• Microbiology and Biotechnology Letters
• /
• v.44 no.4
• /
• pp.493-496
• /
• 2016

Peach rosette mosaic virus (PRMV) is a plant virus that was first reported in 1933 by Peach. It can infect hosts including peach, grape, blueberry, dandelion, plum, cherry tree, and weeds. PRMV is non-reportable in Korea, but it is designated as a controlled virus requiring plant quarantine. In this study, for the rapid and specific detection of PRMV, we developed an assay using loop-mediated isothermal amplification (LAMP). Comparison between conventional polymerase chain reaction (PCR) methods (real time-PCR and nested PCR) and LAMP for the detection of PRMV revealed an equivalent level of sensitivity by all the tested methods. For the LAMP assay, outer primer sets were used to amplify a 264-bp PCR product, which was then digested using the restriction enzyme Pvu II (CAG/CTG), and the visualization of two digestion fragments (207 + 57 bp) indicated a positive reaction. The developed LAMP assay for PRMV is expected to enable the rapid monitoring of PRMV in plants.

• Nuclear Engineering and Technology
• /
• v.42 no.5
• /
• pp.576-581
• /
• 2010

KAERI (Korea Atomic Energy Research Institute) fabricated MOX (Mixed Oxide) fuel pellets as a cooperation project with PSI (Paul Scherrer Institut) for an irradiation test in the Halden reactor. The MOX pellets were fitted into fuel rods that included instrumentation for measurement in IFE (Institutt for Energiteknikk). The fuel rods were assembled into the test rig and irradiated in the Halden reactor up to 50 MWd/kgHM. The irradiated fuel rods were transported to the IFE, where ceramography was carried out. The fuel rods were cut transversely at the relatively higher burn-up locations and then the radial cross sections were observed. Micrographs were analyzed using an image analysis program and grain sizes along the radial direction were measured by the linear intercept method. Radial cracks in the irradiated MOX were observed that were generally circumferentially closed at the pellet periphery and open in the hot central region. A circumferential crack was formed along the boundary between the dark central and the outer regions. The inner surface of the cladding was covered with an oxide layer. Pu-rich spots were observed in the outer region of the fuel pellets. The spots were surrounded by many small pores and contained some big pores inside. Metallic fission product precipitates were observed mainly in the central region and in the inside of the Pu spots. The average areal fractions of the metallic precipitates at the radial cross section were 0.41% for rod 6 and 0.32% for rod 3. In the periphery, pore density smaller than 2 ${\mu}m$ was higher than that of the other regions. The grain growth occurred from 10 ${\mu}m$ to 12 ${\mu}m$ in the central region of rod 6 during irradiation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.8
• /
• pp.1060-1074
• /
• 2013

This study measured and analyzed pressure at each measurement part of imported compression stockings sold in Korea to provide basic information to establish a pressure standard and grade ranking. This study used 40 medical compression stockings imported from 6 countries. Pressure measurements were taken at 11 points: front side and back side of ankle, end-point of the gastrocnemius muscle, front, inner side, back, and outer side of calf, back side of below knew girth, inner side, and outer side of mid-thigh girth, and inner side of thigh girth. AMI 3037-10 and AMI 3037-2 were used for measurements taken inside an environmental chamber at a temperature of $21^{\circ}C$ and a relative humidity (RH) of 65%. For the measurements, 11 air pack sensors were attached to a wooden model leg (Hohenstein) and three measurements were taken at each measurement point in three minutes. The average of these measurements was used for analysis. The findings of this study were as follows. As for the front side of the ankle, of the 40 products, 14 products (6 USA, 2 Swiss, 3 Italian, and 2 Taiwanese) were within the pressure range indicated on the product label; however, no German products fell within the pressure range. A total of 8 products (5 USA, 1 Swiss, 1 Italian, and 1 German) were gradient compression type; however, no Japanese or Taiwanese product were of this type. The majority of products had the highest pressure at the end-point of the gastrocnemius muscle. Only 3 products, 1 USA (Jobst Opaque 30-40mmHg), 1 Swiss (Sigvaris Cotton 34-46mmHg) and 1 Italian (Jobstocking 25-32mmHg), had measurements that met the indicated standard pressure, were a gradient compression type, and met the overall standard for compression stockings.

• The Research Journal of the Costume Culture
• /
• v.22 no.5
• /
• pp.655-669
• /
• 2014

This study was to examine the service and the product evaluation factors of Korean internet fashion shopping malls and to suggest marketing implications for Korean internet fashion shopping malls wanting to expand into the Chinese market. This study conducted a questionnaire survey for college female students in Qingdao, China, who have shopped at Korean internet shopping malls, and 310 surveys were used in the final analysis, frequency analysis, factorial analysis, and regression analysis. The results of the study were as follows. First, Most of the respondents answered that they found the Korean internet fashion shopping malls through the internet, and the most purchased item was outer clothing. Second, the system stability and web site structure excellence factors had a positive influence on the service satisfaction for the shopping mall 'S', while the system satisfaction, service efficiency, interactivity and web site structure excellence factors had positive influences on service satisfaction for the shopping mall 'P', and the system satisfaction, service efficiency, interactivity factors had positive influences on service satisfaction for the shopping mall 'N'. Third, examining the correlation between product satisfaction for the shopping mall 'S', 'P', and 'N' with fashion product evaluation factors showed that, design factors and quality excellence factors of the three shopping malls had positive influences on product satisfaction. The results of this research provide useful information in forming an efficient operating system and improving marketing strategies for internet fashion shopping malls planning to enter or having already entered the Chinese market.

