• Journal of Welding and Joining
• /
• v.34 no.6
• /
• pp.69-74
• /
• 2016

Because the pure titanium has superior corrosion resistance and formability compared with different material, it is widely used as material of welded heat exchanger. When the welding of heat exchanger is carried out, certain area in which welding start and end are overlapped occurs. The humping of back bead is formed in the overlap area due to partial penetration. Thus in this study, the experiments were carried out by changing the length and wave shape of overlap area, and then the weldabiliay was evaluated through the observation of microstructure, the measurement of hardness and tensile-shear strength test in the overlap area. When overlap length was 9.8mm, humping bead was suppressed. The microstructure of overlap area coarsened and its hardness increased due to remelting. As a result of tensile-shear strength test in the overlap area according to applying the wave shape control, it was confirmed that the overlap area applied wave shape control had more excellent yield strength and ductility.

• Journal of Technologic Dentistry
• /
• v.19 no.1
• /
• pp.121-130
• /
• 1997

This study was aimed to help the construction of naturally dental prosthesis by investigation of the factors affecting on the attrition position and attrition angle of maxillary canines. Therefore 163 complete cast of maxillary and mandibular extracted from the student of K. college were subjected for this study, and result through the study are as follows. 1. None attrite rate of the maxillary canine was 7%, of examined teeth. 2. Throughout mesiodistal attrition of 1) Throughout mesiodistal attrition area of the maxillary canines showed that mesial area and mid area of cusp was more frequence in attrition than distal area of it. 2) Sex, dental arch type, vertical overlap, horizontal overlap, did not affect significantly to throughtout mesiodistal attrition statistically 3. Througout labiolingual attrition area 1) Throughout labiolingual attrition area of the maxillary canines showed that attrition of the from lingual to labioncisal edge was more frequence than it of linguoincisal edge 2) It showed that attrition of the from lingual to labioincisal edge was more frequence when the length of horizontal overlap is shorter, by horizontal overlap 3) The attrition of the from lingual to labioincisal edge in maxillary left canines showed that male was more frequence in attrition than female. 4) Dental arch type, vertical overlap, did not affect signioficantly to labiolingual attrition, statistically. 4. Attrition angle 1) It showed that average attrition angle of the maxillary right canines were $19{\pm}11.02$ dagree, and it of left canines were $18{\pm}11.83$ degree. 2) It showed that famale have a bigger attrition angle than male, by sex. 3) It showed that attrition angle was bigger when the length of horizontal ovelap is bigger, by horizontal overlap.

• Journal of Technologic Dentistry
• /
• v.18 no.1
• /
• pp.117-127
• /
• 1996

This study was aimed to help the construction of esthetic dental prosthesis by investigation of the factors affecting on the atterition position and attrition angle of maxillary lateral incisors. Therefore 197 complete cast of maxillary and mandibualar extracted form the student of K. college were subjected for this study, and result throught the study are as follows. 1. None attrite rate of the maxiilary right lateral incisors was about 16.2% and that of the maxillary left lateral incisors was about 32.4% of examined teeth. 2. Throught mesiodistal attrition area 1) It showed that right lateral incisors was the most frequence in attrition of mesial area of incisal edge, and left lateral incisors was the most frequence in attrition of mesial and mid area of incisal edge. 2) It showed that square type arch was more frequence in attrition of all incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and taper type arch was more frequence in the attrition of mesial area of incisal edge than it of average frequence of right lateral incisors, by dental arch type. 3) It showed that square type arch was more frequence in the attrition of all area and mid area of incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and taper type arch was more frequence in the attrition of mesial and distal area of incisal edge than it of average frequence of left lateral incisal, by dental arch type. 4) Sex, vertical overlap, horizontal overlap, incisal guide angle, did not affect significantly to throughout mesiodistal attrition, statistically 3. Throughout labiolingual attrition quantity. 1) It showed that throughout labiolingual attrition quantity was more attrition in order of taper type arch < ovoid type arch < square type arch, by dental arch type. 2) It showed that throughout labiolingual attrition qauntity was more attrition when the length of horizontal overlap is shorter than it of other, by horizontal overlap. 3) Throughout labiolingual attrition quantity of right lateral incisors showed that male was more attrition than it of female. 4) Vertical overlap, incisal guide angle, sex on left lateral incisors did not affect significantly to throughout labiolingual attrition, statistically. 4. Attrition angle 1) It showed that average attrition anlge of right lateral incisors were $30{\pm}13.02$ degree, and it of left lateral incisors were $26{\pm}13.37$ degree. 2) It showed that taper type arch have a bigger attrition angle than it of average of lateral incisors, and square tape arch have a smaller attrition angle than it of average of lateral incisors, by dental arch type. 3) It showed that horizontal overlap of 2.1mm above have a bigger attrition angle than it of average, by horizontal overlap. 4) It showed that female have a bigger attrition angle it of male, by sex.

• Journal of Integrative Natural Science
• /
• v.13 no.2
• /
• pp.83-86
• /
• 2020

In In this study, technique has been suggested according to the calculation of thresholds of histogram based on overlap areas for reducing noise while analyzing the functions of them. Suggested algorithm is to convert histogram extracted from color images to gray level and select overlap areas from extracted histogram. In addition, feature table is configured after extracting histogram in the relevant overlap area while comparing and retrieving for query and database video images by using this feature table. Suggested retrieval system has been confirmed to be more outstanding with retrieval function in video images with more noises than the system that only used color histogram.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.367-372
• /
• 2018

This paper proposed an algorithm that detects boundary nodes effectively in wireless sensor network. A boundary node is a sensor that lies on the border of network holes or the outer boundary of wireless sensor network. Proposed algorithm detects boundary nodes using only the position information of sensors. In addition, to improve detect performance, sensor computes the overlap area of nearest sensor first. Simulation is performed to validate the process of the proposed algorithm. In Simulation, several obstacles are placed and varying number of sensors in the range of 500~1500 are deployed in the area in order to reflect real world. The simulation results shows that proposed algorithm detects boundary nodes effectively that are located on the border of holes and the outer boundary of wireless sensor network.

