• Journal of radiological science and technology
• /
• v.43 no.3
• /
• pp.161-167
• /
• 2020

This study aimed to found out the effect of patellofemoral overlap distance by changing femur thickness and center X-ray angles in Merchant method images. Based on the femur thickness, it suggested tube angle minimizes overlap. It was conducted by Merchant method, a knee tangential view, and the image was obtained by changing the thigh thickness from 14 to 20 cm and the center ray angle from 60°, 57°, 55°. The images were measured by five researchers using a method of measuring the overlap, which was designed by them. The results showed at 60°, 57°, 55° angle, the patellofemoral overlap distance resulted in 0.47±0.66 to 20.89±0.65 cm, 2.26±0.28 to 15.73±0.62 cm, 1.39 ± 0.83 to 12.49 ± 0.37 cm. However, for 57° and 55°, no overlap in thickness under 14.5 and 14 to 15.5 didn't appear. it showed high correlation between femur thickness and overlap. The difference in the mean value of overlap in each group showed a statistically significant difference (p<0.01), all were classified as independent groups in the post-hoc test. In all images, the patellofemoral overlap distance increased as the thickness increased, and at the average thickness of Korean men and women, overlap decreased when reducing center ray. When conducting Merchant tests on Koreans, it was suggested it would be useful to use 57° angle because it minimize the effects of overlap and intrusions of tibia.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.10
• /
• pp.1300-1308
• /
• 2000

The objectives of this study was to investigate the spray characteristics of single spray and twin spray in the overlap region such as mean axial velocity, mean radial velocity, mean droplet size and probability density function of droplet size. A phase doppler anemometer was used as the measurement system for droplet size and velocity. In case of single spray, injection pressure was varied from 0.2MPa to 0.7MPa. Mean axial velocity, mean radial velocity and droplet size were decreased as the distance below nozzle tip was increased. In case of twin spray, the spray characteristics were measured by varying the distance between two nozzles from 127mm to 155mm. In the overlap region, the boundary of the overlap region was determined by obtaining the distribution of mean axial and radial velocity. Droplet size was increased as the distance from nozzle tip was increased. It was found that the distribution of droplet size for twin spray in the overlap region was different to single spray.

• International Journal of Aeronautical and Space Sciences
• /
• v.10 no.2
• /
• pp.63-76
• /
• 2009

A study on the interference effects of overlapping tandem rotors in forward flight is conducted using the time-marching free-wake panel method which adopts field velocity boundary integral formulation. The conventional boundary integral formulation is numerically unstable for the cases when the blade and the wake are in close proximity to each other. In order to avoid this problem, this study applies the field velocity method and modifies the boundary integration formulation. The improved method is used for the parametric study on the advance ratio and the distance between the rotors. These are the parameters that most affect the interference of the tandem rotor in forward flight. Comparison of the aerodynamic performance shows that the horizontal distance between the rotors negligibly influences the overlap-induced power factor for high advance ratio. In addition, it shows that the overlap-induced power factor is inversely proportional to the squared vertical distance between the rotors, and that the overlap-induced power factor increases to a certain extent and decrease back as the advance ratio increases.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.4
• /
• pp.455-460
• /
• 2003

A new cluster validity index is proposed that determines the optimal partition and optimal number of clusters for fuzzy partitions obtained from the fuzzy c-means algorithm. The proposed validity index exploits an overlap measure and a separation measure between clusters. The overlap measure is obtained by computing an inter-cluster overlap. The separation measure is obtained by computing a distance between fuzzy clusters. A good fuzzy partition is expected to have a low degree of overlap and a larger separation distance. Testing of the proposed index and nine previously formulated indexes on well-known data sets showed the superior effectiveness and reliability of the proposed index in comparison to other indexes.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.5
• /
• pp.450-458
• /
• 2009

The range-dependent overlap factor of a lidar system can be determined experimentally if a Raman backscatter signal by molecule is measured in addition to the usually observed elastic backscatter signal, which consists of a molecular component and a particle component. The direct determination of the overlap profile is presented and applied to a lidar measurement according to variation of telescope field-of-view and distance between telescope and transmitting laser. The retrieval of extinction coefficient by Raman method can generate high errors for heights below planetary boundary layer if the overlap effect is ignored. The overlap correction method presented here has been successfully applied to experimental data obtained in Gwangju, Korea.

