• 한국결정성장학회지
• /
• 제31권6호
• /
• pp.240-246
• /
• 2021

도자 생산현장에서 아연결정유약을 제조하여 사용할 때 조성원료에 따라 유약의 결정생성이 불안정하고, 특히 결정이 잘 생성되는 유약도 습식제조 후 시간이 경과하면 결정생성이 급격히 저하되는 문제점이 있다. 도예가들이 주로 사용하는 산화아연(ZnO)과 하소아연(calcined ZnO), 프리트 3110, 그리고 규석을 출발 물질로 3성분계 실험을 통하여 아연결정 조성을 선택하고 선 연구된 소성 조건을 사용하였다. 유약을 제조하고 1일~24주까지 습식으로 보관하면서 침수 과정에서 아연이 아연결정유의 결정생성에 미치는 영향을 규명하고자 하였다. 원료 입도 및 침수 영향을 측정하기 위해 입도분석, XRD, Raman Spectroscopy 그리고 SEM 분석 등을 하였다. 연구결과, 산화아연은 습식으로 유약 사용 시 willemite 결정 생성 및 성장이 우수하지만 유약을 보관하는 동안 ZnO가 물과 반응하여 Zn(OH)2를 생성하고 응집되면서 유약내 ZnO량이 감소되어 willemite 생성을 저해하여 결정이 감소됨을 확인하였다.

• 한국항만학회지
• /
• 제3권1호
• /
• pp.35-55
• /
• 1989

Today, about 99% of total import and export cargo in Korea is being transported through the port. The general trends of cargo handling show increases in capacity and speed, In order to cope with these trends, it is not only required to raise the efficiencies of port operation and function but also necessary to decide the optimal amount of the skilled labor force for cargo handling in the port. Cargo handling in the port is basically relied on the cargo handling facilities. Therefore, it is very important to reserve the amount of labor force for cargo handling system has been developed up to a certain level but the personnel management system which is the superior structure has not been followed well. In this study, therefore, we show a method to determine the required amount of labor force for cargo handling considering the amount of cargo and type of cargo handling work per each cargo, and the optimal amount labor force in cope with the fluctuation of the basic cargo handling labor force with respect to the time of in and out cargo flow in the viewpoint of minimizing the expences due to reservation of extra labor force than needed and firing employment of labor force using the Dynamic Programming. The derived algorithm is introduced into the computer simulation for Pusan port with the analyzed real data such as amount of cargo handling in the port with respect to working hour, cargo capacity, working step, the ratio of cargo handling facility and actual number of workers and we estimated the required labor force. As a result of analysis the labor force of Pusan port showed the over-employment such as maximum 21.4%, minimum 8.2% when we assumed that the averages of actual working hours and days were 8 hours in a day and 20 day in a month.

• 한국초전도ㆍ저온공학회논문지
• /
• 제6권1호
• /
• pp.12-17
• /
• 2004

High critical current density. $J_c$ over $1MA/cm^2$ at 77 K in a self field was successfully achieved from the YBCO film prepared on (100) $SrTiO_3$ single-crystal substrates by the TFA-MOD process. Unlike a normal TFA-MOD process, we prepared the TFA precursor solution by dissolving YBCO powder into the trifluoroacetic acid. A significant amount of the second phases, including $BaF_2$, was observed in the films fired at $700-725^{\circ}C$ for 2 h under $P(O_2)=10^{-3}$ atm and $P(H_2O)=4.2%$, most probably due to an insufficient reaction time, and hence $T_c$ was greatly degraded. However the films fired at $750-800^{\circ}C$ for 2 h were composed of strongly c-axis oriented YBCO grams without any second phases. and exhibited the $T_c$ values of 89.5 ~ 91 K with a sharp transition. With increasing the firing temperature from 750 to $800^{\circ}C$ average grain size of YBCO was increased and grain connectivity was enhanced. The highest $J_c$ value of $1.1MA/cm^2$ was obtained from the YBCO film fired at $800^{\circ}C$.

