• Journal of Korea Foundry Society
• /
• v.43 no.2
• /
• pp.55-63
• /
• 2023

Due to the importance of the surface on the final slab quality, it is essential to maintain a smooth segment roll surface that is in touch with the thin solid shell during solidification. In this paper, the surface of the used continuous casting guide roll was analyzed to realize the mechanism of its surface deterioration. Surface analysis has revealed severe corrosion at two distinct areas leading to deep roughness occurring on the guide roll. Firstly, the severe corrosion follows prior austenite grain boundary due to exposure with acidic environment. Also, in heat affected zone (HAZ) where two cladding beads overlap, more severe corrosion takes place. The overheat input results in local ferritization without full melting which increases retained δ-ferrite content almost 10 times higher than surrounding area. Corrosion was observed to happen at the δ-γ interface where Cr depletion takes place.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.2
• /
• pp.69-77
• /
• 2022

The 3D spatial model is an analysis framework for solving urban problems and is used in various fields such as urban planning, environment, land and housing management, and disaster simulation. The utilization of drones that can capture 3D images in a short time at a low cost is increasing for the construction of 3D spatial model. In terms of building a virtual city and utilizing simulation modules, high location accuracy of aerial survey and precision of 3D spatial model function as important factors, so a method to increase the accuracy has been proposed. This study analyzed location accuracy of aerial survey and precision of 3D spatial model by each condition of aerial survey for urban areas where buildings are densely located. We selected Daerim 2-dong, Yeongdeungpo-gu, Seoul as a target area and applied shooting angle, shooting altitude, and overlap rate as conditions for the aerial survey. In this study, we calculated the location accuracy of aerial survey by analyzing the difference between an actual survey value of CPs and a predicted value of 3D spatial Model. Also, We calculated the precision of 3D spatial Model by analyzing the difference between the position of Point cloud and the 3D spatial Model (3D Mesh). As a result of this study, the location accuracy tended to be high at a relatively high rate of overlap, but the higher the rate of overlap, the lower the precision of 3D spatial model and the higher the shooting angle, the higher precision. Also, there was no significant relationship with precision. In terms of baseline-height ratio, the precision tended to be improved as the baseline-height ratio increased.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_1
• /
• pp.1273-1283
• /
• 2022

Recently, forest fires have frequently occurred due to climate change, leading to human and property damage every year. The forest fire monitoring technique using remote sensing can obtain quick and large-scale information of fire-damaged areas. In this study, the Gangneung and Donghae forest fires that occurred in March 2022 were analyzed using the spectral band of Sentinel-2, the normalized difference vegetation index (NDVI), and the normalized difference water index (NDWI) to classify the affected areas of forest fires. The U-net based convolutional neural networks (CNNs) model was simulated for the fire-damaged areas. The accuracy of forest fire classification in Donghae and Gangneung classification was high at 97.3% (f₁=0.486, IoU=0.946). The same model used in Donghae and Gangneung was applied to Uljin and Samcheok areas to get rid of the possibility of overfitting often happen in machine learning. As a result, the portion of overlap with the forest fire damage area reported by the National Institute of Forest Science (NIFoS) was 74.4%, confirming a high level of accuracy even considering the uncertainty of the model. This study suggests that it is possible to quantitatively evaluate the classification of forest fire-damaged area using a spectral band and indices similar to that of the Compact Advanced Satellite 500 (CAS500-4) in the Sentinel-2.

• Journal of Korean Library and Information Science Society
• /
• v.53 no.4
• /
• pp.189-209
• /
• 2022

The purpose of this study is to analyze the content of the online book curation services and recommended books list by public libraries in Korea and to identify their properties. The case for analysis is a list of 11,447 recommended books provided by 35 online book curation services collected from 23 public libraries and the main results of the study are as follows. Only few case libraries were presenting recommendation themes, and recommendation targets were most often not specific, and the recommendation cycle of books was the most monthly. In general, books recommended for book curation do not overlap with each other, but there was overlap in the field of literature (novels) published in 2019~2021. For recommended books, the proportion of books published by some publishers was high, and books published in 2019~2021 were the most common. The subject areas analyzed based on the KDC 6th ed were literature the most. Readers analyzed by ISBN were of in the order of cultural books and children's books, and the type of publication was in the order of books, pucture books, and comics. Based on these research results, it was required to develop guidelines for online book curation service for public libraries and build a platform to share with libraries.

