This study investigates if four propitious sites (四明堂, sa myeongdang) identified in Daesoon Jinrihoe's The Canonical Scripture correspond with the orthodox descriptions of dragon, energy hub, sand, and water (龍穴砂水, yong hyeol sa su) which are held by Fengshui as conditions necessary for that specific designation. In this study, these conditions, based on the shape of the site-formations, were observed via through on-site surveys and the application of the theories presented by traditional books on Fengshui. First, the dragon veins (龍脈, yongmaek) of the energy hub of the Five Immortals Playing Baduk (五仙圍碁穴 oseonwigi- hyeol) on Mount Hoemun in Sunchang consists of solid soil, is like a spiderweb, rises and lays prone, winds in every direction, and looks almost disconnected while actually remaining connected. Second, the Fengshui characteristics of the energy hub of Worship Held by Buddhist Monks from Abroad (胡僧禮佛穴, hoseungyebul- hyeol) on Mount Seungdal in Muan is that the branching feet (枝脚 jigak) support the mountain range by forming a valley to the left and right of the dragon veins that stretch from the peak of Mount Seungdal. Also, the direction-changing helm (橈棹 yodo) supports the mountain range solidly can be said to be well-developed. It is likewise noted that there is an excellent change in dragon veins in that exhibit curvature that spans being high, low, rising, and lying. This makes it appear as though the dragon is wriggling back and forth. Third, the state of the energy hub of Celestial Maidens Weaving Silk (仙女織錦穴, seonnyojikgeum-hyeol) on Sonryong Ridge in Jangseong County demonstrates overall harmony between mountain and water as it is near Mount Ju and Mount An and has a solid water outlet to which it is tightly fastened such that its energy does not leak out. Meanwhile, the positioning of its blue dragon of the east, red phoenix of the south, white tiger of the west, and black tortoise of the north is so intimate that its long flow can be said to be spinning. The Songryong Ridge area where energy hub was formed between soil and bedrock is the right land for a great favored location as it corresponds with Fengshui logic in an exemplary manner. Fourth, the Fengshui characteristics of the energy hub of Subjects Receiving the Imperial Command (群臣奉詔穴, gunshinbongjo-hyeol) at Baerye-jeon Field in Taein can be described as embracing the village snuggly as it centers around Mount Wangja, and its blue dragon and white tiger respond to each other. Additionally, a clear distinction between host and guest is noticeable in the positions of Mount Ju and Mount An. The flowing body of water in front of the village wraps around that village as a Horizontal Water Formation (橫水局, hoengsuguk), and vigorous vapor from the earth draws breath as the yin-yang energy of the landscape courses through the earth. As dragon veins, the range of the mountain, are like the blood vessels within the human body and the dragon is compared to the limbs, the energy hub of Subjects Receiving the Imperial Command at Baerye-jeon Field in Taein can be identified as a favored location that was formed directly by the sky and earth.
Purpose: This study was undertaken to evaluate the clinical features and complication such as esophageal stricture in children with corrosive esophagitis. Methods: We retrospectively reviewed medical records of 31 children who accidentally ingested corrosive materials and visited to emergency room of Chonnam National University Hospital from Jan. 1992 to Dec. 1999. Twenty-one children were examined by upper gastrointestinal (UGI) endoscopy to evaluate location and severity of caustic injury. Results: 1) Among 31 patients, there were 20 males and 11 females and the ratio of male to female was 2:1. Average age at diagnosis was 2.3 years (12 months to 9.8 years). Twenty-seven (87.1%) patients were accidentally ingested vinegar. 2) Initial presenting symptoms were dysphagia (54.8%), vomiting (48.3%), chemical burn on lips and skin (45.2%), excessive salivation (45.2%), coughing and respiratory grunting (32.3%) and aspiration pneumonia (9.8%). 3) UGI endoscopic examination showed caustic injury in 17 children: grade I in 8, grade II in 7 and grade III in 2. The region of caustic injury was proximal esophagus in 5, distal esophagus in 3, entire esophagus in 9 and stomach in 6. 4) Corrosive esophageal strictures developed in 6 children (19.4%) and gastric outlet stricture in 1 (3.2%). All of them showed grade II or III caustic injury on endoscopic examination. Conclusion: The development of esophageal stricture was related to the severity of the caustic injury. Early UGI endoscopic examination in caustic ingestion seems to be useful for prediction of development of caustic stricture.