• 한국전기전자재료학회논문지
• /
• 제22권5호
• /
• pp.397-404
• /
• 2009

Effects of ceramic filler types and dose on the low temperature sintering and dielectric properties of ceramic/$CaO-Al_2O_3-SiO_2$ (CAS) glass composites were investigated. All of the specimens were sintered at $850{\sim}900^{\circ}C$ for 2 h, which conditions are required by the low-temperature co-firing ceramic (LTCC) technology. Ceramic fillers of $CaCO_3$, $Al_2O_3$, $CaCO_3-Al_2O_3$ mixture, and $CaCO_3-Al_2O_3$ compound ($CaAl_2O_4$), respectively, were used. The addition of $Al_2O_3$ yielded the crystalline phase of alumina, which was associated with the inhibition of sintering, while, $CaCO_3$ resulted in no apparent crystalline phase but the swelling was significant. The additions of $CaCO_3-Al_2O_3$ mixture and $CaAl_2O_4$, respectively, yielded the crystalline phases of alumina and anorthite, and the sintering properties of both composites increased with the increase of filler addition and the sintering temperature. In addition, the $CaAl_2O_4$/CAS glass composite, sintered at $900^{\circ}C$, demonstrated good microwave dielectric properties. In overall, all the investigated fillers of 10 wt% addition, except $CaCO_3$, yielded reasonable sintering (relative density, over 93 %) and low dielectric constant (less than 5.5), demonstrating the feasibility of the investigated composites for the application of the LTCC substrate materials.

• 보존과학회지
• /
• 제27권4호
• /
• pp.403-414
• /
• 2011

본 연구는 2007년 국립중앙박물관 소장유물인 고려시대 화금청자 2점과 중국 북송시기 화금도자 3점의 금 잔존여부 및 금채의 채색기법 연구를 바탕으로 고려시대 금채장식을 재현 실험하였다. 도자기 시편 위에 4개의 교착제와 금분을 섞어 금채 후 $100^{\circ}C{\sim}1200^{\circ}C$까지 단계별 번조하여 표면의 교착상태와 발색력을 현미경과 색도를 관찰하였다. 이를 통해 각 교착제에 따른 시각적 효과와 적정온도를 파악하였고, 그 중 기름과 아교가 가장 뛰어난 교착력과 발색력을 보이는 것을 알 수 있었다. 이에 따라 완형의 현대 재현 고려 상감청자의 유약 표면에 기름과 아교를 각각 금채한 후 적정온도인 $700^{\circ}C{\sim}800^{\circ}C$에서 번조하였으며, 두 교착제가 유약 위에 교착된 상태를 파악하기 위해 금채의 단면을 SEM으로 관찰하였다. 그 결과, 교착력은 차이가 없었으나, 발색력, 밀도 등은 아교가 다소 떨어지는 차이가 있었다. 또한 기름은 실온에서 건조되지 않는 반면, 아교는 건조되는 장점으로 작업성이 좋은 편이었다. 이에 반해, 아교는 작업성 측면에서는 기름에 비해 매우 뛰어난 장점을 보였으나 발색력에서는 기름에 비해 다소 떨어지는 것을 이번 실험을 통해 알 수 있었다.

• 헤리티지:역사와 과학
• /
• 제50권4호
• /
• pp.20-37
• /
• 2017

북제시기 유도 중에는 흰색 혹은 옅은 황색 유약 바탕에 녹색, 갈색, 황색 등으로 채색한 것이 있는데, 이는 "채회유도(彩繪釉陶)"로 통칭된다. 1971년 하남성(河南省) 안양시(安陽市) 홍하둔촌(洪河屯村)에 소재한 범수묘(範粹墓)에서 백유녹채삼계관(白釉綠彩三系罐)과 백유녹채장경병(白釉綠彩長頸甁)이 출토되었으나, 연구자들의 주목을 받지 못한 채 공반 출토된 백유기(白釉器)만이 중국에서 기년 자료가 확실한 가장 이른 백자의 증거로 제시되어 끊임없는 논쟁이 이루어졌다. 필자는 이 채회유도에 주목하여, 지금까지 무덤과 가마터에서 발견된 자료들을 정리하였으며, 이를 바탕으로 장식특징과 제작 기술을 파악하였다. 또한 이들이 부장된 무덤의 연대를 통한 출현 상한시점 및 피장자의 신분을 특정하여 채회유도의 사회적 가치를 알아보았다. 북제시기 채회유도는 이전 시기와 구별되는 제작특징이 확인되었는데, 구체적으로는 자토(瓷土)를 이용한 태토, 2차 소성, 유상회채(釉上繪彩) 기법이 새로 채용되었다. 이러한 특징은 이미 북위(北魏) 시기 유도에서 일부 나타난 변화로, 이것이 북제까지 이어져 백유 채회유도의 출현으로 나타났다고 볼 수 있다. 또한 채회유도의 기형은 동시기 남방지역 자기 기형과 북위시기 이래 생산된 채회의 속성이 결합되어 형성되었음을 확인하였다.

