• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.150.2-150.2
• /
• 2015

In this study, we analyzed the electric and optical characteristics by using various deposition rate ($0.5{\AA}$, $1.0{\AA}$ and $1.5{\AA}/s$) in order to enhance the performance in organic light-emitting devices (OLED). The organic multi-layer structures were deposited with NPB ($500{\AA}$ as hole transport layer), Alq3 ($600{\AA}$ as electron transport layer and emission layer) and LiF ($8{\AA}$ as electron injection layer) via SUNIC PLUS200 on Glass/ITO substrates. In this experiment, we examined the relationship between porous state of organic deposition and mobility of the organic materials. Among the three deposition rates, $0.5{\AA}/s$ achieved the highest performance of (10,786cd/m2, 4.387cd/A) comparing with that of $1{\AA}/s$ (7,779cd/m2, 3.281cd/A) and $1.5{\AA}/s$ (5,167cd/m2, 2.693cd/A). We confirmed that low deposition rate helps to arrange organic materials densely and to move easily another atomic location using inter-chain transporting by orbital overlap.

• 한국콘텐츠학회논문지
• /
• 제12권2호
• /
• pp.1-9
• /
• 2012

본 논문은 가중 퍼지소속함수 기반 신경망 (Neural Network with Weighted Fuzzy Membership functions, NEWFM)과 심박수 변이도(Heart Rate Variability, HRV)를 이용하여 우울증 진단알고리즘을 제안하고 있다. 본 알고리즘에서 사용할 NEWFM의 입력특징을 추출하기 위해서 주파수도메인 특징추출, 시간도메인 특징추출, 웨이블릿변환 특징추출, 포인케어변환 특징추출 방법을 이용하여 22개의 초기 HRV 특징들을 추출하였다. 또한 NEWFM에서 제공하는 비중복면적 분산측정법 (Non-overlap Area Distribution Measurement, NADM)에 의해 입력특징의 중요도를 평가하여 22개의 초기특징으로부터 중요도가 가장 높은 6개 최적입력특징을 선택하였다. 이 6개 특징을 이용하여 우울증을 진단한 결과는 95.8% 의 정확도를 나타내었다.

• 대한치과기공학회지
• /
• 제18권1호
• /
• pp.117-127
• /
• 1996

This study was aimed to help the construction of esthetic dental prosthesis by investigation of the factors affecting on the atterition position and attrition angle of maxillary lateral incisors. Therefore 197 complete cast of maxillary and mandibualar extracted form the student of K. college were subjected for this study, and result throught the study are as follows. 1. None attrite rate of the maxiilary right lateral incisors was about 16.2% and that of the maxillary left lateral incisors was about 32.4% of examined teeth. 2. Throught mesiodistal attrition area 1) It showed that right lateral incisors was the most frequence in attrition of mesial area of incisal edge, and left lateral incisors was the most frequence in attrition of mesial and mid area of incisal edge. 2) It showed that square type arch was more frequence in attrition of all incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and taper type arch was more frequence in the attrition of mesial area of incisal edge than it of average frequence of right lateral incisors, by dental arch type. 3) It showed that square type arch was more frequence in the attrition of all area and mid area of incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and taper type arch was more frequence in the attrition of mesial and distal area of incisal edge than it of average frequence of left lateral incisal, by dental arch type. 4) Sex, vertical overlap, horizontal overlap, incisal guide angle, did not affect significantly to throughout mesiodistal attrition, statistically 3. Throughout labiolingual attrition quantity. 1) It showed that throughout labiolingual attrition quantity was more attrition in order of taper type arch < ovoid type arch < square type arch, by dental arch type. 2) It showed that throughout labiolingual attrition qauntity was more attrition when the length of horizontal overlap is shorter than it of other, by horizontal overlap. 3) Throughout labiolingual attrition quantity of right lateral incisors showed that male was more attrition than it of female. 4) Vertical overlap, incisal guide angle, sex on left lateral incisors did not affect significantly to throughout labiolingual attrition, statistically. 4. Attrition angle 1) It showed that average attrition anlge of right lateral incisors were $30{\pm}13.02$ degree, and it of left lateral incisors were $26{\pm}13.37$ degree. 2) It showed that taper type arch have a bigger attrition angle than it of average of lateral incisors, and square tape arch have a smaller attrition angle than it of average of lateral incisors, by dental arch type. 3) It showed that horizontal overlap of 2.1mm above have a bigger attrition angle than it of average, by horizontal overlap. 4) It showed that female have a bigger attrition angle it of male, by sex.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.676-679
• /
• 1999

In this paper, we presents a method to control prosody of the synthetic speech using sampling rate conversion technique. In prosody control, the conventional methods perform overlap and add. So the synthetic speech has a distortion and the voice quality is not satisfied. Using sampling rate conversion technique, we can get high Qualify of the synthetic speech. Also we can control various talking speeds according to speaker's patterns.

