• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.41-46
• /
• 1999

In the practice , ET was mainly estimated by Blaney-Criddle or FAO Penman method. But these methods were found to frequently overestimate ET. And calculation of effective rainfall by empirical formula is hardly to explain drop property and soil texture. Since 1990, FAO recommended the adoption of Penman-Moneteith combination method as a new standard for reference ET. Purpose of this study is establish new estimate method of upland crop requirements. We asopt P-M method to estimate ET and set up soil moisture balance equation to equation to calculate effective rainfall and irrigation water requirements. We expect that this new method rise efficiency to upland water management.

• 콘크리트학회논문집
• /
• 제11권4호
• /
• pp.73-81
• /
• 1999

The present study is to examine the ACI code equations for computing the unbonded tendon stress at flexural failure of prestressed beams. The equations examined for their validity are Eq. 18-4 and Eq. 18-5 of the ACI 318-95. Since the possibility of overestimation was expected with the equations, a numerical study, first, was carried out with influential variables included. From this study, it was found that amount of reinforcements, effective prestress, location of tendons, and loading type may affect the overestimation of the unbonded tendon stress. Then, an experimental study was carried out with those variables. A total of 8 specimens was tested to prove the theoretical findings as well as the effect of those variables. As a result. it was proven that the ACI Code equations can overestimate significantly the unbonded tendon stress for certain cases.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.537-544
• /
• 2009

Several domestic and foreign design methods for rock socketed drilled shafts were introduced in this study. In order to verify these design methods, the results of field pile load tests were compared with predicted capacities using them. Based on this study, AASHTO(1996) and FHWA(1999) design methods tend to underestimate, and CFEM(2006) and NAVFAC(1982) tend to overestimate. The difference between the predicted and measured values was caused by reflecting different rock socket geometry and also different rock properties in each design method.

• 가정과삶의질연구
• /
• 제17권1호
• /
• pp.73-86
• /
• 1999

The aim of this study is to suggest theoretical foundations on which hospital employees could estimate medical care services not in the position of providers but consumers. For this purpose this study compares satisfaction of providers but consumers. For this purpose this study compares satisfaction of patients with medical care service with that of hospital employees. 287 patients and 261 employees in three university hospitals in Daegu were selected as samples of investigation and asked questions. Statistical analysis was taken using SAS package. The result of this study are as follows. 1) Among the five fields of medical services patients and hospital employees have different views in doctor hospital staff(except doctor) treatment system availability service but parking service 2) Hospital employees overestimate the level of medical care services compared with patients 3) Demographical variables make a difference in medical satisfaction 4) In satisfaction-evaluation after r ceiving treatment medical system service is influential variables in both patients and hospital employees. And in patient group doctor service is following variables while availability and parking service is influential variables in employees.

• Journal of Information Processing Systems
• /
• 제7권1호
• /
• pp.1-16
• /
• 2011

With the increasing number of vehicles in use in our daily life and the rise of traffic congestion problems, many methods and models have been developed for real time optimisation of traffic lights. Nevertheless, most methods which consider real time physical queue sizes of vehicles waiting for green lights overestimate the optimal cycle length for such real traffic control. This paper deals with the development of a generic hybrid model describing both physical traffic flows and control of signalised intersections. The firing times assigned to the transitions of the control part are considered dynamic and are calculated by a simplified optimisation method. This method is based on splitting green times proportionally to the predicted queue sizes through input links for each new cycle time. The proposed model can be easily translated into a control code for implementation in a real time control system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1493-1498
• /
• 2004

WSGGM with gray gas regrouping is successfully applied to study the flame structure of counter flow flames including effect of radiative transfer. The statistical narrow band model is used to obtain the benchmark solutions. Results obtained by using the optically thin model are shown to overestimate the emission and to predict the flame structures inadequately especially for optically thick and low stretch rate flames. Computed results by using the WSGGM with 10 gray gases and SNB model show reasonable agreements with each other, and the required calculation time for the WSGGM is acceptable for engineering applications.

• 산업기술연구
• /
• 제9권
• /
• pp.67-77
• /
• 1989

This study is concerned with the accuracy, the pattern of error with which subjects can interpolate the location of a pointer or a target between two graduation markers with various size on CRT display. Stimuli were graphic images on CRT with a linear, end-marked, ungraduated scales having a target for t base-line sizes. The location of a target is estimated in units over the range 1-99. Smallest error of estimates was at the near ends and middle of the base-line. The median error was less 2 units, modal error was 1, and most error(;99.6%) was within 10. Subjects had a more tendency to overestimate than to underestimate at the left-part of base-line in all siges, and an opposite tendency at the right-part. A proper size to minimize the interpolation error exists such that size 500. It is suggested that interpolation of fifths and even tenths will give a reguired accuracy for certain situations, and relative location and base-line size has a relevant attribute to interpolate.

• 한국분무공학회지
• /
• 제13권1호
• /
• pp.22-27
• /
• 2008

The false diffusion occurs generally when the flow is oblique to the grid lines and when there is a non-zero gradient of the dependent variable in the direction normal to the flow. This numerical problem can overestimate diffusion terms in the continuous phase, causing the numerical inaccuracy for the simulation of impinging sprays on inclined walls because most of spray calculation uses rectangular grid system. Therefore, the main objective of this article is to investigate numerically the influence of false diffusion on numerical simulation for spray-wall impingement on inclined walls. It is found that unlike the spray impingement normal to the wall, the numerical diffusion exists in the case when diesel sprays impinge on the inclined walls with different angles. The results show that the correction function should be considered for accurate prediction of spray penetration length and more elaborate numerical schemes should be utilized to reduce the false diffusion.

• Bulletin of the Korean Chemical Society
• /
• 제30권4호
• /
• pp.794-796
• /
• 2009

We have studied the structures and stabilities of Au6 to explore the origin of the large discrepancy between relative energies obtained from the density functional theory (DFT) and ab initio correlated levels of theory. The MP2 methods significantly overestimate the stability of the non-planar isomer when the double-$\zeta$ polarization quality of basis sets, such as LANL2DZ+1f and CEP31G+1f, are used. However, we show that such preference for the non-planar structure at the MP2 level mainly originates from the large basis set superposition error.

• Structural Engineering and Mechanics
• /
• 제5권6호
• /
• pp.785-801
• /
• 1997

Reinforced Concrete beams with tension and compression softening material constitutive laws are studied. Energy-based and non-local regularisation techniques are presented and applied to a R.C. element. The element characteristics (sectional tangent stiffness matrix, element tangent stiffness matrix restoring forces) are directly derived from their symbolic expressions through numerical integration. In this way the same spatial grid allows us to obtain a non-local strain estimate and also to sample the contributions to the element stiffness matrix. Three examples show the spurious behaviors due to the strain localization and the stabilization effects given by the regularisation techniques, both in the case of tension and compression softening. The possibility to overestimate the ultimate load level when the non-local strain measure is applied to a non softening material is shown.