• Korean Journal of Environment and Ecology
• /
• v.37 no.6
• /
• pp.418-428
• /
• 2023

This study was conducted to clarify the daily activity patterns overlap between hikers and mammals from 2015 to 2019 in the Baekdudaegan protected area. To investigate relationship behaviors between hikers and mammals, we set the camera traps on the ridge of the Baekdudaegan protected area. Daily activity patterns of yellow-throated marten (Martes flavigula) and Siberian chipmunk (Eutamias sibiricus) were highly overlapped with hiker total study periods. Moreover, daily activity patterns of Siberian roe deer (Caperohus pygargus) and water deer (Hydropotes inermis) were highly overlapped with hikers only in spring. In winter, daily activity patterns of wild boar (Sus scrofa) were overlapped with hikers. However, leopard cat (Prionailurus bengalensis), raccoon dog (Nyctereutes procyonoides), and Eurasian badger (Meles leucurus) did not significantly overlap with hikers during the study periods. The daily activity patterns of 8 mammals differed by species-specific behavior and temporal characteristics. Overlap of daily activity patterns between mammals and hikers were differed in each season. Differences in daily activity pattern overlap between mammals and humans may lead to differences in human impact on mammal populations. Information on the interaction between hikers and mammals on species-specific and temporal-specific behavior could be basic ecological data for management and conservation of mammal populations and their habitats.

• Journal of Korean Elementary Science Education
• /
• v.34 no.1
• /
• pp.72-85
• /
• 2015

Conception in learner's cognitive structure has a niche as species in ecosystems. The purpose of this study is to analyze the change of niche overlap of photosynthesis concept through instruction. The photosynthesis concepts were selected from literature review. Selected concepts were in 4 areas: Location of photosynthesis, reactants, products, and environmental factors. The subjects consisted 304 elementary students. The respondent marked the relevance between the presented concepts and each area on a scale of 1~30 points. The analysis of niche overlap in concepts was performed by changing in niche overlap graph, niche space size, and overlap index before and after instruction. The results are as follows. First, on the whole understanding level and relevance of the scientific concepts was increased through instruction as a result of learning. Second, elementary school students cognitive concepts in the form of chunking concepts through classification process. Based on the results, this study has the following suggestion. Students' conceptual ecologies and niche analyzed by this study will be used as material for development of instruction strategy.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.2
• /
• pp.118-123
• /
• 2016

Overlap cutting is a fundamental method of applying abrasive water jet (AWJ) machining to milling to produce a wider surface because the nozzle outlet is approximately 1.0 mm wide. In this study, the effects of overlap cutting on the depth profile and surface roughness are investigated. The overlapping area depends on the amount of step over, which is controlled in the pick-feed direction. If the step over is equal to or larger than the diameter of the nozzle, no overlap cut occurs but large cusps remain between the cut paths. A step over as small as one-thirds of the nozzle diameter may lead to triple-overlap cutting resulting in an extraordinary depth. By using pocket milling experiments with a step over of 0.46 (or 0.47), it is verified that AWJ can produce a milled surface of titanium, one of the hard-to-cut materials, with $76{\mu}m$ Ra.

• Aerospace Engineering and Technology
• /
• v.10 no.2
• /
• pp.154-162
• /
• 2011

The KOrea Multi-Purpose Satellite-3 (KOMPSAT-3) provides 0.7 m Ground Sample Distance (GSD) panchromatic image and 2.8 m GSD multi-spectral image data for various applications. The KOMPSAT-3 system data will be applied in the field of earth observations, covering land, sea, coastal zones, and Geographic Information Systems (GIS). In order to keep the swath width of 15km at nadir view of KOMPSAT-3, CCD consist of approximately 24,020 pixels excluding 20 dark pixels at both sides and has overlap region. Because there are no CCD-line sensors with a pixel size of $7{\mu}m$, the field of view is separated into 2 parts and imaged on 2 detectors, each with 12,080 pixels. Therefore, 2 detectors have different geometric characteristic. This paper provides image simulation for geometric characteristics analysis of overlapping area of KOMPSAT-3 using KOMPSAT-2 image data.

• Journal of Environmental Science International
• /
• v.29 no.10
• /
• pp.951-959
• /
• 2020

This study aimed to re-establish the conservation area reflecting landscape ecological value through scenario program, targeting Odaesan National Park. The basic data were mapped in watershed planning units, which were set considering topographical and ecological values. The framework of Marxan with Zones, using an indexation process, was using the mapped indicators. Each best solution according to the scenarios was assessed through sensitivity analysis, and a final solution was selected among the best solutions, considering criteria including area ratio of conservation area and grouping. Lastly, the final solution was verified in the overlap analysis with recent zonation. As a result, through the framework of Marxan with Zones, the best solution of scenario 1, which was set by the highest conservation criteria was selected as the final solution, and the area ratio of conservation area and grouping was excellent. As for the overlap analysis, the suggested conservation area was improved compared to recent zonation in terms of the area ratio (39.4%), biotope grade I (35.6%) and the distribution points (7 places) of legally protected species.