• 제목/요약/키워드: Overburden pressure

검색결과 81건 처리시간 0.031초

상재하중의 영향을 고려한 불포화 풍화토의 함수특성 평가 (Evaluation of Overburden Pressure on Soil-Water Retention Characteristics of Unsaturated Weathered Soils)

  • 박재영;박성완
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
    • /
    • pp.111-118
    • /
    • 2008
  • The purpose of this paper was to investigate the overburden effect on soil-water characteristic curve and unsaturated permeability of unsaturated weathered soils. For this, unsaturated suction and permeability tests under various overburden stress were conducted respectively. Then, the coefficient of unsaturated permeability and moisture capacity of weathered soils were estimated and compared. All these results are presented in the paper.

  • PDF

상재하중과 점토함유량이 불포화 풍화토의 함수특성에 미치는 영향 (Effects of Overburden Pressure and Clay Content on Water Retention Characteristics of Unsaturated Weathered Soils)

  • 박성완;박재영;태두형;심영종
    • 대한토목학회논문집
    • /
    • 제30권1C호
    • /
    • pp.53-63
    • /
    • 2010
  • 함수특성곡선은 불포화지반의 거동을 분석하는데 있어서 매우 중요한 물성으로 활용되고 있으나 많은 경우 상재하중과 세립분의 영향을 고려하지 않은 상태에서 측정되어 적용해 왔다. 따라서 본 논문에서는 국내의 대표적인 풍화토를 대상으로 상재하중과 점토의 함유량에 따른 함수특성 영향을 살펴보았다. 상재하중, 세립분, 그리고 이력 조건을 고려하여 함수특성과 불포화 투수계수를 SWCC 시험결과를 토대로 평가하였다. 또한 불포화시 습윤용적과 확산능력에 대하여도 살펴보았다.

불포화 풍화계열 사면의 안정성에 미치는 상재응력의 영향 (Effects of Overburden Stress on Stability in Unsaturated Weathered Soil Slopes)

  • 박성완;박재영
    • 한국지반공학회논문집
    • /
    • 제25권10호
    • /
    • pp.55-65
    • /
    • 2009
  • 강우침투에 의한 사면의 표층파괴는 국내에서도 잘 알려져 있고 이러한 불포화 사면에서의 수리학적/역학적 거동은 매우 복잡하다. 불포화사면에 대한 해석 수행 시, 함수특성곡선은 매우 중요한 지반정수로 활용되고 있는데 풍화사면의 경우 층으로 구성되어 있고 상재하중을 받고 있어 함수특성곡선의 적용시 적절한 상재하중의 효과에 대한 고려가 필요하다. 이러한 상황을 반영하기 위하여 본 연구에서는 풍화토를 대상으로 다양한 조건의 상재하중하에서 함수특성곡선을 획득하였으며 이를 통하여 불포화전단강도를 추정하였다. 또한 상재하중의 영향을 고려하여 불포화풍화사면에 대한 안정성을 평가하였다. 해석 결과 상재하중에 대한 효과는 매우 중요하며 적절한 해석에서의 적용은 사면안정성 예측은 항상 시킬 수 있다고 판단된다.

상재하중과 체적변형을 고려한 불포화화강풍화토의 함수특성곡선 (The Influence of Overburden Pressure and Volume Change on the Soil-water Characteristic Curve of Unsaturated Weathered Granite Soil)

