• Journal of Welding and Joining
• /
• 제34권6호
• /
• pp.69-74
• /
• 2016

Because the pure titanium has superior corrosion resistance and formability compared with different material, it is widely used as material of welded heat exchanger. When the welding of heat exchanger is carried out, certain area in which welding start and end are overlapped occurs. The humping of back bead is formed in the overlap area due to partial penetration. Thus in this study, the experiments were carried out by changing the length and wave shape of overlap area, and then the weldabiliay was evaluated through the observation of microstructure, the measurement of hardness and tensile-shear strength test in the overlap area. When overlap length was 9.8mm, humping bead was suppressed. The microstructure of overlap area coarsened and its hardness increased due to remelting. As a result of tensile-shear strength test in the overlap area according to applying the wave shape control, it was confirmed that the overlap area applied wave shape control had more excellent yield strength and ductility.

• 대한치과기공학회지
• /
• 제19권1호
• /
• pp.121-130
• /
• 1997

This study was aimed to help the construction of naturally dental prosthesis by investigation of the factors affecting on the attrition position and attrition angle of maxillary canines. Therefore 163 complete cast of maxillary and mandibular extracted from the student of K. college were subjected for this study, and result through the study are as follows. 1. None attrite rate of the maxillary canine was 7%, of examined teeth. 2. Throughout mesiodistal attrition of 1) Throughout mesiodistal attrition area of the maxillary canines showed that mesial area and mid area of cusp was more frequence in attrition than distal area of it. 2) Sex, dental arch type, vertical overlap, horizontal overlap, did not affect significantly to throughtout mesiodistal attrition statistically 3. Througout labiolingual attrition area 1) Throughout labiolingual attrition area of the maxillary canines showed that attrition of the from lingual to labioncisal edge was more frequence than it of linguoincisal edge 2) It showed that attrition of the from lingual to labioincisal edge was more frequence when the length of horizontal overlap is shorter, by horizontal overlap 3) The attrition of the from lingual to labioincisal edge in maxillary left canines showed that male was more frequence in attrition than female. 4) Dental arch type, vertical overlap, did not affect signioficantly to labiolingual attrition, statistically. 4. Attrition angle 1) It showed that average attrition angle of the maxillary right canines were $19{\pm}11.02$ dagree, and it of left canines were $18{\pm}11.83$ degree. 2) It showed that famale have a bigger attrition angle than male, by sex. 3) It showed that attrition angle was bigger when the length of horizontal ovelap is bigger, by horizontal overlap.

• 대한치과기공학회지
• /
• 제18권1호
• /
• pp.117-127
• /
• 1996

This study was aimed to help the construction of esthetic dental prosthesis by investigation of the factors affecting on the atterition position and attrition angle of maxillary lateral incisors. Therefore 197 complete cast of maxillary and mandibualar extracted form the student of K. college were subjected for this study, and result throught the study are as follows. 1. None attrite rate of the maxiilary right lateral incisors was about 16.2% and that of the maxillary left lateral incisors was about 32.4% of examined teeth. 2. Throught mesiodistal attrition area 1) It showed that right lateral incisors was the most frequence in attrition of mesial area of incisal edge, and left lateral incisors was the most frequence in attrition of mesial and mid area of incisal edge. 2) It showed that square type arch was more frequence in attrition of all incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and taper type arch was more frequence in the attrition of mesial area of incisal edge than it of average frequence of right lateral incisors, by dental arch type. 3) It showed that square type arch was more frequence in the attrition of all area and mid area of incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and taper type arch was more frequence in the attrition of mesial and distal area of incisal edge than it of average frequence of left lateral incisal, by dental arch type. 4) Sex, vertical overlap, horizontal overlap, incisal guide angle, did not affect significantly to throughout mesiodistal attrition, statistically 3. Throughout labiolingual attrition quantity. 1) It showed that throughout labiolingual attrition quantity was more attrition in order of taper type arch < ovoid type arch < square type arch, by dental arch type. 2) It showed that throughout labiolingual attrition qauntity was more attrition when the length of horizontal overlap is shorter than it of other, by horizontal overlap. 3) Throughout labiolingual attrition quantity of right lateral incisors showed that male was more attrition than it of female. 4) Vertical overlap, incisal guide angle, sex on left lateral incisors did not affect significantly to throughout labiolingual attrition, statistically. 4. Attrition angle 1) It showed that average attrition anlge of right lateral incisors were $30{\pm}13.02$ degree, and it of left lateral incisors were $26{\pm}13.37$ degree. 2) It showed that taper type arch have a bigger attrition angle than it of average of lateral incisors, and square tape arch have a smaller attrition angle than it of average of lateral incisors, by dental arch type. 3) It showed that horizontal overlap of 2.1mm above have a bigger attrition angle than it of average, by horizontal overlap. 4) It showed that female have a bigger attrition angle it of male, by sex.