• The Korean Journal of Physiology
• /
• 제18권1호
• /
• pp.19-35
• /
• 1984

Since the first report of Drury and $Szent-Gy{\ddot{o}}rgyi$ in 1929, the inhibitory influences of adenosine on the heart have repeatedly been described by many investigators. These studies have shown that adenosine and adenine nucleotides have overall depressant effects, similar to those of acetylcholine. Heart beats become slow and weak. It is also well known that adenosine is a potent endogenous coronary vasodilator. Many investigations on the working mechanisms of adenosine have been focused mainly on the effects of the coronary blood flow. However, the cellular mechanisms underlying the inhibitory action of adenosine on sinus node are not well understood yet. Thus, this study was undertaken to examine the behavior of rabbit SA node under influence of adenosine. In these series of experiments three kinds of preparations were used: whole atrial pair, left atrial strip, and isolated SA node preparations. The electrical activity of SA node was recorded with conventional glass microelectrodes 30 to 50 $M{\Omega}$. The preparations were superfused with bicarbonate-buffered Tyrode solution of pH 7.35 and aerated with a gas mixture of $3%\;CO_2-97%\;O_2$ at $35^{\circ}C$. In whole atrial pair, adenosine suppressed sinoatrial rhythm in a dose-dependent manner. Effect of adenosine on atrial rate appeared at the concentration of $10^{-5}M$ and was enhanced in parallel with the increase in adenosine concentration. Inhibitory action of adenosine on pacemaker activity was more prominent in the preparation pretreated with norepinephrine, which can steepen the slope of pacemaker potential by increasing permeability of $Ca^{+2}$. Calcium ions in perfusate slowly produced a marked change in sinoatrial rhythm. Elevation of the calcium concentration from 0.3 to 8 mM increased the atrial rate from 132 to 174 beats/min, but over 10 mM $Ca^{+2}$ decreased. The inhibitory effect of adenosine on sinoatrial rhythm developed very rapidly. Atrial rate was recovered promptly from the adenosine-induced suppression by the addition of norepinephrine, but extra $Ca^{+2}$ was less suitable to restore the suppression of atrial rate. Adenosine suppressed also atrial contractility in the same dosage range that restricted pacemaker activity, even in the reserpinized preparation. In isolated SA node preparation, spontaneous firing rate of SA node at $35^{\circ}C$(mean{\pm}SEM, n=16) was $154{\pm}3.3\;beats/min. The parameters of action potentials were: maximum diastolic potential(MDP), $-73{\pm}1.7\;mV: overshoot(OS), $9{\pm}1.4\;mV: slope of pacemaker potential(SPP), $94{\pm}3.0\;mV/sec. Adenosine suppressed the firing rate of SA node in a dose-dependent manner. This inhibitory effect appeared at the concentration of $10^{-6}M$ and was in parallel with the increase in adenosine concentration. Changes in action potential by adenosine were dose-dependent increase of MDP and decrease of SPP until $10^{-4}M$. Above this concentration, however, the amplitude of action potential decreased markedly due to the simultaneous decrease of both MDP and OS. All these effects of adenosine were not affected by pretreatment of atropine and propranolol. Lowering extra $Ca^{2+}$ irom 2 mM to 0.3 mM resulted in a marked decrease of OS and SPP, but almost no change of MDP. However, increase of perfusate $Ca^{2+}$ from 2 mM to 6 or 8 mM produced a prominent decrease of MDP and a slight increase of OS and SPP. Dipyridamole(DPM), which is known to block the adenosine transport across the cell membrane, definately potentiated the action of adenosine. The results of this experiment suggest that adenosine suppressed pacemaker activity and atrial contractility simultaneously and directly, by decreasing $Ca^{2+}-permeability$ of nodal and atrial cell membranes.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.176-176
• /
• 2009

