• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2020년도 전력전자학술대회
• /
• pp.215-217
• /
• 2020

본 논문은 배터리 팩 내부 셀 파라미터의 불균일도에 대한 분석을 실시하고 이를 기반으로 과방전을 사전에 진단할 수 있는 방법을 제안한다. 이를 위해서 배터리 팩 내부 셀간 편차가 발생하는 셀을 선정하여 두 셀간 특성 분석을 실시하였으며, 이를 기준으로 예측 모델을 구성하였다. 예측 성능을 통해 배터리 전압 예측 성능에 영향을 미치는 인자를 분석하였으며, 배터리 전기적 등가회로 모델을 기반으로 예측 모델을 제안한다. 예측 모델은 실제 과방전이 발생한 셀을 기준으로 실험데이터와 비교하여 예측 성능을 검증하였다.

• 한국생산제조학회지
• /
• 제22권3호
• /
• pp.465-471
• /
• 2013

Flow rate control is the uppermost concern for a trochoid hydraulic pump. Cavitation within the flow field of the pump has the greatest effect on the flow control during high-speed pump rotation of approximately 3500~4000 RPM. In this paper, based on AMESim$^{(R)}$ and Solid Works$^{(R)}$, we will present a method to simulate cavitation by analyzing the control factors of a trochoid pump, including the hydraulic pressure change at the outlet, flow rate based on the rotation speed of the inner rotor, leakage through the gap between the outer and inner rotors, and discharging angle of the outlet. The proposed methodology of the [cavitation simulation will enable field engineers to more easily design trochoid pumps, and will allow more concrete control over the flow rate of the pump by realizing an analysis model similar to the actual product model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1025_1026
• /
• 2009

This paper introduces the test a rapid pulsed power charging system for pulsed power application. The charger is designed based on three-phase series resonant inverter followed by air cooled step-up transformers. It has many advantages of lower weight, small size and high efficiency compared with large bulky traditional pulse power charging system. To apply 150kJ pulsed power system, detail test was carried out at various condition and its results shows 90% efficiency at full load condition. And additional experiments such as short, open, and self discharging during charging status are performed to verify reliable operation at abnormal condition and it was confirmed that developed capacitor charger showed very reliable operation all over the tests.

• 한국분말재료학회지
• /
• 제22권5호
• /
• pp.331-336
• /
• 2015

We report on the succesful fabrication of ZnO nanorod (NR)-based robust piezoelectric nanogenerators (PNGs) by using Cu foil substrate. The ZnO NRs are successfully grown on the Cu foil substrate by using all solution based method, a two step hydrothermal synthesis. The ZnO NRs are grown along c-axis well with an average diameter of 75~80 nm and length of $1{\sim}1.5{\mu}m$. The ZnO NRs showed abnormal photoluminescence specrta which is attributed from surface plasmon resonance assistant enhancement at specific wavelength. The PNGs on the SUS substrates show typical piezoelectric output performance which showing a frequency dependent voltage enhancement and polarity dependent charging and discharging characteristics. The output voltage range is 0.79~2.28 V with variation of input strain frequency of 1.8~3.9 Hz. The PNG on Cu foil shows reliable output performance even at the operation over 200 times without showing degradation of output voltage. The current output from the PNG is $0.7{\mu}A/cm^2$ which is a typical out-put range from the ZnO NR-based PNGs. These performance enhancement is attributed from the high flexibility, high electrical conductivity and excellent heat dissipation properties of the Cu foil as a substrate.

• 전력전자학회논문지
• /
• 제23권3호
• /
• pp.161-167
• /
• 2018

In battery-operated systems, an isolated converter is used to interface the utility grid with the system to increase stability when charging and discharging batteries. Systems such as vehicle-to-grids (V2Gs), on-board chargers, and energy storage systems (ESSs) have recently become popular, and the roles of isolated converters have become important considerations in fabricating such devices. A fixed-frequency LLC converter, which is a type of isolated converter, presents the advantages of high efficiency and high power density by performing zero-voltage switching (ZVS) over wide frequency ranges. However, the magnetizing inductance of the LLC converter should be designed to enable ZVS in all switching devices. Therefore, in this study, the operating characteristics of the LLC circuit are analyzed, and an optimal design method for ZVS operation is established. Moreover, an 8 kW LLC high-efficiency and high-power-density resonant converter is designed and tested for ESS application. The LLC converter achieves 98% efficiency at rated power.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권6호
• /
• pp.601-607
• /
• 2015

