as intended. Also the FEM analyses and test results indicated that a bi-material specimen with unbended area ratio of 0.4$\sim$0.6 is suitable for best accurate testing.

• Journal of KIISE:Software and Applications
• /
• v.34 no.1
• /
• pp.79-94
• /
• 2007

In the ubiquitous computing age which uses a high quantity network, mobile devices such as wearable and hand-held ones with a small tamers and a wireless communication module will be widely used in near future. Thus, a lot of researches about an augmented game on mobile devices have been attempted recently. The existing augmented games used a traditional 'backpack' system and a pattern marker. The 'backpack' system is expensive, cumbersome and inconvenient to use, and because of the pattern marker, it is only possible to play the game in the previously installed palace. In this paper, we propose an augmented game called Flying Cake using a face region to create the virtual object(character) without the pattern marker, which manually indicates an overlapped location of the virtual object in the real world, on a small and mobile PDA instead of the cumbersome hardware. Flying Cake is an augmented shooting game. This game supplies us with two types: 1) a single player which attacks a virtual character on images captured by a camera in an outdoor physical area, 2) dual players which attack the virtual character on images which we received through a wireless LAN. We overlap the virtual character on the face region using a face detection technique, and users play Flying Cake though attacking the virtual character. Flying Cake supplies new pleasure to flayers with a new game paradigm through an interaction between the user in the physical world captured by the PDA camera and the virtual character in a virtual world using the face detection.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.1
• /
• pp.1-22
• /
• 1999

In order to investigate various physical and biological properties of dental magnetic attachments studies on retentive characteristics, corrosion properties, cytotoxicity of different magnetic systems for dental applications were done. For the study of retentive characteristics changes of retentive force by increasing air gap, wear properties of various attachment systems and loss of magnetic force by heat treatment were measured. Forte study of corrosion property of magnet covering metal electrochemical corrosion was done in artificial saliva and 0.9% NaCl solution between $-1,000mV_{SCE}\;and\;+1,000mV_{SCE}$. Anodic polarization curves are obtained about 6 types of samples and 2 types of solution. Corroded surfaces were examined with metallurgical microscope, scanning electron microscope and surface profilometer. For the study of cytotoxicity of magnetic attachment and its field cell growth and agar overlay test were done. The results of this study were as follows. 1. In Magnetic attachments using closed circuit retentive force at zero air gap was greater than magnets using open circuit, but decrease of retentive force by increasing air gap was also greater than open systems. 2. After 40,000 cycles of wear test all mechanical attachment resulted in varing degree of retention loss but in magnetic attachments no loss of retentive force was observed. 3. The magnetic attachment using Neodymium magnet showed early loss of retentive force about $200^{\circ}C$ but attachment using Samarium magnet showed some resistance to heat treatment and complete retention loss was observed about $500^{\circ}C$. The keeper was not influenced by heat treatment in retention. 4. In electrochemical corrosion test Dyna magnetic attachment covering metal showed the highiest corrosion resistance and Shiner magnet covering metal showed the least corrosion resistance and examination of corroded surface with metallurgical microscope, scanning electron micro-scope and surface profilometer also showed same results with anodic polarization corves. 5. The result of cell culture tests on the magnet covered with metal showed least recognizable cytotoxicity.

• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.705-710
• /
• 2015

The fabrication process of thin boron-doped nanocrystalline diamond (B-NCD) microelectrodes on fused silica single mode optical fiber cladding has been investigated. The B-NCD films were deposited on the fibers using Microwave Plasma Assisted Chemical Vapor Deposition (MW PA CVD) at glass substrate temperature of 475 ℃. We have obtained homogenous, continuous and polycrystalline surface morphology with high sp³ content in B-NCD films and mean grain size in the range of 100-250 nm. The films deposited on the glass reference samples exhibit high refractive index (n=2.05 at λ=550 nm) and low extinction coefficient. Furthermore, cyclic voltammograms (CV) were recorded to determine the electrochemical window and reaction reversibility at the B-NCD fiber-based electrode. CV measurements in aqueous media consisting of 5 mM K₃[Fe(CN)₆] in 0.5 M Na₂SO₄ demonstrated a width of the electrochemical window up to 1.03 V and relatively fast kinetics expressed by a redox peak splitting below 500 mV. Moreover, thanks to high-n B-NCD overlay, the coated fibers can be also used for enhancing the sensitivity of long-period gratings (LPGs) induced in the fiber. The LPG is capable of measuring variations in refractive index of the surrounding liquid by tracing the shift in resonance appearing in the transmitted spectrum. Possible combined CV and LPG-based measurements are discussed in this work.