Influences of dose and particle size of $Al_2O_3$ filler and sintering time on the dielectric properties of $Al_2O_3$ filler/CaO-$Al_2O_3-SiO_2$ (CAS) glass composites were investigated with a view to applying the composites to the substrate material in low temperature co-firing ceramic (LTCC) technology. The increased addition of $Al_2O_3$ filler with the particle size of 1 ${\mu}m$ monotonically decreased the density of the sintered specimen at a given temperature, while sintering of the 10 wt% $Al_2O_3$ added specimen at $925^{\circ}C$ for 2 h demonstrated 96.0 % of the relative density, dielectric constant of 6.34, and quality factor of 2,760 GHz. As for the influence of the particle size of the $Al_2O_3$ filler, there existed an optimum particle size (30 ${\mu}m$) to ensure successful densification (96.5 %) of the 10 wt% $Al_2O_3$/CAS composites at $925^{\circ}C$ for 2 h, at which condition the specimen demonstrated dielectric constant of 5.45 and quality factor of 3,740 GHz. When the influence of the sintering time of the 10 wt% $Al_2O_3$) (30 ${\mu}m$) added specimen was investigated at the sintering temperature of $925^{\circ}C$, an overly long sintering time degraded dielectric properties due to the over-sintering and the significant growth of the second phase such as anorthite, while the sintering for 4 h demonstrated 96.58 % of the relative density, dielectric constant of 5.4, and quality factor of 4,050 GHz. These results demonstrate the feasibility of the investigated material as the substrate material in LTCC technology.

• Journal of Korean Neurosurgical Society
• /
• 제30권1호
• /
• pp.41-46
• /
• 2001

Objective : The exact position of the lesion during the pallidotomy is critical to obtain the clinical improvement of parkinson's disease without damage to surrounding structure. Ventriculogrphy, CT(computed tomograpy) or MRI(magnetic resonance imaging) have been used to determine the initial coordinates of stereotactic target for pallidotomy. The goal of this study was to determine whether microelectrode recording significantly improves the neurophysiologic localization of the target obtained from MRI. Methods : Twenty patients were studied. They underwent a unilateral pallidotomy. Leksell frame was applied and T1 axial images parallel to the AC-PC(anterior commissure-posterior commissure) plane using a 1.5 Tesla MRI with 3mm slice thickness were obtained. Anteroposterior coordinate of target was chosen at 2mm in front of the midcommissural point and lateral coordinate between 19 and 22mm from the midline. The vertical coordinate was calculated on coronal slice using a fast spin echo inversion recovery sequence(FSEIR) related to the position of the choroidal fissure and ranged over 4-5mm below the AC-PC plane. Confirmation of the anatomical target was done on axial slices using the same FSEIR sequence . Microrecording was done at the pallidum contralateral to the symptomatic side using an electrode with a tip diameter of $1{{\mu}m}$ diameter tip and 1.1-1.4 mOhm impedance at 1000Hz. Electrophysiologic localization of the target was also confirmed intraoperatively by macrostimulation. Results : Microrecording techniques were reliable to define the transition from the base of the pallidum which was characterized by the disappearance of spike activity and by the change of the audible background activity. Signals from high amplitude neurons firing at 200-400Hz were recorded in the pallidal base. X, Y and Z coordinates of target obtained from the MRI were within 1mm from the X, Y, Z coordinates obtained with microrecording in 16 patients (80%), 15 patients(75%), 10 patients(50%) respectively. The difference of Y coordinate between on MRI and on microrecording was 4mm in only one patient. Conclusion : The MRI was accurate to localize the target within 1mm of the error from microrecording target in 70% of the patients. 4mm discrepancy was observed only once. We conclude that MRI alone can be used to determine the target for pallidotomy in most patients. However, microrecording technique can still be extremely valuable in patents with aberrant anatomy or unusual MRI coordinates. We also consider physiologic confirmation of the target using macrostimulation to be mandatory in all cases.

• 자원리싸이클링
• /
• 제21권6호
• /
• pp.12-22
• /
• 2012

본 연구는 제강용도로 사용하기 위해 돌로마이트를 하소후 남은 2 mm 이하의 경소백운석 부산물을 건축용 바닥 몰탈의 기존 팽창재로서 활용 가능성을 검토하고자 하였다. 경소백운석은 $600{\sim}800^{\circ}C$ 정도에서 하소하였을 때 반응성이 높은 준결정상태의 활성 마그네시아로 존재하게 되며, 이 활성화된 마그네시아는 수화초기 Brucite gel을 형성하여 수화물 비율을 상대적으로 줄여 치밀한 조직을 형성하는 원인으로 작용하고, 수화후기에는 결정질의 Brucite가 형성되어 수축 현상을 억제하며 부피가 2배 이상 팽창하여 화학적 수축균열 방지 역할을 하게 되는 것이다. 실험결과 경소백운석은 기존 사용 중인 팽창재 대비 동일량 적용시 압축강도는 우수하게 확인되었으나, 반응성은 기존 팽창재(생석회+무수석고)에 비해 다소 낮게 측정되었다. 하지만 팽창재로서의 역할은 충분한 것으로 확인되었으며, 공사기간 단축 등 부가적인 효과를 나타내었다.