• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.924-926
• /
• 2001

This paper presents the characteristics of current harmonics and torque ripple of Brushless DC motor, which is developed the fan blower of vehicles, according to permanent magnet shape input voltage wave form. To investigate the torque ripple and the phase current harmonics, these characteristics is analysed and compared the experimental results. In the process of analysis, FEM is introduced and computed a transient state torque of BLDC with a sinusoidal and a PWM wave voltage.

• Journal of Magnetics
• /
• v.19 no.4
• /
• pp.393-398
• /
• 2014

This paper proposes new types of models that have coaxial magnetic gear (CMG) configurations to increase torque transmission capability. They have flux concentrating structures at the outer low speed rotor, and permanent magnets (PMs) are embedded in the space between stationary pole pieces. The torque performances of the proposed models are compared with those of a basic CMG model. The harmonic torque components due to air gap field harmonics are also analyzed to investigate the torque contribution of each harmonic by using finite element analysis (FEA) and the Maxwell stress tensor. The proposed CMG model is optimized to have high torque density with low torque ripples by response surface methodology (RSM). Compared to the basic CMG model, the proposed model has a huge increase in transmitted torque density, and is very advantageous in term of PM use.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.164-167
• /
• 2005

In this paper, the design and characteristics of a ${\pi}-shaped$ ultrasonic motor which is applicable to optical zoom operation of lenssystem for mobile phone are investigated. Its desi후 and simulation of performances are carried out by FEM (finite element method) commercial software. As a simulation result, by applying voltage with single phase, a combined vibration is produced at the surface of an arm of stator. The prototype of motor is fabricated and its outer size is 8*4*2 $mm^3$ including the cylindrical steel rod of 2 mm in diameter as rotor. The motor exhibits a maximum speed of 500 rpm and a power consumption of 0.3 W when driven at 20 Vpp and 64 kHz.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.62-64
• /
• 2008

본 논문에서는 기존의 Particle Swarm Optimization (PSO) 알고리즘에 반발 속도 (Repulsion Velocity) 개념을 도입한 개선된 PSO 알고리즘을 제안하였다. 낮은 적합도를 가지는 지역을 멀리하는 성질을 모사한 것이 반발 속도의 개념이다. 반발 속도의 개념을 도입한 제안된 알고리즘은 기존의 알고리즘에 비해서, 더 좋은 수렴 특성을 가지고, 더 빠른 계산 특성을 가짐을 알 수 있었다. 시험 함수를 통해서 제안된 알고리즘의 검증을 수행하였고, 외전형 영구자석형 전동기의 최적화에 적용하여서 그 결과를 나타내었다.

• Journal of Korea Foundry Society
• /
• v.17 no.1
• /
• pp.67-75
• /
• 1997

The semisolid processing of two Al-Si alloys, A356 and Al-25wt%Si, was studied with using the rotor composed of permanent magnets. The semisolid slurry was agitated by the electromagnetic force induced from the rotating permant magnets. The round shaped primary ${\alpha}$ phases were formed in A356 alloy as a result of agitation. In Al25wt%Si alloy, spherodization of primary Si particles was not observed with the rotation of the magnets. The primary Si particles were segregated to the outer surface area of sample, which became pronounced with increasing the rotating speed of magnets.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.3
• /
• pp.350-355
• /
• 2011

This paper deals with the comparison of magnetic characteristics in transverse flux rotary machine according to different stator core composition with the same rotor. Three different stator designs are considered in the analysis according to the material composition of inner and outer stator cores. Electromotive force (EMF), inductance, torque, and core losses are calculated by threedimensional finite element analysis. Calculated and measured results of back-EMF according to the analysis models in dependency on speed are presented.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.785-786
• /
• 2006

Performance comparison of IPMSMs with distributed and concentrated winding is presented in this papcr. Two IPMSMs have been designed and fabricated with identical rotor dimension, air-gap length, series turn number, stator outer radius, and axial length except winding configuration. Basic parameters and machine performance, such as resistances, back emf, output torque, and efficiency, are compared. From the comparison results, motor design considering winding configuration is discussed.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.104-106
• /
• 2004

본 논문에서는 세탁기용 외전형 BLDC 전동기를 기본 모델로 하고, 이를 FEM 상용프로그램인 Maxwell을 이용하여 해석 및 설계를 하고자 한다. 본 논문에서 설계대상으로 하는 외전형 BLDC 전동기는 기존에 사용중인 모델로서, 내부의 고정 전기자는 기존의 모델에 맞도록 외경을 그대로 유지하면서 Teeth 등을 설계변수로 하였고, 외부의 회전 자석계자는 주어진 외경의 치수 범위 내에서 영구자석의 형상과 두께 회전자 요크의 두께 등을 설계 변수로 하여 코깅 토오크가 최소가 되도록 최적 설계를 하였다. 유한요소법을 적용하여 자속분포, 코깅 토오크, 토오크 둥을 해석하였고, 코깅 토오크의 최소화를 통하여 효율 및 전동기의 성능을 향상시켰다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.3
• /
• pp.405-410
• /
• 2015

This paper deals with the design method of 1kW-Switched Reluctance Generator (SRG) for wind power applications. The coefficient of the output equation is determined according to the purpose specification for design of SRG. Detailed design is carried out, after selecting the outer diameter of the rotor on the basis of the output equation. The generation characteristic of designed generator is verified by using Finite Element Method (FEM).

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.388-390
• /
• 1999

This paper discusses an optimal design of high space factor BLDC motor. Because of high space factor BLDC, Nonliear finite element method considering saturation of outer-rotor is used. For optimal design, a new niching genetic algorithm, namely "Restricted Competitions Selection" is used. This algorithm constructs an objective function using only the most important criteria and provides a designer with a set of solution rather than one solution. To verify its effectiveness, the new niching genetic algorithm is applied to an actual high space factor BLDC motor We show that a new designed high space factor BLDC motor is superior to the actual high space factor BLDC.