• Journal of Public Diplomacy
• /
• v.3 no.1
• /
• pp.43-63
• /
• 2023

Objectives: Nuclear security and atomic energy industry have always been the domain of political and economical diplomatic affairs. The issue of nuclear proliferation must be resolved politically or militarily given the importance of the problem, the impact it has on global security, the influence of major powers, and non-proliferation regimes. Considering scope of the budget, manpower, and scale of the project, the atomic energy issue was also viewed from an economic perspective. Therefore, the goal of this study is to depart from the conventional viewpoint and investigate if public diplomacy may be extended to a new issue domain of nuclear security and atomic energy. Methods: In order to determine whether there are any areas that overlap, the uniqueness of Korea's position in the nuclear security and atomic power domains is evaluated and compared with the traits of public diplomacy. Results: It seems plausible to broaden the scope and function of public diplomacy in that field given Korea's uniqueness in nuclear security and atomic energy issue and overlap with public diplomacy. This is especially true given that the state must take the leading role and that ongoing policy demands are made in light of Korea's security and economic structure. In reality, it is assessed that the Summer Fellows Program, run by the KAIST Nuclear Nonproliferation Education and Research Center (KAIST NEREC), has had a considerable impact on public diplomacy in the area of nuclear security and atomic energy. Conclusions: Nuclear security and atomic energy issues have traditionally been handled from the perspectives of political diplomacy, summit diplomacy, and economic diplomacy. However, this paper evaluate that the possibility of enhancing the role of public diplomacy in this issue area is high and underscore that the budget support, programs, and manpower for similar public diplomacy activities are needed. Through this, South Korea's nuclear security policy and atomic energy industry could be supported from international community and it will advance national interest.

• Advances in aircraft and spacecraft science
• /
• v.11 no.1
• /
• pp.83-103
• /
• 2024

Adhesive bonding is currently widely used in many industrial fields, particularly in the aeronautics sector. Despite its advantages over mechanical joints such as riveting and welding, adhesive bonding is mostly used for secondary structures due to its low peel strength; especially if it is simultaneously exposed to temperature and humidity; and often presence of bonding defects. In fact, during joint preparation, several types of defects can be introduced into the adhesive layer such as air bubbles, cavities, or cracks, which induce stress concentrations potentially leading to premature failure. Indeed, the presence of defects in the adhesive joint has a significant effect on adhesive stresses, which emphasizes the need for a good surface treatment. The research in this field is aimed at minimizing the stresses in the adhesive joint at its free edges by geometric modifications of the ovelapping part and/or by changing the nature of the substrates. In this study, the finite element method is used to describe the mechanical behavior of bonded joints. Thus, a three-dimensional model is made to analyze the effect of defects in the adhesive joint at areas of high stress concentrations. The analysis consists of estimating the different stresses in an adhesive joint between two 2024-T3 aluminum plates. Two types of single lap joints(SLJ) were analyzed: a standard SLJ and another modified by removing 0.2 mm of material from the thickness of one plate along the overlap length, taking into account several factors such as the applied load, shape, size and position of the defect. The obtained results clearly show that the presence of a bonding defect significantly affects stresses in the adhesive joint, which become important if the joint is subjected to a higher applied load. On the other hand, the geometric modification made to the plate considerably reduces the various stresses in the adhesive joint even in the presence of a bonding defect.

• Korean Journal of Environment and Ecology
• /
• v.21 no.3
• /
• pp.197-206
• /
• 2007

This study was conducted to survey the population of water birds wintering at the seven coastal wetlands of Jeollanam province including Suncheon Bay and Yeongsan Lake, from 2000 through 2003. The 90 species and 857,570 individuals in total were sighted at the seven survey sites. We classified the wintering water birds into seventeen groups of taxa based on the similar ecological attributes, among which, eight groups were found to inhabit the water surface or riparian areas. Classified groups that showed higher rate of using bay areas than that of lake areas were in the order of waders, gulls and swans. On the other hand, the groups that showed higher rate of using lake areas than that of using bay areas were revealed in the order of dabbling ducks, grebes and geese. In conclusion, there was a difference in the pattern between the two classified groups. As a result of the UPGMA cluster analysis using CCs ($S{\varnothing}rensen'a$ index of similarity and Ro (Horn's index of community overlap), the results showed that Suncheon Bay had the most unique species formation out of the seven areas. Bay and lake areas were different from each other in the formation of species and Individuals. As a result of combining the index rank according to the maximum aggregate count, the Suncheon Bay is ranked the highest in importance of the habitats for water birds, followed by the order of Boseong-Deukryang Bay, Gangjin Bay, Gocehongam Lake, Geumho Lake, Yeomam Lake, and Yeongsan Lake. Considered overall, the importance of the bay areas was relatively higher than that of reclaimed lake areas.

