• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.3
• /
• pp.41-49
• /
• 2000

When sewage and industrial wastewater are treated to improve the coastal water quality, we usually consider the reduction of BOD and/or COD. Due to the inflow of untreated nitrogen and phosphorus, however, the coastal water has eutrophicated. Thus, to improve the water qualify, it is necessary to treat and reduce nitrogen and phosphorus which are the factors limiting algal growth. Hence, with regard to the adaption of Ocean Outfall for the treatment of wastewater in Suyoung Bay, we studied the effectiveness and environmental assessment of Ocean Outfall of which cost is lower than that of advanced treatment, The effectiveness of Ocean Outfall of the second treatment effluent in Nambu S.T.P. was simulated, using the eco-hydrodynamic model as far field model the result showed that the water quality of coastal area receiving wastewater on the surface sea has improved. But the concentrations of nitrogen and phosphorus around the diffuser of Ocean Outfall system can cause many problems on estuary, such as red tide, eutrophication and aquatic toxicity.

• Water Engineering Research
• /
• v.1 no.4
• /
• pp.309-320
• /
• 2000

In this study, laboratory study of the behavior of wastewater discharged from the Boston ocean outfall was compared with the predictions of mathematical models. The dta sets cover broad ranges of discharge conditions and oceanic conditions, and are associated with a typical type of outfall discharges with multiport diffusers. The laboratory data sets were obtained in density stratified towing tanks. These data sets were used to evaluate four commonly used models: UM, UDKHDEN, RSB and CORMI$\times$2 for minimum dilution, the height to the top of the wastefield, and wastefield thickness. For minimum diluation and height to the top of the wastefield, UM and RSB predictions agree well with laboratory data. UDKHDEN overestimated the minimum dilution and height to the top of the wastefield while CORMI$\times$2 underestimated these values. All of the model predictions for the wastefield thickness were widely scattered. about the measured values. The hydraulic model study reproduced the major features observed in the laboratory. It also afforded considerable insight into the mechanics of mixing of multiport risers which could not have been obtained either from the laboratory test or the mathematical models.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.4
• /
• pp.461-469
• /
• 2004

This research is to determine the stormwater effects on sewer concentrations by measuring and comparing the flow and pollutant concentrations during dry and rainy periods in the existing BOX type combined sewer pipes. The monitoring was carried out in two sites, which are the Daesachen outfall having PE separation wall in BOX type combined sewer pipes and the Yongunchen outfall not having seperatioin wall. The average flow-weighted BOD concentraion in Yongunchen outfall is 2-fold lower than in Daesachen outfall because of the dilution effect from ravine water. However, the pollutant mass loading is 16 fold higher in Yongunchen outfall than in Daesachen outfall because of more flows. According to the research, the separation wall controls 52% pollutant mass during a storm period (11.5 mm/hr rainfall intensity). Therefore, the Yongunchen combined sewer system (CSS) need separation wall to control and to prevent more pollutant input in stream. In Daesachen area, the maximum sewer flow rate during a storm period measured about 10 fold bigger than average sewer flow during dry periods. Also the concentrations between rainy and dry periods increase approximately 33 fold for BOD and 120 fold for SS. In Yongunchen area, it increases about 9 fold for the maximum flow rate, 18 fold for BOD and 22 fold for SS during a storm. Therefore, the research is concluded that the separation wall between stromwater (or ravine water) and sewage can decrease the dilution effect in CSS and control the pollutant loading.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 1997.10a
• /
• pp.52-53
• /
• 1997

수역의 유기오염 개선을 위하여 생활하수, 산업폐수 등의 저하시키는데 주안점을 두어왔으나 공공수역에서의 제거되지 않은 질소와 인의 유입으로 부영양화가 진행되어 하천에는 남조류가 대량발생하고 해역에는 적조가 광역에서 발생하여 큰 사회문제가 되고 있고, 질소와 인의 유입으로 인한 자생 COD가 전체COD의 약 절반을 차지하고 있는 실정이다. 따라서 앞으로의 수질을 개선하기 위해서는 조류증식의 제한인자인 질소와 인의 규제가 필요할 뿐만아니라 하수처리장에 고차처리를 적용하거나, 해양의 회석자용을 이용한 Ocean을 적용하여 연안해역 수질을 관리해야 할 것이다. 따라서 본 연구는 수영만을 대상으로 Ocean Outfall과 폐수처리시절을 적절하게 조합하기 위해서 3차원 생태계모델을 적용하여 유기물질 뿐만 아니라 영양염류인 질소와 인의 농도를 예측하여 환경기준을 만족시키고 비용을 최소화 할 수 있는 폐수처리공법과 해중방류관의 위치를 선정하고자 하였다. 본 연구결과 수영만의 1994년 COD는 II등급, DIN과 DIP는 III등급이었다. 현재의 활성슬러지공법으로 질소와 인을 제거하지 않고 방류할 경우 2001년에 는 하수처리량의 증가로 인해 COD의 경우 1994년 보다 조금 감소하지만 DIN 과 DIP는 1994년과 같은 III등급을 유지하였다. 고도처리공법을 도입할 경우 COD의 농도는 광안리와 해운대해수욕장에서 I등급을 보이고, DIP의 농도도 수영만 전체에서 강등급을 보이지만, DM의 농도는 광안리해수욕장에서 II등급, 해운대해수욕장에서 IH등급을 보였다 하수처리장 유출수를 Ocean Outfall을 이용하여 하수처리장으로부터 4km에 서 방류할 경우의 COD농도는 I등급을 보이고, DE 농도도 광안리와 해운대해 수욕장에서는 I등급을 보이고, DU의 농도는 ll등급을 보여 수질이 개선된 것 을 볼 수 있다. 이상에서와 같이 광안리와 해운대해수욕장의 해역환경기준 ll등급을 만족 하는 하수처리방법은 Ocean Outfall이었다. 수영하수처리장에 인을 처리하기 위한 화학적 침전법의 경우 956억원이 소요되고, 질소를 제거하기 위한 질소제거공정을 추가 건설 할 경우는 2181억원이 전요된다. 그리고 두공정을 같이 건설할 경우에는 3137억원의 비용이 소요된다 수영하수처리장에서 4km 거리와 관경을 2m의 Ocean Outfall 건설비용은 325 억원 정도가 소요되는 것으로 산출되었다. 고차처리시 증가되는 비용으로 건설할 수 있는 Ocean Outfall의 길이는 인 제거공정을 첨가하는 경우에는 18km을 건설할 수 있고, 질소제거공정을 첨가 하는 경우에는 46km를 건설할 수 있는 것으로 산출되었다.