• 통합자연과학논문집
• /
• 제13권2호
• /
• pp.83-86
• /
• 2020

In In this study, technique has been suggested according to the calculation of thresholds of histogram based on overlap areas for reducing noise while analyzing the functions of them. Suggested algorithm is to convert histogram extracted from color images to gray level and select overlap areas from extracted histogram. In addition, feature table is configured after extracting histogram in the relevant overlap area while comparing and retrieving for query and database video images by using this feature table. Suggested retrieval system has been confirmed to be more outstanding with retrieval function in video images with more noises than the system that only used color histogram.

• 문화기술의 융합
• /
• 제4권4호
• /
• pp.367-372
• /
• 2018

본 논문은 무선 센서 네트워크의 경계노드를 효과적으로 검출하는 알고리즘을 제안한다. 경계노드는 센서 네트워크의 외부 경계 또는 홀의 경계에 존재하는 센서이다. 제안한 알고리즘은 센서의 위치정보만을 이용하여 네트워크의 경계노드를 검출한다. 또한 검출 속도를 향상시키기 위해 센서는 거리에 따라 근접한 센서와의 중첩영역을 먼저 계산한다. 알고리즘의 동작을 검증하기 위해 시뮬레이션을 수행하였다. 시뮬레이션에서 현실 세계를 최대한 반영하기 위해 정해진 영역에 여러 개의 장애물을 설치하고 센서의 개수를 500~1500개 범위에서 다르게 배치하였다. 시뮬레이션을 통하여 제안한 알고리즘이 네트워크 외부 및 홀의 경계에 존재하는 경계노드들을 효과적으로 검출하는 것을 확인하였다.

• 한국환경생태학회지
• /
• 제37권6호
• /
• pp.418-428
• /
• 2023

본 연구는 백두대간보호지역에 서식하는 포유류와 등산객의 일중 활동 주기의 비교를 통해 시간적 규모에 따른 포유류 군집의 잠재적 위험성 검증을 위해 수행되었다. 이를 위해 2015년부터 2019년까지 백두대간보호지역의 능선부를 대상으로 무인센서카메라를 활용하여 등산객과 포유류의 활동 주기를 분석하였다. 조사 결과 담비와 다람쥐의 활동 주기는 연중 등산객의 활동 주기와 높게 중첩되었다. 또한, 노루와 고라니는 봄에 등산객의 활동 주기와 높게 중첩되며, 멧돼지는 겨울에 등산객의 활동 주기와 높게 중첩되었다. 삵과 너구리, 오소리의 일중 활동 주기는 전체기간 동안 등산객의 활동 주기와 중첩되지 않았다. 포유류의 일중 활동 주기는 종 특이적 행동 패턴과 계절에 따라 차이를 보이며, 그에 따라 등산객의 활동 주기와 중첩에 차이를 보였다. 종 특이적 행동 특성과 계절에 따른 행동의 차이로 인해 백두대간보호지역에 서식하는 포유류는 인간의 활동에 의한 간섭에 대한 영향은 차이가 발생할 것으로 예상된다. 본 연구 결과 백두대간보호지역에 서식하는 포유류의 종 특이적 행동 특성에 관한 기초자료의 제공과 더불어 종과 계절에 따른 포유류 군집의 안정성 확보를 위한 관리 및 보전 방안의 수립을 위한 기초자료로써 의미를 가진다고 판단된다.