Korean Journal of Agricultural and Forest Meteorology
/
v.13
no.4
/
pp.176-184
/
2011
Cold air on sloping surfaces flows down to the valley bottom in mountainous terrain at calm and clear nights. Based on the assumption that the cold air flow may be the same as the water flow, current models estimate temperature drop by regarding the cold air accumulation at a given location as the water-like free drainage. At a closed catchment whose outlet is blocked by man-made obstacles such as banks and roads, however, the water-like free drainage assumption is no longer valid because the cold air accumulates from the bottom first. We developed an empirical model to estimate quantitatively the effect of cold pool on nocturnal temperature in a closed catchment. In our model, a closed catchment is treated like a "vessel", and a digital elevation model (DEM) was used to calculate the maximum capacity of the cold pool formed in a closed catchment. We introduce a topographical variable named "shape factor", which is the ratio of the cold air accumulation potential across the whole catchment area to the maximum capacity of the cold pool to describe the relative size of temperature drop at a wider range of catchment shapes. The shape factor is then used to simulate the density profile of cold pool formed in a given catchment based on a hypsometric equation. The cold lake module was incorporated with the existing model (i.e., Chung et al., 2006), generating a new model and predicting distribution of minimum temperature over closed catchments. We applied this model to Akyang valley (i.e., a typical closed catchment of 53 $km^2$ area) in the southern skirt of Mt. Jiri National Park where 12 automated weather stations (AWS) are operational. The performance of the model was evaluated based on the feasibility of delineating the temperature pattern accurately at cold pool forming at night. Overall, the model's ability of simulating the spatial pattern of lower temperature were improved especially at the valley bottom, showing a similar pattern of the estimated temperature with that of thermal images obtained across the valley at dawn (0520 to 0600 local standard time) of 17 May 2011. Error in temperature estimation, calculated with the root mean square error using the 10 low-lying AWSs, was substantially decreased from $1.30^{\circ}C$ with the existing model to $0.71^{\circ}C$ with the new model. These results suggest the feasibility of the new method in predicting the site-specific freeze and frost warning at a closed catchment.
As information technology fusion is accelerated, the researches to improve the quality and productivity of crops inside a plant factory actively progress. Advanced growth environment management technology that can provide thermal environment and air flow suited to the growth of crops and considering the characteristics inside a facility is necessary to maximize productivity inside a plant factory. Currently running plant factories are designed to rely on experience or personal judgment; hence, design and operation technology specific to plant factories are not established, inherently producing problems such as uneven crop production due to the deviation of temperature and air flow and additional increases in energy consumption after prolonged cultivation. The optimization process has to be set up in advance for the arrangement of air flow devices and operation technology using computational fluid dynamics (CFD) during the design stage of a facility for plant factories to resolve the problems. In this study, the optimum arrangement and air flow of air circulation fans were investigated to save energy while minimizing temperature deviation at each point inside a plant factory using CFD. The condition for simulation was categorized into a total of 12 types according to installation location, quantity, and air flow changes in air circulation fans. Also, the variables of boundary conditions for simulation were set in the same level. The analysis results for each case showed that an average temperature of 296.33K matching with a set temperature and average air flow velocity of 0.51m/s suiting plant growth were well-maintained under Case 4 condition wherein two sets of air circulation fans were installed at the upper part of plant cultivation beds. Further, control of air circulation fan set under Case D yielded the most excellent results from Case D-3 conditions wherein air velocity at the outlet was adjusted to 2.9m/s.
Recently, due to the deterioration of watermains and the detachment of scale which is accumulated on the watermain surface, water quality accidents in a water supply network occur frequently. As scale accumulated on watermains is stabilized, it may not cause water quality accidents under the normal operating condition. However, due to water hammer or transient flow caused by the abrupt velocity and/or direction of flow change, it can be detached from the watermain surface resulting in water quality accidents. To prevent these kinds of water quality accidents, it is required to remove scale by watermain cleaning regularly. Many researches about flushing which is the most popular water cleaning method are focused on the desirable velocity criteria and the cleaning condition to accomplish the effect of flushing whereas less amount of research effort is given to develop a method to consider whether the desirable velocity for flushing can be obtained before flushing is performed. During flushing, the major and minor headloss is occurred when flushing water flows through a hydrant or drain valve. These headloss may slow down the velocity of flushing water so that it can reduce the flushing effect. Thus, in this study, we suggest a method to simulate the flow velocity of flushing water using "MinorLoss Coefficient" and "Emitter Coefficient" in EPANET. The suggested method is applied to a sample network and the water supply network of "A" city in Korea to compare the flushing effect between "flushing through a hydrant" and "flushing through a drain valve". In case of "flushing through a hydrant", if the hydraulic condition ocurring from a watermain pipe connecting to the inlet pipe of a hydrant to the outlet of a hydrant is not considered, the actual flowrate and velocity of a flow is less than the simulated flowrate and velocity of a flow. In case of "flushing through a drain valve", the flushing velocity and flowrate can be easily simulated and the difference between the simulated and the actual velocity and flowrate is not significant. Also, "flushing through a drain valve" is very effective to flushing a long-length pipe section because of its efficiency to obtain the flushing velocity. However, the number and location of a drain valve is limited compared to a hydrant so that "flushing through a drain valve" has a limited application in the field. For this reason, the engineer should consider various field conditions to come up with a proper flushing plan.
