• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.4
• /
• pp.266-274
• /
• 1999

Vertical CTDT measurement at one point near tidewater glacier of fjord-head in Marian Cove, a tributary embayment of Maxwell Bay, South Shetland Islands was performed for 24 hours during the austral summer (January 21-22, 1998) to present water-column properties and SPM (suspended particulate matter) dispersal pattern in subpolar glaciomarine setting. Marian Cove shows three distinct water layers: 1) cold, freshened, and highly turbid surface plume in the upper 2 m, 2) warm, saline, and relatively clean Maxwell Bay water between 15-35 m in water depth, and 3) cold and turbid mid plume between 40-65 m in water depth. The surface plume is composed of silt-sized clastie particles mixed with flocculated biogenic detritus, and appears to originate from either supraglacial discharge by meltwater streams along the coast or water fall of ice cliff. Freshened and turbid mid plume consists exclusively of silt-sized clastic particles, resulting from subglacial discharge beneath the tidewater glacier. The disappearance of the two turbid plumes during the earlier period of measurement seems to be largely due to the breakup of the plumes by upwelling caused by strong easterly wind (> 8 m $sec^{-1}$). Thus, wind coupling over tidal effects regionally plays a major role in dispersal pattern of SPM as well as water exchange in Marian Cove.

• Research in Plant Disease
• /
• v.16 no.1
• /
• pp.21-26
• /
• 2010

Viral diseases, especially Barley yellow mosaic virus (BaYMV) and Barley mild mosaic virus (BaMMV) have been most serious in barley fields. In this study, we investigated the effect of different level of resistance to viral diseases on the plant growth and yield in malting barley. In diagnosis of virus infection, BaYMV and BaMMV were detected in 'Doosan 29' (susceptible), however, 'Jinyangbori' (moderate susceptible) and 'Hopumbori' (moderate) was infected by only BaYMV. Plant height was restrained about 8~29% in overwintered plant regeneration stage depending on the resistant of each cultivar. The culm length damaged also to 9~12% by BaYMV infection. The tiller numbers reduced to 10~14% in overwintering season, however, the head numbers in harvest season more decreased to 26~33%. Heading date was delayed to 3~3 days by the infection. In examination of yield components, 1,000 kernel weight and $\ell$ weight reduced according to culrivar's resistant degrees to 4.0~6.4% and 1.0~4.2%, respectively. The yield of abortive grain was doubled in BaYMV infection comparing to non-infested field. Three varieties tested in the non-infected field over two years were not significantly different for yield potential with ranges of 509kg~632kg/10a. However, significant yield reduction was observed in 'Saessalbori' and 'Baegdong' with ranges of 77~177kg/10a as compared to 'Hopumbori' (467 kg/10a) when tested in the virus-infected field. Yield potentials of these cultivars reduced by 26~43%, respectively, in the virus-infected field as compared to those in the non-infected field.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.284-295
• /
• 1999

The purpose of this study was to measure and analyze the bond strength of bonded amalgam using dental adhesives and to compare this with light-curing composite resin. Sections 8mm in diameter were punched out from the labial surface of bovine anterior teeth. These were embedded in clear acrylic resin blocks with labial surface facing out. 55 specimens were made for enamel and dentin each. After dividing these into 5 groups, group 1: Superbond C&B, group 2: Panavia 21, group 3: All-Bond 2, group 4: Fuji I Glass Ionomer Luting Cement, group 5: Scotchbond Multi-Purpose(Restorative Z-100), molds with holes of 6.3mm in diameter and 1.5mm in depth were placed over the specimens. The exposed tooth surfaces were treated with adhesives and the molds were filled with amalgam. In group 5, the mold was filled with composite resin and light-cured for 40 seconds. The author measured all specimens for bond strength 24 hours after amalgam filing and analyzed fracture surfaces. The following results were obtained: 1. Among the dentin groups, groups 1, 2 and 4 showed significantly lower bond strength compared with group 5(P<0.05). 2. Among the enamel groups, group 4 showed significantly lower bond strength compared with group 5(P<0.05). 3. In group 2, 2D showed significantly lower bond strength compared with group 2E(P<0.05). Other adhesives showed no such differences in bond strength between dentin and enamel(P>0.05). 4. Cohesive failure was observed in groups 1E and 5D, while mixed failure was seen in groups 1 and 5. Only adhesive failures were noted in groups 2, 3, 4.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.4
• /
• pp.545-552
• /
• 1998

