• KEPCO Journal on Electric Power and Energy
• /
• 제7권1호
• /
• pp.15-20
• /
• 2021

• 대한전자공학회논문지
• /
• 제26권3호
• /
• pp.79-84
• /
• 1989

본 논문에는 순간출력에 시간지연이 있는 출력을 첨가시킨 새로운 제어법칙을 제안하였다, 제안된 시스템을 해석하기 위하여 시간지연이 없는 시스템으로 변환하는 방법도 제시 하였다. 여기서 제안된 제어법칙은 순간 궤환제어법칙보다 시스템의 응답특성을 개선시킬 수 있었음을 컴퓨터 시뮬레이션으로써 일예를 들어 확인 하였다.

• 대한기계학회논문집A
• /
• 제34권5호
• /
• pp.637-644
• /
• 2010

진동 에너지 기반의 압전 에너지 수확 장치는 외부 가진력의 주파수가 장치의 고유 진동수 (또는 공진 주파수)와 일치하는 경우 최대 전력을 발생시키지만, 이를 벗어난 주파수 대역에서는 전력 발생량이 급격히 감소한다. 그런데, 에너지 수확 장치의 고유 진동수는 시간이 지남에 따라 변할 수 있으며, 가진 주파수 역시 어떤 일정한 값에 항상 고정되어 있는 경우는 드물다. 따라서, 이를 해결하기 위해 본 연구에서는 일정한 공진 대역폭을 갖는 압전 에너지 수확 모듈을 제안하였고 해석 및 실험을 통하여 전기 출력에 대한 주파수 대역특성을 파악하였다. 또한, 제안된 모듈을 구성하는 개별 에너지 수확 단위간의 전기적 연결 방법에 따라서 전기출력이 최대화되는 공진 주파수가 조절될 수 있음을 보였다.

• 한국수소및신에너지학회논문집
• /
• 제33권4호
• /
• pp.419-429
• /
• 2022

Effects of operating variables on temperature profile and performance of 3 MWth chemical looping combustion system were estimated by mass and energy balance analysis based on configuration and dimension of the system determined by design tool. Air reactor gas velocity, fuel reactor gas velocity, solid circulation rate, and solid input percentage to fluidized bed heat exchanger were considered as representative operating variables. Overall heat output and oxygen concentration in the exhaust gas from the air reactor increased but temperature difference decreased as air reactor gas velocity increased. Overall heat output, required solid circulation rate, and temperature difference increased as fuel reactor gas velocity increased. However, overall heat output and temperature difference decreased as solid circulation rate increased. Temperature difference decreased as solid circulation rate through the fluidized bed heat exchanger increased. Effect of each variables on temperature profile and performance can be determined and these results will be helpful to determine operating range of each variable.

• Current Photovoltaic Research
• /
• 제11권2호
• /
• pp.49-53
• /
• 2023

Expanding the supply of BIPV is crucial to strengthening the competitiveness of the photovoltaic industry and achieving Nationally Determined Contributions through the zero-energy building mandatory policy. BIPV is a technology that integrates into the building envelope to generate electricity and provide functions as a building material. It is suitable for domestic environments with many high-rise buildings due to the narrow land area and urbanization. To expand the supply of BIPV, economics, safety, and aesthetics must be ensured. In this study, a color BIPV module with a color PET film applied as a front material was manufactured for aesthetic and economic feasibility. The relationship between power output and transmittance according to color was analyzed. By analyzing the power output of the module and the transmittance of the film, the wavelength band (transmittance reduction band) that has the greatest effect on efficiency was analyzed regarding the color of the film. The red film showed the narrowest transmittance reduction band and the lowest degree of decrease in transmittance, making it ideal for minimizing the efficiency decrease rate compared to existing ones.

• 전기학회논문지
• /
• 제63권9호
• /
• pp.1199-1205
• /
• 2014

A power system configuration has been increasingly advanced with a number of generating units. In particular, renewable energy resources are widely introduced due to the environmental issues. When applying the renewable energy sources with the ESS (Energy Storage System), the ESS is the role of a potential generating resource in the power system while mitigating the output volatility of renewable energy resources. Thus, for applications of the ESS, the surrounding environment of it should be considered, which means that capacity and energy of the ESS can be affected. Moreover, operation strategy of the ESS should be proposed according to the installation purpose as well as the surrounding environment. In the paper, operation strategy of the ESS is proposed considering load demand and the output of renewable energy resources on a hourly basis. Then, the cost of electrical energy is minimized based on the economic model that consists of capital cost, operation cost, fuel cost, and grid cost for a year. It is sure that peak-shaving effects can be achieved while satisfying the minimum cost of electrical energy.