  • 이영휘;김태한;문석준
    • 한국지반환경공학회 논문집
    • /
    • 제11권5호
    • /
    • pp.53-60
    • /
    • 2010
  • 불포화토의 역학적 성질을 규명하기 위한 가장 기본적인 요소인 함수특성곡선을 연구하기 위하여 대구 팔공산 지역의 화강풍화토를 대상으로 함수특성곡선시험을 수행하였다. 기존의 함수특성곡선 실험은 상재하중과 체적변형의 고려없이 실시하였지만, 본실험은 두요소를 고려하기 위하여 기존의 실험장비인 압력판 추출기를 개량하여 함수특성곡선 실험을 실시하였다. 시험과정에 있어 상재하중은 0, 25, 50, 75, 100kPa을 가하였으며, 체적변형은 각 단계마다 측정하였다. 본 실험의 시료를 통한 함수특성곡선 실험 결과는 상재하중의 증가에 따라 동일한 모관흡수력에서 낮은 체적함수비를 가졌으며, 공기함입치는 증가하였다. 또한 전이영역 구간의 기울기는 감소하는 결과를 나타내었으며 이력현상은 줄어드는 결과를 보였다. 포화도는 상재하중의 증가에 따라 동일한 흡수력에서 큰 값을 나타내었으며 건조과정보다는 습윤과정이 큰 값을 나타내었다. 체적변화를 고려한 함수특성곡선은 미고려한 함수특성곡선보다 미세하게 큰 값을 나타낸다. 본 실험의 실측치와 Fredlund와 Xing(1994)의 이론식은 잘 부합하는 결과를 나타내었으며, 상수값 a, n, m값은 상재하중에 따라 기존의 연구결과와 비슷한 양상을 보였다.

응회암 풍화토의 동결특성에 관한 열역학적 연구-상재하중과 동결점 저하를 중심으로- (A Thermodynamic Study on Freezing Characteristics of Weathered Tuff Soil- Freezing Point Depression with the Variation of Overburden Pressure -)

  • 서상열
    • 한국지반공학회논문집
    • /
    • 제15권6호
    • /
    • pp.297-306
    • /
    • 1999
  • 본 연구에서는 우란바톨(Ulanbator)에서 북경(Beijing)사이의 지역에서 샘플링한 응회암 풍화토의 동상 특성을 규명하기 위해 상재하중 변화에 따른 동결점 저하를 중심으로 양단면 온도 일정$(상단 5^{\circ}C,\; 하단 5^{\circ}C)$의 동상실험 실시하였다. 본 실험을 통해, 빙편 성장에 따른 체적 팽창과 동결면으로의 수분이동을 확인하였다. 그리고 상재하중과 온도와의 관계식을 제안하였다. 상재하중이 증가함에 따라 동상속도는 비례적으로 감소하였고 빙편발생온도의 절대치는 증가하였다. 또한 동결부분의 함수비가 미동결 부분보다 크게, 특히 동결부분에서도 빙정에 가까울수록 함수비는 증가하였다.

  • PDF

Frost Heaving in Artificial Ground Freezing

  • 생뢰효박
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1994년도 연약지반처리위원회 봄 학술발표회 논문집 연약지반처리
    • /
    • pp.13-46
    • /
    • 1994
  • Artificial ground freezing methods have been applied to geotechnical construction projects for stabilizing earth materials and controlling water seepage into the ground. However, this can result in frost heaving and causes the same engineering problems as encountered with the natural freezing of soil. In natural freezing, the ground freezes from the surface downward. When artificial ground freezing is applied at a deep location, however, freezing is limited locally. The soil condition differs between them as follows: Natural freezing - unsaturated and without overburden pressure. Artificial freezing -- saturated and under overburden pressure. The authors investigated the practical application of artificial ground freezing and examined the frost behaviour of a saturated soil under overburden pressure. This paper presents the results obtained from experiments concerning frost heaving and discusses frost heaving at the freezing site.

  • PDF

강우조건을 고려한 불포화사면의 안정성 평가 (Evaluation of Rainfall Conditions on Slope Stability in Unsaturated Weathered Soils)

  • 권홍기;박성완
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 춘계 학술발표회
    • /
    • pp.599-606
    • /
    • 2010
  • It has been reported that many slope failures in unsaturated soils are mainly caused by downward infiltration due to rainfall. The rainfall characteristics could be an important factor, and more predictable slope failures can be achieved by considering more reasonable rainfall conditions. So, a need exists that these trends of infiltration in weathered soils, which is commonly found in Korea, are assessed by considering rainfall conditions based on phenomenological approach. In this paper, numerical analyses of unsaturated soil slope under rainfall conditions are presented based on the soil-water characteristic curve in the laboratory and huff method. Then the performance of unsaturated weathered soil slopes was evaluated under various conditions after applying the effect of overburden pressure on SWCCs and fines contents. The results demonstrated that the rainfall conditions using Huff method can be very effective and the proper application on analysis is very important to enhance the prediction on unsaturated slope stability.