A set of novel silicon controlled rectifier (SCR) devices' characteristics have been analyzed and verified under the electrostatic discharge (ESD) stress. A ring-shaped diffusion was added to their anode or cathode in order to improve the holding voltage (Vh) of SCR structure by creating new current discharging path and decreasing the emitter injection efficiency (${\gamma}$) of parasitic Bipolar Junction Transistor (BJT). ESD current density distribution imitated by 2-dimensional (2D) TCAD simulation demonstrated that an additional current path exists in the proposed SCR. All the related devices were investigated and characterized based on transmission line pulse (TLP) test system in a standard $0.5-{\mu}m$ 24 V CDMOS process. The proposed SCR devices with ring-shaped anode (RASCR) and ring-shaped cathode (RCSCR) own higher Vh than that of Simple SCR (S_SCR). Especially, the Vh of RCSCR has been raised above 33 V. What's more, their holding current is kept over 800 mA, which makes it possible to design power clamp with SCR structure for on chip ESD protection and keep the protected chip away from latch-up risk.

• 생태와환경
• /
• 제50권3호
• /
• pp.325-336
• /
• 2017

The ecosystem in the Gwangju Stream has taken a wide range of disturbance such as the discharging water of sewage treatment plant, the lake water and the river water from different water system over the past decade. This study was figured out some significant influence factors by analyzing the relationship between biotic and abiotic factors in the urban stream. Abiotic components included 15 water quality variables which were measured in five sampling sites along the stream from October 2014 to July 2015, whereas the benthic macroinvertebrates found in those sites were used to estimate various biotic indices representing the ecological status of the community. The results of correlation analyses indicated that abiotic factors by human activities affected on the inhabitation of benthic macroinvertebrates more than biotic factors. The results of cluster analyses and ANOVA tests also showed that biotic and abiotic characteristics were clearly different in season. The main influence factors of cluster analysis by sites were $NH_3-N$, EPT(I) and DO. It was considered that more various statistical analyses would be necessary to find some different relationships and influence factors between biotic and abiotic variables in the urban stream.

• 전기학회논문지
• /
• 제64권4호
• /
• pp.616-622
• /
• 2015

A microgrid which is composed of distributed generation systems, energy storage systems and loads is operated in the grid-connected mode and in the islanded mode. Especially, in the islanded mode, a microgrid should maintain frequency in the allowed range. The frequency is decided by a balance between power supply and power demand. In general, the frequency is controlled by using battery energy storage systems (BESSs) in the microgrid. Especially, droop control is applied to controlling BESSs in the microgrid. Meanwhile, over-charging and deep-discharging of BESS in operation and control cause life-shortening of batteries. In this paper, a fuzzy droop control is proposed to change droop gains adaptively by considering state of charge (SOC) of BESSs to improve the life cycle of the battery. The proposed fuzzy droop control adjusts droop gains based on SOC of BESSs in real time. In other to show the performance of the proposed fuzzy droop control, simulation based on Matlab/Simulink is performed. In addition, comparison of the convention droop control and the proposed fuzzy droop control is also performed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2772-2774
• /
• 2000

According to the development of marine transportation business and the modernization and over sizing of vessel transportation equipment. shipping equipment used in the terminal are getting more atomized and speedier. thus the efficiency of shipping and discharging depends upon the degree of practice of terminal operating manpower. It means that cultivation of experts in this field is essentially needed and it is becoming a serious problem to guarantee the training programs to provide high-class. high-skilled manpower. The best result can be expected when we use the real equipment for training purposes. but it will cause many difficulties such as budget problem. To overcome this situation. we developed the Virtual Container Crane Simulator(VCCS System) which enables the operator to learn the operation of the equipment as well as safety problems within a short time. VCCS system begins with establishing the direction of operation by setting the appropriate motions for each step. and then it instructs the basic operation. It enhances the driver's ability to cope with accidents during operation and completes and completes the mastery of operating techniques with The repetition of practice.

• 한국해안해양공학회지
• /
• 제6권4호
• /
• pp.327-334
• /
• 1994

실험실 수조에서 조석 및 조류를 발생시키기 위해서는 수조내에 흐름의 분출부와 흡입부를 적절히 설치해야 한다. 분기관은 관수로 측면에 설치된 다수의 구멍을 통하여 관내ㆍ외 압력차에 의해 물을 분출 또는 흡입하는 장치이다. 수조 폭에 따라 균등한 단위폭당 유량을 발생시키기 위해서는 각 구멍의 크기를 적절히 결정해야 하며 이를 위해서는 공급류량, 공급수두, 수두손실, 구멍에서의 분출 및 흡입류량 등의 수리특성을 파악하여야 한다. 본 연구에서는 에너지 방정식과 연속방정식으로부터 비롯되는 비선형 연립방정식을 구성하고 Newton 해법을 적용하여 분출 및 흡입분기관의 수리특성을 파악하였다. 아울러, 자동제어 밸브가 부착된 분기관이 수조폭에 걸쳐 일정한 유량을 유지해야하는 조석수조에 효과적으로 사용될 수 있음을 확인하였다.