This study was undertaken to clarify the effects of electrical stimulation on the biochemical properties of plaice sarcoplasmic reticulum and myofibrils at early period of death. The plaices were electrically stimulated (110V/60 Hz) In sea water bath for 15, 35, and 60 seconds, and killed instantly by spiking at the head. Killed samples were investigated for the changes in $Ca^{2+}$-ATPase activity of FSR (fragmented sarcoplasmic reticulum), LSR (light SR), HSR (heavy SR), and SDS-PAGE pattern of FSR. $Ca^{2+}$-ATPase activity of FSR increased until $45^{\circ}C$ and inactivated over $50^{\circ}C$. $Ca^{2+}$-ATPase activity of FSR remarkably decreased according to the duration of electrical stimulation. Myofibrillar $Mg^{2+}$-ATPase activity of electrically stimulated plaices in the presence of $Ca^{2+}$ was higher than that of sample instantly killed by spiking. $Mg^{2+}$-ATPase activity of myofibrils increased by electrical stimulation and the activity decreased during storage at $5^{\circ}C$. Myofibrillar $Mg^{2+}$-ATPase activity in sample killed by spiking was not affected by $Ca^{2+}$ ion. Myofibrillar $Mg^{2+}$-ATPase activity of electrically stimulated sample in the absen-re of $Ca^{2+}$ decreased during storage at $5^{\circ}C$, whit $Mg^{2+}$-ATPase activity in unstimulated sample did not show any change. $Ca^{2+}$-sensitivity of myofibrils showed no differences between electrically stimulated sample and sample killed by spiking, and the was no change during at $5^{\circ}C$.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.363-370
• /
• 2018

The succulent plants of Echeveria genus are in increasing demand worldwide, but it is difficult to supply good quality young plants throughout the year because propagation efficiencies are depend on cultivar and environmental factors. This study was carried out to investigate the propagation efficiencies of leaf cutting in Echeveria cultivars at different LED light qualities in a closed-type plant factory system. Leaf cuttings cut from stock plants of six difficult-to-propagated cultivars 'Afterglow (AG)', 'Berkeley Light (BL)', 'Mason (MS)', 'Subsessilis Light (SL)', 'Cream Tea (CT)', and 'Ben Badis (BB)' were put into cutting media in the plant factory system maintained at a temperature of $24{\pm}2^{\circ}C$ and relative humidity of $60{\pm}10%$, and watered with over-head irrigation twice a week. Cuttings were irradiated with sole or mixed red (R, 660 nm), blue (B, 450 nm), green (G, 530 nm), and far-red (FR, 730 nm) LEDs as follows: R10, R8+B2, R5+B5, R7+B2+FR1, and R7+B2+G1. PPFD just above the cuttings was $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and photoperiod was 16/8 (light/dark) hours. As a result, propagation efficiencies were dependent on cultivar. Rooting and shooting were relatively easy in 'SL' but shoot formation in 'AG' was very difficult. Light qualities from LEDs also affected plant regeneration. Light conditions with a higher ratio of B, R5+B5, R7+B2+FR1, and R7+B2+G1, promoted shoot formation and growth but inhibited rooting and root growth. R10 and R8+B2 with a higher ratio of R promoted rooting and root growth and inhibited shoot formation and growth of cuttings. In addition, the treatment with FR increased leaf size and biomass of the all plants. Therefore, further studies are needed to investigate the optimum compositions of LED light quality for the improvement of leaf cutting efficiency in difficultto-propagated Echeveria cultivars.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.4
• /
• pp.254-261
• /
• 2014