• The Korean Journal of Air & Space Law and Policy
• /
• v.28 no.2
• /
• pp.183-221
• /
• 2013

While in the early stages of space activities only a few states engaged in the use of outer space, as is well known, commercial space activities have grown dramatically in recent years. Both states, state institutions, and international governmental organizations as well as many private enterprises are engaged in such commercial use of outer space by now. This development is not reflected in the present state of space law. The existing international instruments of space law were developed and finalized before this development and thus only provide very few and sometimes unfitting provisions for the commercial use of outer space and particularly the use by private enterprises. Law formulated in an era when the word "privatization" had not even been coined cannot contain potential problems caused by the increasing commercialization of outer space. For the promotion and further development of such commercial use of outer space it is necessary to clarify and establish the legal framework for such use, because participants will need this information for their future investments in this field. The purpose of this paper is to research and make an analysis of the contents and international regulation of international space commerce, which is rapidly proliferating and to review the process of improvement on national legislations relating to the commercialization of outer space in a few main space advanced countries to make the sustainable progress of commercial space activities project in international society. The legal implications of matters such as international commercial launch services, the liability aspects of such services, intellectual property rights, insurance, product liability insurance and materials processing could one day will be subject to regulated by international space law as well as domestic law. In fact, the question of commercialization is linked to the question of sharing benefits of space activities, and this currently is an agenda item in the Legal Subcommittee of UN COPUOS. Most of developed countries have enacted the national legislation for commercial space activities relating to the development of our space as follows : The National Aeronautic and Space Act of 1958 and the Commercial Space Act of 1998 in the United States, Outer Space Act of 1986 in England, Establishment Act of National Space Center of 1961 in France, Canadian Space Agency Act of 1990 in Canada, Space Basic Act of 2008 in Japan, and Law on Space Activity of 1993 in Russia. Becides there are currently three national legislations relating to space development and commercial space activities in Korea as follows : Aerospace Industry Development Promotion Act of 1987, Outer Space Development Promotion Act of 2005, Outer Space Damage Compensation Act of 2008. Commercial space great promise for the utilization and expansion of human outer space activities but aspring commercial actors must recognize that foreign policy, as well as obligations to the international community as a whole, ensure that commercial space activities will not operate in a legal and regulatory vacuum. As commercial space matures the law and accompanying regulation will most certainly evolve and choose to become participants in the inevitable evolution of law and regulation.

• Particle and aerosol research
• /
• v.8 no.4
• /
• pp.133-141
• /
• 2012

A new depth filter media was designed and samples of flat sheet as well as cartridge assembly were prepared and tested to evaluate the filtration performance and compare with the commercial product. The arrangement of the depth filter media layers is important to reach the optimal filtration parameters like filter pressure drop, particle collection efficiency and dust holding capacity. Initially, both flat sheet samples of new media and commercial product have been tested using standard test units. Tests with new depth filter media cartridges of various pleat count were conducted in order to find the optimal pleat count which would represent the lowest pressure drop. These tests give an insight on how the pleat count and the assembly configuration affect the performance of the depth filter media cartridge. By comparing the samples with a commercial product we could confirm relatively high filtration performance of the sample cartridge with pleat count 150 made of new depth filter media. The cartridge with the same pleat count exhibits better performance without the outer mesh.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.4
• /
• pp.449-455
• /
• 2016

We developed a type of sausage made of chicken breast and liquid egg whites for consumers interested in weight management. To determine the quality of the product, its chemical characteristics, fatty acid composition, free amino acid contents, and nucleotides contents were evaluated during 4 weeks of storage. Sensory evaluation was conducted by both general consumers and body-builders. The sausage was proposed as a fat-free product as fat content was 0.12% based on the Korean Indication Standard of Animal Origin Food. Protein content was 13.42% and calorie value was 61.50 kcal/100 g of the sausage. In sensory evaluation, the mixture of chicken breast and egg whites stuffed into the same casing had an adverse effect on taste, color, texture and overall acceptance while the product that contained egg white stuffed separately into the outer casing enclosing the chicken breast (double layer) improved these attributes. The developed double-layer sausage can last for at least 4 weeks of storage without quality deterioration of flavor-related compounds, such as fatty acids and nucleotides.