• Korean Journal of Ecology and Environment
• /
• v.52 no.2
• /
• pp.126-135
• /
• 2019

We carried out a literature review of fish food sources research in the coast - estuary areas of Korean peninsula for the last fifty years(1969~2018). A total of 101 research papers were reviewed, of which 81 were published in domestic journals, 7 were puliched in domestic reports and 14 were published in international journals. When divided into the decade periods, 21 papers (19.4%) between 1990 and 1999 and 26 papers (24.1%) between 2000 and 2009, and 42 papers (48.1%) were published in 2010 and 2018, respectively. When divided into the survey area by a bearing (East sea, South-East sea, South Sea, and West Sea), 65 papers(69.1%) were carried out in the South Sea. Followed by 13 papers (13.8%) in the East Sea and 8 papers (8.5%) in the West Sea and the South-East Sea, respectively. The surveyed area was dominant in Gwangyang Bay (18 papers; 24.3%), followed by Gadeok-do (8 papers; 10.8%). Of the diversity indices, 14 indices were used to calculate the ecological status. The dominant indices were IRI(Index of relative importance), Pi(Prey-specific abundance) followed by E (electivity index) and Bi (dietary breadth index). A total of 11 statistical methods were used to find feeding strategy. The correlation analysis and Bray-Curtis similarity matrix were applied most frequently. In terms of ecological research topics, the papers focused on seasonal or spatial differences before 2000. Since 2000, specifically, the international journal papers have been published based on competition, sympatric, niche overlap and other ecological topics.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.5
• /
• pp.335-342
• /
• 2015

In this study, data linking module called GeoSWMM was developed using a typical secondary flooding model SWMM in order to improve the accuracy of the input data of SWMM and to map hourly inundation estimation areas that were not represented in the conventional inundation map. GeoSWMM is a data linking module of GIS and SWMM, which can generate a SWMM project file directly from sewer network GIS data. Utilizing the GeoSWMM the project file of SWMM model was constructed in the study area, Seocho 2-dong, Seoul. The actual flooding has occurred September 21, 2010 and the actual rainfall data were used for flood simulation. As a result, the outflow started from 2 PM due to the lack of water flow capacity of the sewage system. Based on the results, hourly inundation estimation maps were produced and compared with flood train map in 2010. The comparison showed about 66% matching in the overlap of inundation areas. By utilizing GeoSWMM that was developed in this study, it is easy to build the sewer network data for SWMM. In addition, the creation of hourly inundation estimation map using SWMM will be much help to flood disaster prevention plan.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.4
• /
• pp.805-817
• /
• 2009

This study was to investigate central localization of neurons projecting to the urinary bladder and urinary bladder-related acupoints(Wijung, $BL_{40}$) and neurons of immunoreactive to hormones and hormone receptors regulating urinary bladder function by using peudorabies virus(PRV). In this experiment, Bartha's strain of pseudorabies virus was used in rats to trace central localization of urinary bladder-related neurons and urinary bladder-related acupoints($BL_{40}$) which can regulate urinary system. PRV was injected into the urinary bladder and acupoints($BL_{40}$) related urinary system. After six days survival of rats, mainly common labeled neurons projecting to the urinary bladder and urinary bladder-related acupoints were identified in spinal cord, medulla, pons and diencephalon by PRV immunohistochemical staining method. First-order PRV labeled neurons projecting to urinary bladder and urinary bladder-related acupoints were found in the cervical, thoracic, lumbar and sacral spinal cord. Commonly labeled preganglionic neurons were labeled in the lumbosacral spinal cord and thoracic spinal cord. They were found in the lateral horn area(sacral parasympathetic nucleus and intermediolateral nucleus), lamina V-X, intermediomedial nucleus and dorsal column area. The area of sensory neurons projecting to urinary bladder and Wijung($BL_{40}$) was L5-S2 spinal ganglia and T12-L1 spinal ganglia, respectively. In the brainstem, the neurons were labeled most evidently and consistently in the nucleus of tractus solitarius, area postrema, dorsal motor nucleus of vagus nerve, reticular nucleus, raphe nuclei(obscurus, magnus and pallidus), C3 adrenalin cells, parapyramidal area(lateral paragigantocellular nucleus), locus coeruleus, subcoeruleus nucleus, A5 cell group, Barrington's nucleus and periaqueductal gray matter. In the diencephalon, PRV labeled neurons were marked mostly in the paraventricular nucleus and a few ones were in the lateral hypothalamic nucleus, posterior hypothalamic nucleus, ventromedial hypothalamic nucleus, arcuate nucleus, median eminence, perifornical nucleus, periventricular nucleus and suprachiasmatic nucleus. In cerebral cortex, PRV labeled neurons were marked mostly in the frontal cortex, 1,2 area, hind limb area, agranular insular cortex. Immunoreactive neurons to Corticotropin releasiing factor(CRF), Corticotropin releasiing factor-receptor(CRF-R), c-fos and serotonin were a part of labeled areas among the virus-labeled neurons of urinary bladder and Wijung($BL_{40}$). The commonly labeled areas were nucleus tractus solitarius, area postrema, reticular nucleus, raphe nuclei(obscurus, magnus and pallidus), locus coeruleus, A5 cell group, Barrington,s nucleus, arcuate nucleus, paraventricular nucleus, frontal cortex 1, 2 area, hind limb, and perirhinal(agranular insular) cortex. These results suggest that overlapped CNS locations are related with autonomic nuclei which regulate the functions of urinary bladder-relate organs and it was revealed by tracing PRV labeled neurons projecting urinary bladder and urinary bladder-related acupoints. These commonly labeled areas often overlap with the neurons connected with hormones and hormone receptors related to urination.