• 한국지반신소재학회논문집
• /
• 제17권4호
• /
• pp.109-118
• /
• 2018

현재 개발 중에 있는 2열 겹침주열말뚝은 대심도 굴착 시 적용을 위해 2열의 말뚝을 통해 강성을 크게 증대시키고 말뚝 간 엇갈림 겹침부를 통한 연속성 확보로 추가의 그라우팅이 없이 차수벽 역할을 할 수 있도록 고안된 흙막이 벽체이다. 이 벽체는 기존의 주열말뚝벽체에 비해 2열 엇갈림 말뚝 시공으로 단면 형상이 복잡하여 기존의 주열말뚝벽체들에 비해 휨 강성 등 단면 조건에 좌우되는 설계인자의 결정이 용이하지 않다. 본 연구에서는 2열 겹침주열말뚝의 다양한 단면 조건들에 대해서 이론적 방법과 통계적 분석을 통해 간단한 단면 제원, 즉, 말뚝의 직경과 말뚝 간 겹침길이를 이용해 흙막이 벽체의 중요 설계 인자인 휨 강성을 간편하게 산정할 수 있는 계산식을 유도하였다. 개발된 간편 휨강성 산정식은 정밀하게 계산된 휨 강성과 비교해 오차율 3% 이하인 것으로 나타났다.

• 한국컴퓨터그래픽스학회논문지
• /
• 제24권5호
• /
• pp.11-19
• /
• 2018

본 논문에서는 노이즈를 포함한 채 오버랩 영역이 적은 두 점군을 정합할 때 정확도와 수렴 속도를 향상시키는 알고리즘을 제시한다. 정확도를 높이기 위하여 점군의 기하학 정보를 최대한 활용하며, 정합 단계에서는 노이즈가 포함된 점군에서 오버랩 되는 영역을 적절히 선택하고, 개선된 가속 알고리즘을 사용하여 정합 속도를 향상시킨다. 정확도를 향상시키는 기존의 방법은 노이즈가 많은 점군에 적용할 수 없으므로, 본 논문에서는 정합에 사용되는 영역을 선택하는 것으로써 기존 방법의 문제를 해결하였다. 또한 똑같은 점군쌍에서만 적용되는 가속 알고리즘을 낮은 오버랩의 점군쌍에 적용하였다. 기존의 방법에 간단한 알고리즘을 추가함으로써 서너 배 더 빠른 수렴 속도를 낼 수 있도록 하였다. 결론적으로, 노이즈가 많고 오버랩이 적은 점군쌍의 정합에 있어서 본 논문에서 제시하는 알고리즘을 적용하면 속도와 정확도가 향상되었음을 알 수 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권2호
• /
• pp.315-322
• /
• 2008

Titanium and its alloys have excellent corrosion resistance, high strength to weight ratios and creep properties in high temperature, which make them using many various fields of application. Especially, pure titanium, which has outstanding resistance for the stress corrosion cracking, crevice corrosion, pitting and microbiologically influenced corrosion, brings out to the best material for the heat exchanger, ballast tank, desalination facilities, and so on. Responding to these needs, welding processes for titanium are also being used GTAW, GMAW, PAW, EBW, LBW, resistance welding and diffusion bonding, etc. However, titanium is very active and highly susceptible to embrittlement by oxygen, nitrogen, hydrogen and carbon at high temperature, so it needs to shield the weld metal from the air and these gases during welding by non-active gas. In this study, it was possible to get sound beads without humping and spatter with a decrease of peak power according to increase of pulse width, change of welding speed and overlap rate for heat input control, and shield conditions at pulsed laser welding of titanium plates for Lap welding.

• 한국광학회지
• /
• 제4권1호
• /
• pp.101-107
• /
• 1993

3준위 레이저 rate equation 및 overlap integral로부터 파장 1.48 ${\mu}m$에서 여기된 E$r^{3+}$ 첨가 광섬유 광증폭기를 위한 광섬유 매개 변수의 최적 조건을 계산하였다. 이 계산으로부터 Er3+ 첨가 광섬유 광섬유 광증폭기의 소신호 이득(small signal gain) 특성을 개구수 (N.A.), V값, 광섬유 길이, 차단 파장(cutoff wavelength) 등의 함수로 알아 보았으며 또한, 최대 소신호 이득을 갖기 위한 광섬유 매개 변수를 결정하였다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1998년도 학술발표대회 논문집 제17권 2호
• /
• pp.27-30
• /
• 1998

본 연구에서는 청각계의 시간 및 주파수 특성을 고려한 과도음의 시간-주파수 신호해석 기법인 VFT-STFT (STFT with Variable Frequency Resollution)을 제안하고자 한다. VFT-STFT은 downsampling와 FFT를 반복적으로 수행하여 주파수 대역에 따라 주파수 및 시간 분해능이 청각계의 특성과 유사한 기존의 VFR-FFT에 그 뿌리를 두고 있다. 그러나, 본 연구에서는 기존의 VFT-FFT 알고리즘에 overlap인자를 도입하여 시간-주파수 해석 결과를 구하고, 2/3-rate resampling에 의해 추가로 구성된 시간-주파수 해석 결과의 일부를 기존의 시간-주파수 해석 결과에 이식시킴으로서 기존의 VFT-FFT가 갖는 overlap과 spectral loss 등의 문제점을 최소화하고자 한다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년도 춘계 학술대회 개요집
• /
• pp.59-61
• /
• 2006

The $CO_2$ laser cladding was conducted on an AC2B alloy with feeding Fe-based powders. A powder feeding rate (PFR) and a travel velocity were related with the cracks adjacent to the Fe/Al interface. Preheating temperature was varied to study the interface crack. Preheating to $250^{\circ}C$ during the laser cladding suppressed the interface crack ratio (ICR). The ICR was limited for the single pass clad and the reciprocating test for the slide wear was conducted on an overlay cladding experiment. Comparing with no overlap overlay, the overlay clad with 50% overlap showed better wear resistance.