• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.10
• /
• pp.3538-3556
• /
• 2014

This paper proposes a novel video stitching method that improves real-time performance and visual quality of a multi-camera video surveillance system. A two-stage seam searching algorithm based on enhanced dynamic programming is proposed. It can obtain satisfactory result and achieve better real-time performance than traditional seam-searching methods. The experiments show that the computing time is reduced by 66.4% using the proposed algorithm compared with enhanced dynamic programming, while the seam-searching accuracy is maintained. A real-time local update scheme reduces the deformation effect caused by moving objects passing through the seam, and a seam-based local color transfer model is constructed and applied to achieve smooth transition in the overlapped area, and overcome the traditional pixel blending methods. The effectiveness of the proposed method is proved in the experiements.

• Journal of the Korean Society for Railway
• /
• v.9 no.4 s.35
• /
• pp.432-440
• /
• 2006

Prior to the service evaluation, many kinds of its attributes must be identified on the basis of rational decision owing to complexity and ambiguity inherent in logistics service. there are so many evaluation methods but they are not applicable to logistics service the have property of non-additivity and overlapped attributes. Therefore, probability measure can not used to evaluate logistics service but Fuzzy Measure is required. And the method should be easy to calculate it Recently Fuzzy theory has been applied in Various evaluation problem. Fuzzy evaluation based on Fuzzy theory can accommodate fuzziness in judgement with people through introducing Fuzzy Measure. In this paper, Hierarchical Fuzzy Process is applied to evaluate level of logistics service in Korail and the biggest six logistics companies in the korea which is called 3PL Company. Also Fuzzy Relation Equation which is problem identifying evaluation value at these fuzzy evaluation is applied to verify relation between Input and Output data through @-operation. Therefore, we apply this Fuzzy Relation Equation to Hierarchical Fuzzy Process and verify evaluation value which objects of evaluation are able to possess.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.70.1-70.1
• /
• 2018

The DEEP-South photometric census of small Solar System bodies is producing massive time-series data of variable, transient or moving objects as a by-product. To fully investigate unexplored variable phenomena, we present an application of multi-aperture photometry and FastBit indexing techniques to a portion of the DEEP-South year-one data. Our new pipeline is designed to do automated point source detection, robust high-precision photometry and calibration of non-crowded fields overlapped with area previously surveyed. We also adopt an efficient data indexing algorithm for faster access to the DEEP-South database. In this paper, we show some application examples of catalog-based variability searches to find new variable stars and to recover targeted asteroids. We discovered 21 new periodic variables including two eclipsing binary systems and one white dwarf/M dwarf pair candidate. We also successfully recovered astrometry and photometry of two near-earth asteroids, 2006 DZ169 and 1996 SK, along with the updated properties of their rotational signals (e.g., period and amplitude).

• Convergence Security Journal
• /
• v.6 no.2
• /
• pp.53-60
• /
• 2006

In the applications such as CAD or image processing, a variety of geometric objects are manipulated. A polygon in which all the edges are parallel to x- or y-axis is decomposed into simple rectangles for efficient handling. But, depending on the partitioning algorithms, the same region can be decomposed into a completely different set of rectangles in the number, size and shape of rectangles. So, it is necessary an algorithm that compares two sets of rectangles extracted from two scenes such as CAD or image to see if they represent the same region. This paper proposes an efficient algorithm that compares two sets of rectangles. The proposed algorithm is not only simpler than the algorithm based on sweeping method, but also reduces the number $O(n^2)$ of overlapped rectangles from the algorithm based on a balanced binary tree to O(nlogn).

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.7
• /
• pp.103-110
• /
• 2008

This paper presents a new approach of recognizing a 3D object using a single camera, based on the extended convex hull of its silhouette. It aims at minimizing the DB size and simplifying the processes for matching and feature extraction. For this purpose, two concepts are introduced: extended convex hull and measurable region. Extended convex hull consists of convex curved edges as well as convex polygons. Measurable region is the cluster of the viewing vectors of a camera represented as the points on the orientation sphere from which a specific set of surfaces can be measured. A measurable region is represented by the extended convex hull of the silhouette which can be obtained by viewing the object from the center of the measurable region. Each silhouette is represented by a relation graph where a node describes an edge using its type, length, reality, and components. Experimental results are included to show that the proposed algorithm works efficiently even when the objects are overlapped and partially occluded. The time complexity for searching the object model in the database is O(N) where N is the number of silhouette models.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.2
• /
• pp.109-121
• /
• 2020

Depth calculation of objects in a scene from images is one of the most studied processes in the fields of image processing, computer vision, and photogrammetry. Conventionally, depth is calculated using a pair of overlapped images captured at different view points. However, there have been studies to calculate depths from a single image. Theoretically, it is known to be possible to calculate depth using the diameter of CoC (Circle of Confusion) caused by defocus under the assumption of a thin lens model. Thus, this study aims to verify the validity of the thin lens model to calculate depth from edge blur amount which corresponds to the radius of CoC. For this study, a commercially available DSLR (Digital Single Lens Reflex) camera was used to capture a set of target sheets which had different edge contrasts. In order to find out the pattern of the variations of edge blur against varying combination of FD (Focusing Distance) and OD (Object Distance), the camera was set to varying FD and target sheet images were captured at varying OD under each FD. Then, the edge blur and edge displacement were estimated from edge slope profiles using a brute-force method. The experimental results show that the pattern of the variations of edge blur observed in the target images was apart from their corresponding theoretical amounts derived under the thin lens assumption but can still be utilized to calculate depth from a single image for the cases similar to the limited conditions experimented under which the tendency between FD and OD is manifest.

