• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.376-385
• /
• 1991

For manufacturing trimming-free plates which have rectangular shaped edges and straight edges in as-rolled state, it is necessary to investigate rolling characteristics of overlap, bulge and width deviation etc. in a standardized plate rolling process. The present wok is for preventing edge overlap as the first approach to develop trimming-free plate rolling technique. An experimental study on overlap control was done with plasticine material in order to examine influence factors and find a control method by use of a laboratory mill scaled down to one tenth of actual production mill. It was found that edge overlapping was increased with the increase of slab thickness and of broadside rolling ratio, but decreased with the increase of chamfered amount on slab edges. In the simulated rolling experiment with edge chamfered slabs of various chamfered angles, the chamfered angle of 60.deg. was the most effective one for reducing overlapping irrespective of slab thickness and of broadside rolling ratio.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.2
• /
• pp.227-235
• /
• 2003

The WSGG-based narrow band model was employed to solve the radiative transfer equations along isothermal and non-isothermal paths through $CO_2-H_2O-N_2$ gas mixtures at 1 atm. When the WSGGM is applied for arbitrary gas mixtures by considering the multiplication property of transmissivity in overlapping bands, the number of gray gases is significantly increased. To reduce the computation time, three different regrouping methods for the gray gases are tested in obtaining the mean absorption coefficient for each gray gas group. Among them, the regrouping method by minimizing the regrouping error shows the best results. For the isothermal media, 10 gray gases show fairly good agreement with the results by statistical narrow band(SNB) model which are regarded as reference solutions. For non-isothermal media, 20 gray gases show good agreement with reference solutions.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.6 no.2
• /
• pp.15-20
• /
• 2004

These days are referred to as 'the times of textile fashion,' owing to the emphasis on textile design in the fashion industry. Accordingly, apparel companies have increased their interests in developing new types of textiles to overcome the limits of style and silhouette. Now the ultra-fashion of textile, a new way of process and design development, is given much more attention. A Moire interference pattern has a longer wavy circle of interference, an effect of intensity interference, than one made by piling more than one reflecting plate or transmitting plate. Till now, Moire interference patterns have been used to confirm scientific theory and to measure the structure of a body or a subject in areas such as physics and medical science. Work has also been done on the Moire interference effects on TV screens said to cause dizziness and eye strain. This study focuses on the new types of textiles by creating the appearance of the Moire phenomena. Contrary to the present usual stationary patterns of textiles, it is a varying pattern according to the different gratings, different angles, piling gratings, and the movements of the human bodies. In the preceding study, we observed Moire fringes formed by overlapping two different or same kinds of gratings such as parallel line gratings, square gratings, conic gratings and semicircular gratings and tried to find a promising possibility of new textiles through the method of clothes design simulation.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.12
• /
• pp.943-952
• /
• 2003

GDS(Grating automatic Drawing System), which is an automatic design system of metal products called grating, is a system that produces various detailed drawings on the basis of information within a Plan Drawing that represents layout of the gratings such as locations, shapes, directions, etc. However, automatically produced drawings by GDS do not fully satisfy the standard of the general dimension marking method used among the layout designers. The lack of this standard quality mainly results from the fact that overlapping among dimension markings appears frequently. To solve the overlapping problem we applied the rule-based expert system which uses the expert's knowledges and facts to solve the problems. The rules for the expert system are designed based on the expertise of skilled layout designers within the grating production lines.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.11
• /
• pp.1028-1036
• /
• 2004

Ultrasonic sensors are widely used in mobile robot applications to recognize external environments by virtue that they are cheap, easy to use, and robust under varying lighting conditions. In most cases, a single ultrasonic sensor is used to measure the distance to an object based on time-of-flight (TOF) information, whereas multiple sensors are used to recognize the shape of an object, such as a comer, plane, or edge. However, the conventional sequential driving technique involves a long measurement time. This problem can be resolved by pulse coding of ultrasonic signals, which allows multi-sensors to be emitted simultaneously and adjacent objects to be distinguished. Accordingly, this paper presents a new simultaneous coded driving system for an ultrasonic sensor array for object recognition in autonomous mobile robots. The proposed system is designed and implemented. A micro-controller unit is implemented using a DSP, Polaroid 6500 ranging modules are modified for firing the coded signals, and a 5-channel coded signal generating board is made using a FPGA. To verify the proposed method, experiments were conducted in an environment with overlapping signals, and the flight distances fur each sensor were obtained from the received overlapping signals using correlations and conversion to a bipolar PCM-NRZ signal.

