• Korean Journal of Materials Research
• /
• v.11 no.11
• /
• pp.929-935
• /
• 2001

Two-dimensional computer simulations were conducted on percolation structure in which second phases of various aspect ratios were arranged in a lattice (matrix). The second phases were randomly arranged in an array with two different computational programs; one prohibiting an overlap among second phases and the other allowing the overlap. From the simulation prohibiting the overlap, it was predicted that a complete path was formed at less amounts of the second phase with higher aspect ratios. In the simulation allowing the overlap, a complete path throughout the array was formed by arranging the second phase of an aspect ratio of 1. 5, 20, 100 with less than 59%, 43%, 19%, 4% in the array, respectively.

• Korean Journal of Materials Research
• /
• v.13 no.11
• /
• pp.756-760
• /
• 2003

Two dimensional computer simulations were conducted on percolative structure in which second phases with various short diameter were arranged in matrix phase. In case of prohibiting the overlap among the second phases, the maximum area fraction of second phase arranged in matrix was increased with higher short diameter. In case of allowing the overlap among the second phases, the critical area fraction was increased with higher short diameter and the total number of distributed second phase was decreased. This results represented that thickness variation of short diameter by grain growth on the production processes affect significantly forming the completion path.

• Journal of the Korean Society for Railway
• /
• v.18 no.1
• /
• pp.25-32
• /
• 2015

It has been subject to question whether a conventional traffic signal controller can support efficient operation at grade intersections in which vehicles and tram lines cross concurrently. This study proposes a list of functional requirements for a traffic signal controller to support effective operation of trams at such an intersection. The considered details includes the combinations of geometric conditions at which vehicle, bus, and tram lines are aligned, the types of exclusive tram signals, and the combinations of various signal phases, including exclusive tram phases, which are currently undefined in the nation. The results suggest that the controller should be capable of dealing with the NEMA standard overlap relays and a quadruple-ring phase representation scheme.

• Microbiology and Biotechnology Letters
• /
• v.25 no.6
• /
• pp.560-565
• /
• 1997

DNA fragment assembly is a major concem in shot-gun DNA sequencing project. It is to reconstruct a consensus DNA sequence from a collection of random oritented fragments. We developed a computer program that is useful for DNA fragment assembly. Inputs to the program are DNA fragment sequences including IUB-IUPAC bases. The program produces the most probable reconstruction ot the original DNA sequence as a text format or a PostScript format. The program consists of four phases: the first phase quickly eliminates fragment pairs that can not possibly overlap. In the second phase, the quality of overlap between each pair is calculated to a score. In the third phase, overlap pairs are sorted by their scores and consistency of the overlaps is checked. The last phase determines consensus sequences and displays them. The performance of fragment assembly program was tested on a set of DNA fragment sequences which were generated from long DNA sequences of GenBank by a fragmentation program.

• International Journal of Quality Innovation
• /
• v.8 no.2
• /
• pp.115-131
• /
• 2007

The vehicle development process (VDP) is iterative in nature with numerous interactions and information flows between design groups and between development phases. The VDP has been changed from a sequential-functional development to a concurrent-team based approach. Concurrent execution of design activities may reduce the development lead-time, but it increases the managerial complexity in the VDP. A system dynamics model was developed to understand the transient behavior of parallel, overlap, and sequential processes in the VDP and to determine the optimal level of overlapping considering the development lead-time and total number of reworks. The simulation results showed that different execution processes should be used, depending upon the intensity of reworks.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.609-614
• /
• 2013

Extended H$\ddot{u}$ckel tight-binding band structure calculations are used to address the chemical bonding and elastic properties of $Zr_2AC$ (A=Al, Si, P, and S). Elastic properties are interpreted by analyzing the density of states and the crystal orbital overlap population for the respective phases. Our results show that the bulk modulus of these ternary compounds is determined by the strength of Zr-A bonds.

• Journal of the Optical Society of Korea
• /
• v.14 no.3
• /
• pp.209-214
• /
• 2010

The Raman shift of water vapor is 3657 $cm^{-1}$, and this Raman signal can be easily separated from other Raman signals or elastic signals. However, it is difficult to make simultaneous Raman measurements on the three phases of water, namely, ice water, liquid water, and water vapor. This is because we must consider the overlap between their Raman spectra. Therefore, very few groups have attempted to make Raman simultaneous measurements even on two elements (water vapor and liquid water, or water vapor and ice water). We have made an effort to find three characteristic Raman wavelengths that correspond to the three phases of water after measuring full Raman spectra of water on particular days that are rainy, snowy or clear. Finally, we have found that the 401-nm, 404-nm, and 408-nm wavelengths are the most characteristic Raman wavelengths that are representative of the water phases when we are using the 355-nm laser wavelength for making measurements.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.6
• /
• pp.569-577
• /
• 2010

A multiscale particle simulation technique that can be applied to a multiphase fluid system has been developed. In the boundary region where the macroscopic- and microscopic-scale models overlap each other, three distinctive features are introduced in the simulation. First, a wall is set up between the gas and liquid phases to separate them and match the phases respectively to the macroscopic conditions stably. Secondly, the interfacial profile is obtained near the matching region and the wall translates and rotates to accommodate the change in the liquid-vapor interfacial position in the molecular model. The contact angle thus obtained can be sent to the macroscopic model. Finally, a state of mass and temperature in the region is maintained by inserting and deleting the particles. Good matching results are observed in the cases of the complete and partial wetting fluid systems.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.43 no.6
• /
• pp.363-367
• /
• 2017

Headaches are one of the most common conditions associated with temporomandibular disorder (TMD). In the present paper, we evaluated the relationship between headache and TMD, determined whether headache influences the symptoms of TMD, and reported two cases of TMD accompanied by headache. Our practical experience and a review of the literature suggested that headache increases the frequency and intensity of pain parameters, thus complicating dysfunctional diseases in both diagnostic and treatment phases. Therefore, early and multidisciplinary treatment of TMD is necessary to avoid the overlap of painful events that could result in pain chronicity.

• Journal of the Korean Chemical Society
• /
• v.57 no.1
• /
• pp.35-39
• /
• 2013

The chemical bonding and elastic properties of $Ti_2AC$ (A = Ga, Tl) have been investigated by means of extended H$\ddot{u}$ckel tight-binding band structure calculations. The bulk modulus of $Ti_2AC$ decreases as Ga is replaced with Tl at the A sites. This can be understood by considering the relative strength of Ti-A bonds resulting from the different atomic size of 3A-group elements. The analysis of the projected density of states (PDOS) and the crystal orbital overlap population (COOP) for the respective phases shows that Ti-Ga bonds in $Ti_2GaC$ are stronger than Ti-Tl bonds in $Ti_2TlC$.