• 한국문화재보존과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.137-153
• /
• 2004

We have analyzed the ingredients of 17 pieces of Bronze Age bronze ware, and an additional 22 pieces of Koryo and Chosun dynasty bronze ware. We have also conducted analysis of the extraction sites where these bronze ware items were found. For analyzing the main ingredient the bronze ware items have been divided into 3 groups - Cu-Sn(70?75:20), Cu-Pb-Sn(70:10:10), Cu-Pb-Sn(60:10:20) type respectively. In tile cases of the Cu-Pb-Sn groups the division comes down to differences in the Cu content as the main component, and elements such as Ni, Fe, Co contribute as a micro ingredient. The geographical and periodic characteristics of ancient bronze ware items show that theircompositional element changes from Cu:Sn to Cu:Pb:Sn and the Cu content decreases with the period,while the Pb content increases with the period. Bronze ware items from Suchon Ri, Gongju (that were used in 3 B.C.) form very different categories from 3rd ${\~}$ 2nd B.C.. They additionally formed very different categories from those bronze ware items analyzed in this research. These bronze ware itemsare shown to be geographically close and periodically overlapped, but made of a new elemental composition. This shows an inflow of a production technical culture present in the new bronze wares. The main component content of Cu is lower, and the Co and Fe contents (as microelements) are much higher than that of other bronze ware items. Such facts showthat those bronze ware items used completely different materials from bronze ware items in other cultural areas, or that there were differences in smelting techniques In the places where ancient bronze ware items have been extracted, it is presumed that the materials originated from the southern parts of Korea andnorthern parts and southern parts of China. .As more bronze ware scientific research is compiled one can conclude that that there will be enough scientific evidence to study the Bronze Age culture of Koreasystematically.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.3 s.21
• /
• pp.41-51
• /
• 2002

Recently, many studies extracting the geography information using digital aerial image have been implemented. But it is very difficult that automatically recognizing objects using edge detection method on the aerial image, and so that work have practiced manually or semi-automatically. Therefore, in this study, we have removed impedimental elements for recognition using the image which overlapped the significant information bands of brightness-sliced aerial images, then have developed the algorithm which can automatically recognize and extract road information and we will try to apply that method when we develope a system. For this, first of all, we have developed the 'template conformal-transformation moving operator' for automatically recognizing crosswalk area from crosswalk band image and the 'window normal search algorithm' which is able to track road area based on long-side length of crosswalk, so that we have proposed the method that can extract directly the road information from the aerial image.

• Spatial Information Research
• /
• v.19 no.2
• /
• pp.37-46
• /
• 2011

Recently in the field of GIS(Geographic Information System), data integration from various sources has become an important topic in order to use spatial data effectively. In general, the integration of spatial data is accomplished by navigating corresponding space object and combining the information interacting with each object. But it is very difficult to navigate an object which has correspondence with one in another dataset. Many matching methods have been studied for navigating spatial object. The purpose of this paper is development of method for searching correspondent spatial object considering local position error which is remained even after coordinate transform ation when two different building data sets integrated. To achieve this goal, we performed coordinate transformation and overlapped two data sets and generated blocks which have similar position error. We matched building objects within each block using similarity and ICP algorithm. Finally, we tested this method in the aspect of applicability.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.4
• /
• pp.15-25
• /
• 2014

The purpose of this study is to promote the artistic value and formative aesthetic of clothes in daily life through a proposal of inventive fashion design by utilizing Depaysement of Surrealism, which visualizes a more realistically and more specifically than fact in illogical and unfamiliar situation, Focused on details of Korean traditional costume silhouette. The method of this study, the literature and existing researches related to Depaysement were analyzed through theoretical review for establish the expressive techniques of Depaysement expressed in contemporary fashion. Conclusions from this study are as follows: first, the expressive techniques of Depaysement are derived that are 'change of scale', 'change of materials', 'combination of heterogeneous objects', 'arrangement of object in a strange space', 'overlapped object', 'paradoxical image', 'variable awareness of boundary.' Second, expressive techniques of Depaysement present a new methodology which can express an irrational thinking, which is not controled by reason such as unconsciousness, dream, and fantasy etc, in a way that is easier and more realistic rather than thinking centered on an art which is ruled by consciousness. Third, unique and free-form fashion design, which destroys a general idea, was could develop by using abundant materials and composing items borrowed various silhouette for expressive the techniques of Depaysement. Forth, Through this study, the concept of Korean fashion design, that was limited by the standard form when we approach Korean fashion design as identity of social culture, ideology of reflection and expression, object of commercial expression, was could think outside of the box.