• 자원ㆍ환경경제연구
• /
• 제15권3호
• /
• pp.425-450
• /
• 2006

산업부문은 생산 활동을 담당하는 특성 때문에 많은 에너지를 소비하고 많은 $CO_2$를 배출한다. 산업부문 중에서 에너지다소비산업이라고 일컬어지는 산업들은 다른 산업에 비해서 에너지소비가 많고 $CO_2$ 배출을 많이 하므로 관련정책의 목표대상으로서 우선적으로 거론된다. 그러나 해당 산업의 생산액과 $CO_2$ 배출량을 사용하는 환경원단위는 해당 산업만의 환경오염물질 배출의 정도를 측정하기에는 적합하지만, 산업들이 유기적으로 연결되어 서로 생산품을 수요하고 공급하고 있는 점을 고려한다면 환경원단위를 확대시킨, 그리고 산업 전체를 고려하는 지표로 해당 산업의 환경물질의 배출 정도를 평가해야 한다. 이에 본 논문에서는 우리나라의 환경산업연관표 2000을 작성하고, 에너지다소비산업 외에 전 산업을 대상으로 하여 산출액기준 및 열량기준의 환경원단위와, 이를 보다 확대하고 산업의 유기적 관계까지를 모두 고려하는 유발 $CO_2$ 발생량을 추정하여 우리나라의 경제주체간 및 산업간의 상품생산과 흐름에 수반되는 에너지소비와 환경오염물질의 흐름을 분석하였다. 분석결과에 따르면 산출액기준 및 열량기준의 환경원단위가 상대적으로 높은 산업들의 유발 $CO_2$ 발생량은 크다. 이 산업들은 직접적으로 발생시키는 $CO_2$가 많은 산업들이며, 환경부하가 큰 재화나 서비스를 생산한다. 그러므로 이 산업들을 대상으로 환경원단위 저감을 유도한다면 $CO_2$ 발생량을 감소시킬 수 있다. 그러나 환경원단위가 낮은 산업의 생산 시에 환경원단위가 높은 산업들의 생산품이 투입재로 사용된다면 그 산업의 유발 $CO_2$ 발생량은 커지고 경제 전체의 환경부하를 크게 만든다. 따라서 산출액기준의 환경원단위가 높은 산업들만을 중심으로 하여 환경원단위를 저하시키는 것 외에, 낮은 환경원단위를 갖는 산업들의 환경원단위도 지속적으로 감소시켜 다른 산업에 대한 연관을 통한 유발 $CO_2$ 발생량을 감소시켜야 한다. 이는 모든 산업에 대한 지속적인 환경원단위 저감이 경제 전체를 기준으로 더 큰 $CO_2$ 발생량 저감을 유도하는 것을 의미한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1246-1247
• /
• 2008

With recent advanced in portable electric devices, wireless sensor, MEMS and bio-Mechanics device, the new typed power supply, not conventional battery but self-powered energy source is needed. Particularly, the system that harvests from their environments are interests for use in self powered devices. For very low powered devices, environmental energy may be enough to use power source. Therefore, in other to made piezoelectric energy harvesting device, PMN-PZT thick film was formed by the screen printing method on the Ag/Pd coated alumina substrate. The layer was 8 layers and slurry where a-terpineol, ethycellulose, ferro B-75001 as Vehicle, PMN-PZT powder used are fabricated by ball mill. The output power quality was be also investigated by changing the load resistance, weight and frequency. The made piezoelectric energy harvesting device was resulted from the conditions of 33$k{\Omega}$, 0.25g, 197Hz respectively. The thick film was prepared at the condition of 2.75Vrms, and its power was 230${\mu} W$ and its thickness was 56${mu}m$. The piezoelectric energy harvesting device output voltage was increased, when the load weight, load resistance was increasing and resonance frequency was diminishing. The other side, resonance frequency was diminished, when the weight was increasing. And output power was continuously it changed by load resistance, output voltage, weight and resonance frequency.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.648-658
• /
• 2018

Regarding the fact that wind power forecast accuracy is gradually improved as time is approaching, this paper proposes a two-stage rolling dispatch approach based on model predictive control (MPC), which contains an intra-day rolling optimal scheme and a real-time rolling base point tracing scheme. The scheduled output of the intra-day rolling scheme is set as the reference output, and the real-time rolling scheme is based on MPC which includes the leading rolling optimization and lagging feedback correction strategy. On the basis of the latest measured thermal unit output feedback, the closed-loop optimization is formed to correct the power deviation timely, making the unit output smoother, thus reducing the costs of power adjustment and promoting wind power accommodation. We adopt chance constraint to describe forecasts uncertainty. Then for reflecting the increasing prediction precision as well as the power dispatcher's rising expected satisfaction degree with reliable system operation, we set the confidence level of reserve constraints at different timescales as the incremental vector. The expectation of up/down reserve shortage is proposed to assess the adequacy of the upward/downward reserve. The studies executed on the modified IEEE RTS system demonstrate the effectiveness of the proposed approach.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 학술대회 논문집
• /
• pp.95-99
• /
• 2005

This paper presents a general proposal to design and calculate the performance of a tubular permanent magnet linear generator treated here on the basis of the Finite Element Method. Optimizing the linear generator dimensions reduces the cogging force, which occurs due to the interaction between stator teeth and the permanent magnets. The generated AC voltage is analyzed and evaluated for both no load and load cases to take the armature reaction effects on the air gap flux density. A repetitive routine is followed to calculate the output AC voltage from the change of flux and the speed of the single-phase linear generator. The AC output voltage is calculated for different resistive loads, and hence, the linear generator load characteristic is obtained. The designed linear generator is capable to generate an output power of 5.3kW with AC output voltage of 222V with an efficiency of 96.8% at full load of 23.8A. The full load current is chosen based on the thermal properties of the coil wire insulations.