• Journal of Navigation and Port Research
• /
• v.32 no.8
• /
• pp.637-643
• /
• 2008

When planning outfall system, the first target cif design is to maximize initial dilution of discharge effluent. To achieve the target effectively, the characteristics of mixing phenomenon between ambient and discharged water should be analyzed. Especially the analysis at the Near-Field-Region(NFR) as initial dilution zone should be preceded. Usually, the initial behavior of effluent through outfall system is rising toward the surface due to mixing with ambient water for heat discharge and sinking toward the bottom due to the difference of density for brine discharge. After mixed with eddies accompanied by the ambient water, the plumes are showing the same density and internal current pattern by advection and diffusion. Until recently, lots of studies are being carried out for the optimum design of outfall system. but it is difficult to find any studies of heat and brine discharge at the same time. Therefore, this study is hoped to provide some basic data for optimum design of outfall system.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.3
• /
• pp.124-132
• /
• 2009

The optimal type and discharging position of ocean outfall of wastewater have been determined by hydrodynamic modeling, near-field dilution modeling, and far-field dispersion modeling. Tide and tidal currents have been simulated by a finite element hydrodynamic model showing good agreements with field observations. Based on the hydrodynamic simulation results candidates of ocean outfall position were preliminary determined. Submerged single port and submerged multi-port diffuser were selected as discharging system alternatives and finally designed by considering tide, tidal currents and water depth. Initial dilution of wastewater discharged from the designed ports has been estimated by CORMIX system. A 2-dimensional random-walk dispersion model has been employed to simulate far-field dispersion of discharged wastewater.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.55 no.6
• /
• pp.954-959
• /
• 2022

Marine outfalls are used to discharge treated liquid effluents to the environment. An efficiently designed, constructed and operated marine outfall effectively dilutes the discharged effluent, thereby reducing the risk to biota and humans dependent upon the marine environment. In this study, we investigated the effluent transport from a marine outfall at different depths in Masan Bay. A particle-tracking model was used to predict the dispersion of effluent. The model results indicate that some particles released from a depth of 13 m move to the inner area of Masan Bay within 48 h. As the release depth increases after 48 h, the particles move further southward. This suggests that effluent from the outer area of Masan Bay can affect the inner area, and that this effect can be reduced by increasing the depth of effluent release.

• Journal of Navigation and Port Research
• /
• v.28 no.3
• /
• pp.259-268
• /
• 2004

For the last years, it has become hot issue such as disposal of the treated wastewater, which caused by increment of a population and industrial development at the coastal areas. The ocean outfall system discharges primary or secondary treated effluent into coastline or at the deep water, or between these two. The effluent, which has a density similar to that of fresh water, rises to the see, surface forming plume or jet, together with entraining the surrounding salt water and becomes very dilute. This paper deals ocean outfall design which effects to decision-making about marine environment management and wastewater treatment. In order to make predictions of dilution of discharged water and the trajectory of a plume, CORMIX has been used considering several elements including a seasonal and tidal changes. These solutions are strung together to provide basic data and general drawings for effective management of outfall.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.2
• /
• pp.60-69
• /
• 1999

In this paper, we have obtained the initial and near-field dilution rates of wastewaters discharged from the ocean outfall of Masan-Changwon municipal wastewater treatment plant from both of field measurements and CORMIX model simulations. In the summer of 1998, water temperature and salinity profiles was measured at 16 stations in the vicinity of the Masan outfall and the dilution rates were analyzed by salinity deficit method. The transport of the wastefields and their initial dilution rates were calculated by CORMIX model using field data as model input. Both of observed and predicted results are shown In very low dilutions with the range of 32～48 from the field data analysis and 29～43 from the model prediction, respectively. This indicates that the water quality in the Masan outfall area can be worsening due to the low dilution rates of diswastewaters, especially, when the ambient currents are very weak in a neap tide and ambient water density is highly stratified in summer.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.272-277
• /
• 2005

Initial mixing characteristics in near field regions were analyzed by FLOW-3D, for analyzing mixing behavior of submerged discharge from freshwater lake in sea water. FLOW-3D model was applied to the region near Geum-ho dike for its verification. Simulation results from FLOW-3D were compared to the observed data for the verification periods. FLOW-3D showed resonable prediction results compared to the observed data, except underestimation in area near outfall. Particularly, FLOW-3D showed a good prediction for movement of buoyancy jets. In addition, FLOW-3D model was applied to the region near Saemangeum dike, which is to be constructed in near future. It was expected that the results of model application to Saemangeum area could provide substantial information in planning submerged discharge facilities. Based on the model applications to Saemangeum area, it was recommended that outfall should be located to the distance which gave an enough depth of outfall from water surface.