• MALSORI
• /
• no.56
• /
• pp.225-235
• /
• 2005

Speech unit concatenation with a large database is presently the most popular method for speech synthesis. In this approach, the mismatches at the unit boundaries are unavoidable and become one of the reasons for quality degradation. This paper proposes an algorithm to reduce undesired discontinuities between the subsequent units. Optimal matching points are calculated in two steps. Firstly, the fullback-Leibler distance measurement is utilized for the spectral matching, then the unit sliding and the overlap windowing are used for the waveform matching. The proposed algorithm is implemented for the corpus-based unit concatenating Korean text-to-speech system that has an automatically labeled database. Experimental results show that our algorithm is fairly better than the raw concatenation or the overlap smoothing method.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.7
• /
• pp.500-505
• /
• 2012

In this study, the influence of the intermolecular distance on the charge mobility in a pentacene thin-film was investigated. In order to increase the mobility which depends on the ${\pi}$-overlap between molecules, the intermolecular distance was shortened by compressive force along the conduction channel. Pentacene thin-film was fabricated on flexible substrates bent outward at different radii to stretch the gate dielectric surface and then the substrates were unbent, producing the compressive force to the film. The result showed that the mobility increased proportionally to the strain applied during the pentacene deposition and the molecular packing inside a grain was not optimal for the charge transport.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.27 no.2
• /
• pp.146-159
• /
• 2023

This paper proposes a hybrid algorithm combining K-means clustering and watershed algorithms for flower segmentation and counting. We use the K-means clustering algorithm to obtain the main colors in a complex background according to the cluster centers and then take a color space transformation to extract pixel values for the hue, saturation, and value of flower color. Next, we apply the threshold segmentation technique to segment flowers precisely and obtain the binary image of flowers. Based on this, we take the Euclidean distance transformation to obtain the distance map and apply it to find the local maxima of the connected components. Afterward, the proposed algorithm adaptively determines a minimum distance between each peak and apply it to label connected components using the watershed segmentation with eight-connectivity. On a dataset of 30 images, the test results reveal that the proposed method is more efficient and precise for the counting of overlapped flowers ignoring the degree of overlap, number of overlap, and relatively irregular shape.

• Journal of Mechanical Science and Technology
• /
• v.17 no.6
• /
• pp.870-878
• /
• 2003

The scale is removed from the strip by high pressure hydraulic descaling at the FSB (Finishing Scale Breaker). Recently, the spray height of nozzle has a trend to be shorter for the purpose of increasing the impact pressure by the high pressure water jet. Here, the nozzle intervals should be decided after considering the impact pressure and the temperature distribution on the strip. In other words, the minimum of impact pressure at the overlap of spray influences the surface grade of the strip due to scale and the overlap distance of the spray affects the temperature variation in the direction of the width of strip. In the present study, the impact pressure of the high pressure water jet is measured by the hydraulic descaling system and calculated with regard to the lead angle of 15$^{\circ}$ and the offset angle of 15$^{\circ}$, and then the temperature distribution and the temperature variation are calculated at the overlap distances of 0 mm, 10 mm, 20 mm, and 30 mm, respectively. The method of setting nozzle intervals is shown by utilizing these results.

• Phonetics and Speech Sciences
• /
• v.11 no.3
• /
• pp.31-38
• /
• 2019

The current electromagnetic articulography study analyzes several articulatory measures and examines whether, and if so, how they are interconnected, with a focus on cluster types and an additional consideration of speech rates and morphosyntactic contexts. Using articulatory data on non-assimilating contexts from three Seoul-Korean speakers, we examine how speaker-dependent gestural overlap between C1 and C2 in a low vowel context (/a/-to-/a/) and their resulting intergestural coordination are realized. Examining three C1C2 sequences (/k(#)t/, /k(#)p/, and /p(#)t/), we found that three normalized gestural overlap measures (movement onset lag, constriction onset lag, and constriction plateau lag) were correlated with one another for all speakers. Limiting the scope of analysis to C1 velar stop (/k(#)t/ and /k(#)p/), the results are recapitulated as follows. First, for two speakers (K1 and K3), i) longer normalized constriction plateau lags (i.e., less gestural overlap) were observed in the pre-/t/ context, compared to the pre-/p/ (/k(#)t/>/k(#)p/), ii) the tongue dorsum at the constriction offset of C1 in the pre-/t/ contexts was more anterior, and iii) these two variables are correlated. Second, the three speakers consistently showed greater horizontal distance between the vertical tongue dorsum and the vertical tongue tip position in /k(#)t/ sequences when it was measured at the time of constriction onset of C2 (/k(#)t/>/k(#)p/): the tongue tip completed its constriction onset by extending further forward in the pre-/t/ contexts than the uncontrolled tongue tip articulator in the pre-/p/ contexts (/k(#)t/>/k(#)p/). Finally, most speakers demonstrated less variability in the horizontal distance of the lingual-lingual sequences, which were taken as the active articulators (/k(#)t/=/k(#)p/ for K1; /k(#)t/