• Wind and Structures
• /
• v.20 no.6
• /
• pp.751-761
• /
• 2015

A multi-platform offshore wind farm is receiving the worldwide attention for the sake of maximizing the wind power capacity and the dynamic stability at sea. But, its wind power efficiency is inherently affected by the interference of wake disturbed by the rotating blades, so its layout should be appropriately designed to minimize such wake interference. In this context, the purpose of this paper is to introduce a layout optimization for multi-platform offshore wind farm consisted of 2.5MW spar-type floating wind turbines. The layout is characterized by the arrangement type of wind turbines, the spacing between wind turbines and the orientation of wind farm to the wind direction, but the current study is concerned with the spacing for a square-type wind farm oriented with the specific angle. The design variable and the objective function are defined by the platform length and the total material volume of the wind farm. The maximum torque loss and overlapping section area are taken as the constraints, and their meta-models expressed in terms of the design variable are approximated using the existing experimental data and the geometry interpretation of wake flow.

• Journal of Communications and Networks
• /
• v.15 no.5
• /
• pp.527-537
• /
• 2013

Improving resource utilization has been a hot issue in heterogeneous wireless networks (HWNs). This paper proposes a radio resource management (RRM) method based on access proportion optimization. By considering two or more wireless networks in overlapping regions, users in these regions must select one of the networks to access when they engage in calls. Hence, the proportion of service arrival rate that accesses each network in the overlapping region can be treated as an optimized factor for the performance analysis of HWNs. Moreover, this study considers user mobility as an important factor that affects the performance of HWNs, and it is reflected by the handoff rate. The objective of this study is to maximize the total throughput of HWNs by choosing the most appropriate factors. The total throughput of HWNs can be derived on the basis of a Markov model, which is determined by the handoff rate analysis and distribution of service arrival rate in each network. The objective problem can actually be expressed as an optimization problem. Considering the convexity of the objective function, the optimization problem can be solved using the subgradient approach. Finally, an RRM optimization scheme for HWNs is proposed. The simulation results show that the proposed scheme can effectively enhance the throughput of HWNs, i.e., improve the radio resource utilization.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.540-545
• /
• 2013

The Fractional Fourier transform, as a generalization of the classical Fourier Transform, was first introduced in quantum mechanics. Because of its simple and useful properties of Fractional Fourier transform in time-frequency plane, various research results in sonar and radar signal processing have been introduced and shown superior results to conventional method utilizing Fourier transform until now. In this paper, we applied Fractional Fourier transform to sonar signal processing to detect and separate the overlapping linear frequency modulated signals. Experimental results show that received overlapping LFM(Linear Frequency Modulation) signals can be detected and separated effectively in Fractional Fourier transform domain.

• Polymer(Korea)
• /
• v.30 no.5
• /
• pp.367-372
• /
• 2006

Electrochromic materials based on conducting polymers with pendant chromophores as well as their electrochromic properties are described. The conducting polymers described aye polypyrrole, polythiophene, poly(3,4-ethylenedioxythiophene), poly (cyclopentadithiophene), and poly (1,4-bis [2- (3,4-ethylenedioxy) thienyl] benzene). The chromophores described are viologen and perylenetetra-carboxylic diimide. When the wavelength ranges of absorption of the conducting polymer and the chromophore aye not overlapping, multiple electrochromism was achieved. When the wavelength ranges are largely overlapping, higher contrast was achieved. An easy method for prediction of the film thickness for maximum contrast of a given electrochromic material is also described.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.10
• /
• pp.1036-1043
• /
• 2014

In this paper, a new haptic device is proposed for the teleoperation, which can recognize the invisible environment of a mobile robot. With this new device, it is possible for the user to identify the location of an obstacle and to avoid it. The haptic device has been attached on the top of a joystick so that the user can remotely control the mobile robot to avoid the obstacles which are recognized by the ultrasonic sensors. Also, the invisible environment is recognized more accurately overlapping the data from the ultrasonic sensors. There are five vibration motors in the haptic device to indicate the direction of the obstacle. So the direction of the obstacle can be recognized by the vibration at the finger on each vibration motor. For various situations and surrounding environments, experiments are performed using fuzzy controller and overlapping ultrasonic sensors. The results demonstrate the effectiveness of the proposed haptic joystick.