This study was to assess the effect of sowing mixed legume forage and applying cattle manure on the productivity and feed value of whole-crop barley (WCB) as a representative of winter crops and to estimate feeding capacity of Korean native cattle (Hanwoo) per unit area by defining optimal application level of cattle manure for more fertile soil and manure recycling for the purpose of reduced environmental pollution and efficient production of organic forage contributable to production of organic animal products. Sowing mixed legume forage significantly (p<0.05) increased yields of dry matter (DM), crude protein (CP) and total digestible nutrients (TDN) for WCB compared to WCB alone sowing, but there was no difference between mixed sowing treatments. The yields of DM, CP and TDN were significantly (p<0.05) highest in 100~150 kg N/hg. The CP and acid detergent fiber (ADF) contents were highest in mixed sowing with hairy vetch, followed by sowing mixed forage pea and WCB alone (p<0.05). There were no differences in CP and neutral detergent fiber (NDF) contents among cattle manure application levels. As nitrogen application level increased, ADF content increased (p<0.05), but TDN content decreased (p<0.05). Feeding capacity of organic Hanwoo (head/ha) weighing 450 kg of body weight with 400 g of daily gain significantly (p<0.05) increased due to mixed sowing with legume forage, and with increasing application levels of fermented cattle manure, feeding capacity significantly (p<0.05) increased. The results indicate that mixed-sowing of WCB and legume forage not only cut nitrogen application level of fermented cattle manure by over 50 kg per ha but also increased their feed value and productivity, and feeding capacity. This would be contributable to diversity of forage resources as well as production of organic animal product by creating low cost and high quality of forage.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.2
• /
• pp.191-197
• /
• 2019

Although auto-adjusting positive airway pressure (APAP) titration at home has several advantages over a CPAP titration in terms of convenience and time saving, there are still concerns as to whether it will show corresponding accuracy when compared to laboratory-based polysomnography (PSG) and CPAP titration. To obtain more evidence supporting home-based auto-titration, APAP titration was performed at home for patients who were presented with OSA on laboratory-based diagnostic PSG followed by CPAP titration. A total of 79 patients were included in the study. They all underwent split-night PSG with CPAP titration, and APAP titration for more than 7 days. The patients with successful titration at both situations were selected. The optimal pressure and apnea-hypopnea index (AHI) of CPAP and APAP titration were compared. The optimal pressure for CPAP and APAP titration were $7.0{\pm}1.8cmH_2O$ and $7.6{\pm}1.6cmH_2O$ (P<0.001), whereas the corresponding AHI were $1.3{\pm}1.5/h$ and $3.0{\pm}1.7/h$ (P<0.001). As a result, the achievement rates of optimal pressure for CPAP and APAP titration were 96.2% and 94.9% (r=-0.045, P=0.688), respectively. The results of this study did not differ with regard to the optimal pressure between CPAP and APAP titration. Overall, CPAP and APAP titrations should be chosen depending on a required situation.

• Korean Journal of Organic Agriculture
• /
• v.23 no.2
• /
• pp.359-372
• /
• 2015

This study was to assess the effects of sowing mixed legume forage and applying fermented cattle manure on the productivity and feed value of whole crop wheat (WCW) as a representative of winter crops and also to estimate feeding capacity of Korean native cattle (Hanwoo) per unit area by defining optimal application levels of cattle manure for more fertile soil and manure recycling for the purpose of reduced environmental pollution and efficient production of organic forage contributable to production of organic animal products. Sowing mixed legume forage significantly (p<0.05) increased yields of dry matter (DM), crude protein (CP) and total digestible nutrients (TDN) for WCW compared to WCW alone sowing, but there were no differences between mixed sowing treatments. The yields of DM, CP and TDN were significantly (p<0.05) higher in 100~150 kg N/ha. The CP and acid detergent fiber (ADF) contents were highest in mixed sowing with hairy vetch, followed by sowing mixed forage pea and WCW alone (p<0.05). There were no differences in CP among cattle manure application levels. As nitrogen application level increased, ADF content increased (p<0.05), but TDN content decreased (p<0.05). Feeding capacity of organic Hanwoo (head/ha) weighing 450 kg of body weight with 400 g of daily gain significantly (p<0.05) increased due to mixed sowing with legume forage, and with increasing application levels of fermented cattle manure, feeding capacity significantly (p<0.05) increased. The results indicated that mixed-sowing of WCW and legume forage not only reduced nitrogen application level of fermented cattle manure by over 50 kg per ha but also increased their feed value and productivity, and feeding capacity. This would be contributable to diversity of forage resources as well as production of organic animal product by creating low cost and high quality of forage.