• 한국초등과학교육학회지:초등과학교육
• /
• 제34권1호
• /
• pp.72-85
• /
• 2015

Conception in learner's cognitive structure has a niche as species in ecosystems. The purpose of this study is to analyze the change of niche overlap of photosynthesis concept through instruction. The photosynthesis concepts were selected from literature review. Selected concepts were in 4 areas: Location of photosynthesis, reactants, products, and environmental factors. The subjects consisted 304 elementary students. The respondent marked the relevance between the presented concepts and each area on a scale of 1~30 points. The analysis of niche overlap in concepts was performed by changing in niche overlap graph, niche space size, and overlap index before and after instruction. The results are as follows. First, on the whole understanding level and relevance of the scientific concepts was increased through instruction as a result of learning. Second, elementary school students cognitive concepts in the form of chunking concepts through classification process. Based on the results, this study has the following suggestion. Students' conceptual ecologies and niche analyzed by this study will be used as material for development of instruction strategy.

• 한국생산제조학회지
• /
• 제25권2호
• /
• pp.118-123
• /
• 2016

Overlap cutting is a fundamental method of applying abrasive water jet (AWJ) machining to milling to produce a wider surface because the nozzle outlet is approximately 1.0 mm wide. In this study, the effects of overlap cutting on the depth profile and surface roughness are investigated. The overlapping area depends on the amount of step over, which is controlled in the pick-feed direction. If the step over is equal to or larger than the diameter of the nozzle, no overlap cut occurs but large cusps remain between the cut paths. A step over as small as one-thirds of the nozzle diameter may lead to triple-overlap cutting resulting in an extraordinary depth. By using pocket milling experiments with a step over of 0.46 (or 0.47), it is verified that AWJ can produce a milled surface of titanium, one of the hard-to-cut materials, with $76{\mu}m$ Ra.

• 항공우주기술
• /
• 제10권2호
• /
• pp.154-162
• /
• 2011

다목적실용위성 3호는 고해상도 0.7m 흑백영상을 촬영할 수 있는 PAN 카메라와 2.8m 다중파장대의 칼라 영상을 수집할 수 있는 멀티스펙터럴 카메라를 탑재하고 있다. 이를 통하여 취득한 위성영상은 국토관리, 농업, 환경, 해양감시 및 GIS등의 광범위한 분야에 활용될 예정이다. 다목적실용위성3호의 15km의 관측폭을 가지는 영상을 생성하기 위해, 각 detector의 양 끝단의 20 pixel을 제외하고 24,020 픽셀로 구성된다. 이러한 크기의 CCD를 하나의 CCD로 구성하는 것은 매우 어렵기 때문에 다목적실용위성 3호는 12,080 픽셀로 구성된 두 detector로 구성되며, 따라서 두 detector의 기하학적 특성이 각기 다른 특징을 가지게 된다. 본 연구에서는 다목적실용위성3호의 한 밴드내의 기하학적 특성을 분석하기 위한 시뮬레이션 영상의 생성과정을 서술하고자 한다.

• 한국환경과학회지
• /
• 제29권10호
• /
• pp.951-959
• /
• 2020

This study aimed to re-establish the conservation area reflecting landscape ecological value through scenario program, targeting Odaesan National Park. The basic data were mapped in watershed planning units, which were set considering topographical and ecological values. The framework of Marxan with Zones, using an indexation process, was using the mapped indicators. Each best solution according to the scenarios was assessed through sensitivity analysis, and a final solution was selected among the best solutions, considering criteria including area ratio of conservation area and grouping. Lastly, the final solution was verified in the overlap analysis with recent zonation. As a result, through the framework of Marxan with Zones, the best solution of scenario 1, which was set by the highest conservation criteria was selected as the final solution, and the area ratio of conservation area and grouping was excellent. As for the overlap analysis, the suggested conservation area was improved compared to recent zonation in terms of the area ratio (39.4%), biotope grade I (35.6%) and the distribution points (7 places) of legally protected species.