  • PDF

베인에 작용하는 수평응력과 토크를 이용한 모래의 마찰각 측정 (Measurement of Friction Angle of Sand from Horizontal Stress and Torque Acting on Vane)

  • 박성식;김동락;이새벽
    • 대한토목학회논문집
    • /
    • 제38권1호
    • /
    • pp.63-71
    • /
    • 2018
  • 본 연구에서는 베인에 작용하는 수평응력과 토크를 측정한 다음 이를 이용하여 모래의 마찰각을 구하는 연구를 수행하였다. 건조한 낙동강모래를 원통형 셀에 느슨하거나 조밀한 상태로 성형한 다음 상부에서 공기압 실린더로 상재하중(overburden pressure)을 25, 50, 75 또는 100kPa 가하여 베인(직경 5cm, 높이 10cm) 회전 시 주변에 작용하는 수평응력과 토크를 실시간으로 측정하였다. 베인 회전에 따른 최대 토크값은 느슨한 모래는 3.5~9.5Nm, 조밀한 모래는 7.4-17.6Nm 사이로 상재하중이 증가할수록 최대 토크값도 증가하였다. 조밀한 정도에 관계없이 $14-20^{\circ}$ 회전 시 최대 토크값에 도달하였으며, 베인날과 토압계의 초기 위치에 따른 최대값의 차이는 나지 않았다. 상재하중에 따라 베인에 작용하는 초기 수평응력비($K_0$)는 평균 0.33-0.35 사이이며, 베인 회전에 따라 수평응력이 전반적으로 증가하다가 모래 입자가 교란되면서 다시 감소하는 경향을 보였다. 실시간으로 측정된 수평응력과 토크를 이용하여 계산된 마찰각은 상재하중이 증가함에 따라 감소하는 경향을 보였으며, 느슨한 모래는 직접전단시험 결과와 유사한 마찰각을 보였다. 하지만, 조밀한 모래의 마찰각은 다소 과대평가하는 경향을 보였다.

Numerical analysis and stability assessment of complex secondary toppling failures: A case study for the south pars special zone

  • Azarafza, Mohammad;Bonab, Masoud Hajialilue;Akgun, Haluk
    • Geomechanics and Engineering
    • /
    • 제27권5호
    • /
    • pp.481-495
    • /
    • 2021
  • This article assesses and estimates the progressive failure mechanism of complex pit-rest secondary toppling of slopes that are located within the vicinity of the Gas Flare Site of Refinery No. 4 in South Pars Special Zone (SPSZ), southwest Iran. The finite element numerical procedure based on the Shear Strength Reduction (SSR) technique has been employed for the stability analysis. In this regard, several step modelling stages that were conducted to evaluate the slope stability status revealed that the main instability was situated on the left-hand side (western) slope in the Flare Site. The toppling was related to the rock column-overburden system in relation to the overburden pressure on the rock columns which led to the progressive instability of the slope. This load transfer from the overburden has most probably led to the separation of the rock column and to its rotation downstream of the slope in the form of a complex pit-rest secondary toppling. According to the numerical modelling, it was determined that the Strength Reduction Factor (SRF) decreased substantially from 5.68 to less than 0.320 upon progressive failure. The estimated shear and normal stresses in the block columns ranged from 1.74 MPa to 8.46 MPa, and from 1.47 MPa to 16.8 MPa, respectively. In addition, the normal and shear displacements in the block columns ranged from 0.00609 m to 0.173 m and from 0.0109 m to 0.793 m, respectively.