Internet commerce has been growing at a rapid pace for the last decade. Many firms try to reach wider consumer markets by adding the Internet channel to the existing traditional channels. Despite the various benefits of the Internet channel, a significant number of firms failed in managing the new type of channel. Previous studies could not cleary explain these conflicting results associated with the Internet channel. One of the major reasons is most of the previous studies conducted analyses under a specific market condition and claimed that as the impact of Internet channel introduction. Therefore, their results are strongly influenced by the specific market settings. However, firms face various market conditions in the real worlddensity and disutility of using the Internet. The purpose of this study is to investigate the impact of various market environments on a firm's optimal channel strategy by employing a flexible game theory model. We capture various market conditions with consumer density and disutility of using the Internet.
shows the channel structures analyzed in this study. Before the Internet channel is introduced, a monopoly manufacturer sells its products through an independent physical store. From this structure, the manufacturer could introduce its own Internet channel (MI). The independent physical store could also introduce its own Internet channel and coordinate it with the existing physical store (RI). An independent Internet retailer such as Amazon could enter this market (II). In this case, two types of independent retailers compete with each other. In this model, consumers are uniformly distributed on the two dimensional space. Consumer heterogeneity is captured by a consumer's geographical location (ci) and his disutility of using the Internet channel (${\delta}_{N_i}$).
shows various market conditions captured by the two consumer heterogeneities.
(a) illustrates a market with symmetric consumer distributions. The model captures explicitly the asymmetric distributions of consumer disutility in a market as well. In a market like that is represented in
(c), the average consumer disutility of using an Internet store is relatively smaller than that of using a physical store. For example, this case represents the market in which 1) the product is suitable for Internet transactions (e.g., books) or 2) the level of E-Commerce readiness is high such as in Denmark or Finland. On the other hand, the average consumer disutility when using an Internet store is relatively greater than that of using a physical store in a market like (b). Countries like Ukraine and Bulgaria, or the market for "experience goods" such as shoes, could be examples of this market condition.
summarizes the various scenarios of consumer distributions analyzed in this study. The range for disutility of using the Internet (${\delta}_{N_i}$) is held constant, while the range of consumer distribution (${\chi}_i$) varies from -25 to 25, from -50 to 50, from -100 to 100, from -150 to 150, and from -200 to 200.
summarizes the analysis results. As the average travel cost in a market decreases while the average disutility of Internet use remains the same, average retail price, total quantity sold, physical store profit, monopoly manufacturer profit, and thus, total channel profit increase. On the other hand, the quantity sold through the Internet and the profit of the Internet store decrease with a decreasing average travel cost relative to the average disutility of Internet use. We find that a channel that has an advantage over the other kind of channel serves a larger portion of the market. In a market with a high average travel cost, in which the Internet store has a relative advantage over the physical store, for example, the Internet store becomes a mass-retailer serving a larger portion of the market. This result implies that the Internet becomes a more significant distribution channel in those markets characterized by greater geographical dispersion of buyers, or as consumers become more proficient in Internet usage. The results indicate that the degree of price discrimination also varies depending on the distribution of consumer disutility in a market. The manufacturer in a market in which the average travel cost is higher than the average disutility of using the Internet has a stronger incentive for price discrimination than the manufacturer in a market where the average travel cost is relatively lower. We also find that the manufacturer has a stronger incentive to maintain a high price level when the average travel cost in a market is relatively low. Additionally, the retail competition effect due to Internet channel introduction strengthens as average travel cost in a market decreases. This result indicates that a manufacturer's channel power relative to that of the independent physical retailer becomes stronger with a decreasing average travel cost. This implication is counter-intuitive, because it is widely believed that the negative impact of Internet channel introduction on a competing physical retailer is more significant in a market like Russia, where consumers are more geographically dispersed, than in a market like Hong Kong, that has a condensed geographic distribution of consumers.