• Journal of the Korean Dietetic Association
• /
• v.3 no.1
• /
• pp.90-100
• /
• 1997

Objectives of this study were to investigate the acceptability of liver sausages, one of the most favorite product of meats, and to examine the applicability of pork liver in manufacturing sausages. Sausages containing different proportions of pork liver were manufactured with various processes and were tested and analysed by means of sensory evaluation. Based on th basic recipe for manufacturing sausages, fifteen recipies were proposed with different combinations of ingredients, followed by evaluations on their physicochemical and nutritional properties. Sausages manufactured with different methods (sliceable, spreadable, smoked spreadable) and different proportions of liver were also evaluated. The Findings from these experiments are summarized as follows: 1. As the percentage of the liver was increased, outer color of experimental sausages were significantly decreased. 2. The hardness, gumminess, chewiness were significantly decreased as the amount of liver increased. 3. Sausages containing 30% pork liver had best acceptability after swallowing. 4. The flavor and taste of liver in experimental sausages were significantly increased by adding liver. In summary, sausages containing 30% pork liver had best acceptability for consumption in terms of the indices measured in this study.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.6
• /
• pp.88-96
• /
• 2006

The objective of this research works is to develop back panel dies of PDP TV with a large size. In order to design the geometry of the dies and an initial size of blank optimally, the finite element analysis has been carried out using AUTOFORM V4.2. The conner radius of the upper trimming area and the distance from the outer line of the blank holder to the outer line of the blank have been selected as design parameters to remove the wrinkling of the trimming area. The results of the analyses have been shown that a feasible product without wrinkles and skid lines can be obtained when the conner radius ranges from 6mm to 8mm and the distance lines in the range of 40-60mm. From the proposed design of the dies and an initial blank size, the final die set of the back panel has been successfully manufactured.

• Journal of Arbitration Studies
• /
• v.20 no.2
• /
• pp.173-198
• /
• 2010

The purpose of this paper is to research on the liability for the space damage and the settlement of the dispute with reference to the space activity under the international space treaty and national space law of Korea. The United Nations has adopted five treaties relating to the space activity as follows: The Outer Space Treaty of 1967, the Rescue and Return Agreement of 1968, the Liability Convention of 1972, the Registration Convention of 1974, and the Moon Treaty of 1979. All five treaties have come into force. Korea has ratified above four treaties except the Moon Treaty. Korea has enacted three national legislations relating to space development as follows: Aerospace Industry Development Promotion Act of 1987, Outer Space Development Promotion Act of 2005, Outer Space Damage Compensation Act of 2008. The Outer Space Treaty of 1967 regulates the international responsibility for national activities in outer space, the national tort liability for damage by space launching object, the national measures for dispute prevention and international consultation in the exploration and use of outer space, the joint resolution of practical questions by international inter-governmental organizations in the exploration and use of outer space. The Liability Convention of 1972 regulates the absolute liability by a launching state, the faulty liability by a launching state, the joint and several liability by a launching state, the person claiming for compensation, the claim method for compensation, the claim period of compensation, the claim for compensation and local remedy, the compensation amount for damage by a launching state, the establishment of the Claims Commission. The Outer Space Damage Compensation Act of 2008 in Korea regulates the definition of space damage, the relation of the Outer Space Damage Compensation Act and the international treaty, the non-faulty liability for damage by a launching person, the concentration of liability and recourse by a launching person, the exclusion of application of the Product Liability Act, the limit amount of the liability for damage by a launching person, the cover of the liability insurance by a launching person, the measures and assistance by the government in case of occurring the space damage, the exercise period of the claim right of compensation for damage. The Liability Convention of 1972 should be improved as follows: the problem in respect of the claimer of compensation for damage, the problem in respect of the efficiency of decision by the Claims Commission. The Outer Space Damage Compensation Act of 2008 in Korea should be improved as follows: the inclusion of indirect damage into the definition of space damage, the change of currency unit of the limit amount of liability for damage, the establishment of joint and several liability and recourse right for damage by space joint launching person, the establishment of the Space Damage Compensation Review Commission. The 1998 Final Draft Convention on the Settlement of Disputes Related to Space Activities of 1998 by ILA regulates the binding procedure and non-binding settlement procedure for the disputes in respect of space activity. The non-binding procedure regulates the negotiation or the peaceful means and compromise for dispute settlement. The binding procedure regulates the choice of a means among the following means: International Space Law Court if it will be established, International Court of Justice, and Arbitration Court. The above final Draft Convention by ILA will be a model for the innovative development in respect of the peaceful settlement of disputes with reference to space activity and will be useful for establishing the frame of practicable dispute settlement. Korea has built the space center at Oinarodo, Goheung Province in June 2009. Korea has launched the first small launch vehicle KSLV-1 at the Naro Space Center in August 2009 and June 2010. In Korea, it will be the possibility to be occurred the problems relating to the international responsibility and dispute settlement, and the liability for space damage in the course of space activity. Accordingly the Korean government and launching organization should make the legal and systematic policy to cope with such problems.